Instrukcja obsługi Black & Decker BDL110S
Black & Decker
wskaźnik laserowy
BDL110S
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker BDL110S (6 stron) w kategorii wskaźnik laserowy. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.4 gwiazdek
Strona 1/6
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Safety Instructions
• Do not operate the laser in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
• Use the laser only with the specifically designated batteries. Use of any other batteries
may create a risk of fire.
• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous
in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one laser, may create a risk of injury when used on
another laser.
• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye
injury could result.
• Do not place the laser in a position which may cause anyone to intentionally or
unintentionally stare into the laser beam. Serious eye injury could result
• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring
into the laser beam.
• Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed
by unqualified personnel could result in serious injury.
• WARNING: DO NOT DISASSEMBLE THE LASER. There are no user serviceable
parts inside. Disassembling the Laser will void all warranties on the product. Do not modify
the product in any way. Modifying the tool may result in Hazardous Laser Radiation
Exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious eye
injury may result.
• Do not remove or deface warning labels. Removing labels increases the risk of exposure
to radiation.
• Position the laser securely. Damage to the laser or serious injury could result if the laser
falls.
•CAUTION: Occasionally, pipes and electrical wiring may not be detected by this
product. The sensor will not detect hot wires inside metal pipe or metal conduit, behind
metallic wall covering, or behind some plywood or other dense materials.
•CAUTION: Material thickness, type of material, moisture content, and other variables
can effect sensing results. The sensor may detect electric wiring or pipes in the same
manner that studs are detected depending on their location to the wall surface. Use
caution when drilling, nailing or cutting into walls, floors and ceilings which may contain
electrical wiring or pipes. These items may be detected by the sensor in the same manner
in which studs are detected. Because studs are normally spaced 16 inches (406 mm) or
24 inches (610 mm) apart and are usually 1-1/2 inches (38 mm) wide, beware of anything
closer together or of a different width. Always turn off the power when working near
electrical wires.
•CAUTION: Use of controls or adjustments or performance of procedures other than
those specified in this manual may result in hazardous laser radiation exposure.
• This product is intended for use in a temperature range of 41°F(5°C) - 104°F(40°C).
The label on your tool may include the following symbols.
V ..........................volts mW......................milliwatts
nm ........................wavelength in nanometers IIIa ......................Class IIIa Laser
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
B
B
B
B
B
B
B
B
B
Bu
u
u
u
u
u
u
u
u
ul
l
l
l
l
l
l
l
l
ll
l
l
l
l
l
l
l
l
ls
s
s
s
s
s
s
s
s
se
e
e
e
e
e
e
e
e
ey
y
y
y
y
y
y
y
y
ye
e
e
e
e
e
e
e
e
eT
T
T
T
T
T
T
T
T
TM
M
M
M
M
M
M
M
M
ML
L
L
L
L
L
L
L
L
La
a
a
a
a
a
a
a
a
as
s
s
s
s
s
s
s
s
se
e
e
e
e
e
e
e
e
er
r
r
r
r
r
r
r
r
r
L
L
L
L
L
L
L
L
L
Le
e
e
e
e
e
e
e
e
ev
v
v
v
v
v
v
v
v
ve
e
e
e
e
e
e
e
e
el
l
l
l
l
l
l
l
l
l
/
/
/
/
/
/
/
/
/
/
S
S
S
S
S
S
S
S
S
St
t
t
t
t
t
t
t
t
tu
u
u
u
u
u
u
u
u
ud
d
d
d
d
d
d
d
d
d
-
-
-
-
-
-
-
-
-
-
M
M
M
M
M
M
M
M
M
Me
e
e
e
e
e
e
e
e
et
t
t
t
t
t
t
t
t
ta
a
a
a
a
a
a
a
a
al
l
l
l
l
l
l
l
l
l
-
-
-
-
-
-
-
-
-
-
A
A
A
A
A
A
A
A
A
AC
C
C
C
C
C
C
C
C
C
W
W
W
W
W
W
W
W
W
Wi
i
i
i
i
i
i
i
i
ir
r
r
r
r
r
r
r
r
ri
i
i
i
i
i
i
i
i
in
n
n
n
n
n
n
n
n
ng
g
g
g
g
g
g
g
g
g
S
S
S
S
S
S
S
S
S
Se
e
e
e
e
e
e
e
e
en
n
n
n
n
n
n
n
n
ns
s
s
s
s
s
s
s
s
so
o
o
o
o
o
o
o
o
or
r
r
r
r
r
r
r
r
r
Cat No. BDL110S Form # 588032-00 (MAR-04) Copyright © 2004 Black & Decker Printed in China
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-54-HOW-TO (544-6986)
IF YOU SHOULD EXPERIENCE APROBLEM
WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-54-HOW-TO (544-6986)
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND
DATE CODE (e.g. 20000130M). IN MOST CASES, A REPRESENTATIVE CAN RESOLVEBLACK & DECKER
YOUR PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE US A CALL.
YOUR FEEDBACK IS VITAL TO BLACK & DECKER.
FEATURES
1.) Marking/Hanging Insert
2.) Detector Button
3.) Laser On/Off Button
4.) Metal Position
5.) Stud Position
6.) Slide Switch
7.) AC Wire Indicator LED
8.) Red LED’s (Light
Emitting Diodes)
9.) Green LED
10.) Self-Leveling Laser
Lines
11.) Battery Compartment
Cover
12.) Hanging Insert (keyhole)
13.) Spacer Insert
14.) Drywall Pin
1
3
4 5
2
Tayl
orMade
TaylorMade
TaylorMade
TaylorMade
TaylorMade
Bo n A i r
Bo
Bo
Bo
Bo
n
n
n
n
A
A
A
A ir
ir
ir
ir
C.C .
C.
C.
C.
C.
C
C
C
C.
.
.
.
Ta ylo
rMade
Bon Air
Bo
Bo
Bo
Bo
n
n
n
n
A
A
A
A
i
i
i
i
r
r
r
r
C.C
.
C.
C.
C.
C.
C.
C.
C.
C.
7
9
Before
Avant
Antes
After
Après
Después
Wall
Mur
Pared
Spacer
Pièce d’espacement
Pieza espaciadora
Catalog No. BDL110S
8
6
10
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | wskaźnik laserowy |
| Model: | BDL110S |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker BDL110S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje wskaźnik laserowy Black & Decker
16 Września 2024
31 Sierpnia 2024
28 Sierpnia 2024
28 Sierpnia 2024
24 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
22 Sierpnia 2024
19 Sierpnia 2024
13 Sierpnia 2024
Instrukcje wskaźnik laserowy
- Makita
- Joy-It
- Cocraft
- Leica
- Laserworld
- Bushnell
- Melinera
- BeamZ
- ADA
- Vernier
- GPO
- Perfect Choice
- Picotronic
- Klip Xtreme
- August
Najnowsze instrukcje dla wskaźnik laserowy
10 Lutego 2025
28 Stycznia 2025
28 Stycznia 2025
2 Stycznia 2025
31 Grudnia 2025
30 Grudnia 2025
6 Grudnia 2024
9 Października 2024
9 Października 2024
7 Października 2024