Instrukcja obsługi AXESS AXDSPL-SP


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AXESS AXDSPL-SP (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 5.0 gwiazdek

Strona 1/1
AXDSPL-SP
INSTALLATION I NSTRUC T IONS
REV. 5/1/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
16-pin Header
AX-DSPL-SP
AX-DSPL-SP
The AXDSPL-SP will be used for adding a
Toslink digital output to the AXDSP-L.
1. Unplug the
Important! AXDSP-L from the vehicle.
2. Remove (4) Phillips screws securing the AXDSP-L interface, then
remove the top cover, exposing the circuit board within.
3. Locate the 16-pin header on the circuit board.
4. Carefully line up the header pins to the Toslink
Important!
interface, with the Toslink port facing outward. Gently press
down to secure.
Both interfaces may be damaged if installed wrong.Note:
5. Reinstall the top cover provided with the AXDSPL-SP to complete
the installation.


Specyfikacje produktu

Marka: AXESS
Kategoria: Niesklasyfikowane
Model: AXDSPL-SP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AXESS AXDSPL-SP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą