Instrukcja obsługi Buffalo TS4400D

Buffalo serwer TS4400D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Buffalo TS4400D (4 stron) w kategorii serwer. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 12.5 użytkowników na średnio 4.3 gwiazdek

Strona 1/4
The TS4000 series will not work without disks. Please prepare 1 or more un-partitioned
HDDs for the setup process. Use either new HDD(s) or delete all partitions (and
therefore all data) with a partition editor before you start with existing HDD(s).
Step by step
1. Mount one or more HDDs to a frame and insert it in the TeraStation.
2. Prepare the MicroSD and the USB adapter and insert the USB
adapter into a USB 2.0 port, connect power and network.
3. Move the boot switch to USB position.
4. Boot the TeraStation.
Now the unit gives after some minutes a tone, the display
goes red and it says “push function button to start”.
5. Push the function button until beep sounds.
The display status color will be blue and sequence through these messages:
Recovery Preparing
System Recovering
FW/Updating
Recovery Finished, “Change Boot SW
Setup Guide
TeraStation 4000
www.buffalo-technology.com


Specyfikacje produktu

Marka: Buffalo
Kategoria: serwer
Model: TS4400D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Buffalo TS4400D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą