Instrukcja obsługi Axxess AX-ADBOX1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Axxess AX-ADBOX1 (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 44 osób i została oceniona przez 22.5 użytkowników na średnio 4.3 gwiazdek

Strona 1/8
Installation instructions for AX-ADBOX1
REV. 9/14/2015 INSTAX-ADBOX1
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
axxessinterfaces.com metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
Axxess Integrate
Note: This is a general list for the AX-ADBOX1 lineup. Please see the individual
harnesses for exact features available.
Provides accessory (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Used in amplified, non-amplified systems
Retains chimes (GM)
Turn signal click (GM)
Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)
Pre-wired ASWC-1 harness included (ASWC-1 sold separately)
Retains OnStar/OE Bluetooth
Adjustable gain control for overall volume (on amplified systems)
Adjustable gain control for chimes and OnStar (GM)
Retains SYNC in Ford (if equipped)
Adjustable gain control for SYNC (Ford)
Retains Blind spot detection system in Chrysler/Dodge/Jeep (if equipped)
High level speaker input
Micro “B” USB updatable
Retains balance and fade
Retains digital fade (excluding Ford and VW vehicles)
FEATURES
• Cutting tool • Crimping tool • Tape • Connectors
(example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
AX-ADBOX Series main interface control box
AX-ADBOX1 interface
• 16-pin harness with stripped leads
INTERFACE COMPONENTS
APPLICATIONS
See application list inside


Specyfikacje produktu

Marka: Axxess
Kategoria: nieskategoryzowany
Model: AX-ADBOX1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Axxess AX-ADBOX1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Axxess

Axxess

Axxess AX-MITSUCAM Instrukcja

10 Września 2024
Axxess

Axxess AXI-NI24-R Instrukcja

10 Września 2024
Axxess

Axxess AX-SUB28SWC Instrukcja

10 Września 2024
Axxess

Axxess 70-8215AMP Instrukcja

10 Września 2024
Axxess

Axxess HDCC-02 Instrukcja

10 Września 2024
Axxess

Axxess AX-TOYCAM1 Instrukcja

10 Września 2024
Axxess

Axxess AX-TOYCAM2 Instrukcja

10 Września 2024
Axxess

Axxess AX-TOYCAM3 Instrukcja

10 Września 2024
Axxess

Axxess AX-TOYRSAV Instrukcja

10 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024