Instrukcja obsługi Backyard Pro HLS-1650A
Backyard Pro
Maszyna do piłowania
HLS-1650A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Backyard Pro HLS-1650A (10 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.5 gwiazdek
Strona 1/10
65” BLADE TABLETOP
BUTCHER SAW
INSTRUCTION MANUAL
WARNING
08/2021#554BSSW65AL
Read carefully and understand all INSTRUCTIONS before operang. Failure to follow the safety
rules and other basic safety precauons may result in serious personal injury.
Save these instrucons in a safe place and keep them close at hand so they can be read when
required or used to assist in future servicing.
Warnings
WARNING
Read carefully and understand all INSTRUCTIONS before operang. Failure to
follow the safety rules and other basic safety precauons may result in
serious personal injury. Save these instrucons in a safe place and on hand
so that they can be read when required.
Motor 110V/60Hz/1HP (750W)
Blade 65”L (1650mm) x 3/5”W (16mm)
Blade Speed 50.1’/Second
Cung Thickness 8-1/4” (210mm)
Max Cung Height 7-1/16” (179mm)
Table Size 18-1/4” x 17-1/4” (464mmx439mm)
Overall Dimensions 21”L x 20”W x 37”H (530x515x955mm)
TECHNICAL DETAILS
Warnings
GENERAL SAFETY WARNINGS AND PRECAUTIONS
Helpful Hints
• KEEP WORK AREA CLEAN AND DRY. Cluered, damp or wet work areas can cause injuries.
• KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.
• STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry locaon
to prevent rust. Always lock up tools and equipment and keep out of reach of children.
• USE EYE AND HEARING PROTECTION. Wear ANSI- approved safety impact eyeglasses and ANSI-
approved hearing protecon when using this product.
• DRESS SAFELY. Non-skid footwear or safety shoes should be used when working with this product.
Do not wear loose clothing or jewelry as either can become caught in moving parts. Wear a
protecve hair covering to prevent long hair from becoming caught in moving parts.
• DO NOT OVERREACH. Keep proper foong and balance at all mes to prevent tripping, falling, back
injury, etc.
• STAY ALERT. Watch what you are doing at all mes. Do not use this product when you are red or
distracted from the job at hand.
• CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate
properly and perform its intended funcon. Check for damaged parts and any other condions that
may aect the operaon of this product. Replace or repair damaged or worn parts immediately.
• REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only idencal replacement parts.
Only use accessories intended for use with this product.
• MAINTAIN THIS PRODUCT WITH CARE. Keep this tool clean and dry and keep saw blades clean and
sharp for a beer, safer performance.
• MAINTENANCE. For your safety, service and maintenance should be performed regularly by a
qualied technician.
PRODUCT USE
• This tabletop saw is to be used for cung meat, frozen meat and bones.
• The butcher saw is ed with a machine casing, a motor, a top and belt wheel, a saw blade, and a
working table.
• Under normal condions the saw blade should be replaced aer sawing 4400 Ib. of meat or bones.
Specyfikacje produktu
| Marka: | Backyard Pro |
| Kategoria: | Maszyna do piłowania |
| Model: | HLS-1650A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Backyard Pro HLS-1650A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Backyard Pro
27 Grudnia 2024
Instrukcje Maszyna do piłowania
- Maszyna do piłowania FIXIT
- Maszyna do piłowania Workzone
- Maszyna do piłowania PowerPlus
- Maszyna do piłowania Worx
- Maszyna do piłowania Ozito
- Maszyna do piłowania Cotech
- Maszyna do piłowania IKRA
- Maszyna do piłowania RYOBI
- Maszyna do piłowania ATIKA
- Maszyna do piłowania Brennenstuhl
- Maszyna do piłowania Vulcan
- Maszyna do piłowania Cobra
- Maszyna do piłowania Challenge Xtreme
- Maszyna do piłowania Ultranatura
- Maszyna do piłowania Pro-Cut
Najnowsze instrukcje dla Maszyna do piłowania
3 Kwietnia 2025
3 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025