Instrukcja obsługi Bowers & Wilkins CDA-4D
Bowers & Wilkins
odbiornik
CDA-4D
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bowers & Wilkins CDA-4D (21 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.5 gwiazdek
Strona 1/21
CDA-4D
Distribution
Amplifier
2
ENGLISH
bowerswilkins.com
Welcome to Bowers & Wilkins and CDA-4D
Thank you for choosing Bowers & Wilkins. When John Bowers first established
our company, he did so in the belief that imaginative design, innovative
engineering and advanced technology were keys that could unlock the enjoyment
of audio in the home. His belief is one that we continue to share and inspires
every product we design, tailored for new audio experiences inside of the home.
CDA-4D distribution power amplifier can drive any Bowers & Wilkins custom
installation speaker to new heights of performance. Offering 4 channels of high
quality amplification, the CDA-4D can enable your home with sound yet takes
up minimal space thanks to its compact 1U design. CDA-4D configuration also
supports bridging of its Class D stereo channels into even more powerful mono
outputs, if needed. CDA-4D can be easily setup via the Product Configuration
page which allows customisable complex DSP tuning, offering wider flexibility
and integration offering to your installation.
Features
• 4 channel amplification in 2 zones with 125 watts
per channel delivering high-resolution audio.
• Engineered to work with Bowers & Wilkins installation
speakers and subwoofers.
• Highly flexible usage / configuration – Left/Right outputs can be bridged
to provide a mono output of double the power at 250 watts.
• Three power mode control options – on, auto detect or 12V trigger.
• Robust and reliable protection features, preventing damage
due to overload, short circuits or heat.
• Ultra-compact rack-mount design (1 rack unit).
• Product Configuration page allows customisable setup
for various use case configuration.
• Audio Video Bridging (AVB) compatible*.
*AVB is available when two or more Bowers & Wilkins CDA amplifiers (CDA-2HD or CDA-4D)
are connected to the same wired network using AVB enabled network hardware (AVB enabled switch).
Analogue or digital input sources from other CDA amplifiers can be selected as an input source.
AVB is a set of standards whose implementation varies from manufacturer to manufacturer.
As such we cannot guarantee AVB compatibility between Bowers and Wilkins devices
and other equipment or network hardware.
Note: Always check for the latest software
on the Bower & Wilkins website.
3
ENGLISH
M5 x 8mm M4 x 6mm
CLASS 2 WIRING
CÂBLAGE DE CLASSE 2
Connecting speaker wires or input cables
while the amplifier is powered may cause
electrical shock and could damage the
amplifier. Unplug the power cord before making
connections.
Connecter tous câbles d'entree ou de sortie
alors que l'amplificateur est sous tension
peut provoquer un choc électrique et
endommager l'amplificateur. Débranchez le cordon
d'alimentation avant d'effectuer les connexions.
Unit fuses may only be changed by skilled
personnel - fuse may be in the neutral,
mains should be disconnected to
de-energize the phase conductor.
Les fusibles de l'appareil ne peuvent être
changé par du personnel qualifie uniquement
fusible peut-être au neutre, le secteur
doit être déconnecté pour mettre hors tension le
conducteur de phase.
1. CDA-4D Carton Contents
a. 1 x CDA-4D
b. 2 x Rack-mount ears
c. 4 x Feet
d. 1 x Power cable
e. 4 x Rack-mount ear screws (M5 x 8mm)
f. 4 x Feet screws (M4 x 6mm)
g. 2 x 5.08mm Pitch 4-way Phoenix Combicon style
Diagram 1. Carton Contents
1x
a
1x
d
4x
e
4x
f
2x
g
2x
b
4x
c
Specyfikacje produktu
| Marka: | Bowers & Wilkins |
| Kategoria: | odbiornik |
| Model: | CDA-4D |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bowers & Wilkins CDA-4D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Bowers & Wilkins
3 Października 2024
3 Października 2024
29 Września 2024
13 Września 2024
8 Sierpnia 2024
Instrukcje odbiornik
- odbiornik Canyon
- odbiornik SilverCrest
- odbiornik Helix
- odbiornik Wireless Solution
- odbiornik Wet Sounds
- odbiornik Bresser
- odbiornik Peiying
- odbiornik Stewart
- odbiornik Naim
- odbiornik Metra
- odbiornik Markbass
- odbiornik Datapath
- odbiornik Soundstream
- odbiornik Sound Ordnance
- odbiornik NAD
Najnowsze instrukcje dla odbiornik
9 Kwietnia 2025
9 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025