Instrukcja obsługi Byron BY212


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Byron BY212 (3 stron) w kategorii dzwonek do drzwi. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 10.5 użytkowników na średnio 5.0 gwiazdek

Strona 1/3
To select the Chime Volume level, press the ‘VOL
button on the chime There are 4 selectable volume
levels, the Door Chime is pre-set to the loudest
volume setting.
Volume
Default
Functions:
ON
1: plug Chime into a UK 3pin
socket, 220 – 240V ~ 50Hz.
2: Switch the socket on.
1: plug Chime into a UK 3pin
socket, 220 – 240V ~ 50Hz.
2: Switch the socket on.
3: Chime will ‘Beep’ on Start
4
Plug-in & Portable
Wire Free Chime Kit
1:
2:
4:
:3
7:
5:
BY212
1: Push Button 5: Portable Chime
2: Melody Selector 6: Speaker
3: Bell Push Battery 7: Volume control
4: Signal Sent LED 8: Plug-in Chime
ON
6: 6:
8:
7:
1: Place a small flat screwdriver
into the locking clip on the
base of the Bell Push
2: Gently twist
3: The backing plate will unclip
1
31: Remove the battery cover of
the Door Chime.
2: Insert 3 X 1.5V SizeAA
batteries (Not Supplied).
3: Make sure the
Positive/Negative terminals
match the internal markings.
4: Chime will ‘Beep’ on Start up.
5: Replace the battery cover
3 x 1.5V ‘AA’
6 Selectable Melodies
1: Tubular 3-Note 4: Solo
2: Big Ben 5: Tubular Score
3: Tubular 2-Note 6: Clarinet
To select a melody for the Door Chime
1: Remove the Back Plate from the Bell
Push
2: Press the Melody Select button.
3:The chime will play the newly selected
sound
4: Press again to select the next melody.
Note: For Front/Back door setup, select a
different melody in one of the Bell Pushes.
CR2032
1: Press and hold the ‘VOL
buttons on both Door
Chimes, until the Chimes
‘Beep Beep’ (6 Seconds)
2: Press the Bell Push within
60 seconds to learn the
Bell Push to the chimes.
3: The Chimes will ring to
confirm setup, wait 60
seconds for the Chimes
to exit the learn mode
before repressing the Bell
Push.
5
Beep
Beep
Beep
Beep
New Chime
Additional Chime
To add an additional Chime unit to the Door Chime kit
1: Press and hold the ‘VOL’ button on your New Door Chime, until the
Chime goes ‘Beep Beep’ (6 Seconds)
2: Press the Bell Push within 60 seconds to learn the additional
Chime to the Bell Push.
3: Chime will ring to confirm setup, wait 60 seconds for the Chime to
exit the learn mode before repressing the bell push.
Adding Additional Chime/Bell Push:
Beep
Beep
Additional Bell Push
To add an additional Bell Push to the Door
Chime kit
1: Press and hold the ‘VOL’ button on your
Door Chime, until the Chime goes
‘Beep Beep’ (6 Seconds)
2: Press the Bell Push within 60 seconds
to learn the additional Bell Push to the
Chime
3: Chime will ring to confirm setup, wait 60 seconds for the Chime
to exit the learn mode before repressing the bell push.
For Front/back door setup, select a different melody in one of
the Bell Pushes - .See Melody Selection
Note: Maximum of 6 Bell Pushes can be learnt to a single Chime
Front Door
Back Door
1: Insert CR2032 battery
(Supplied) into the battery
holder.
2: Make sure the positive side
is facing upwards.
3: Replace back plate.
2
Warning: Make sure that the batteries are
replaced correctly to avoid battery failure.
Only replace with same or equivalent type.


Specyfikacje produktu

Marka: Byron
Kategoria: dzwonek do drzwi
Model: BY212

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Byron BY212, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje dzwonek do drzwi Byron

Byron

Byron DBW-21025 Instrukcja

27 Września 2024
Byron

Byron DBY-23512 Instrukcja

27 Września 2024
Byron

Byron B421E Instrukcja

27 Września 2024
Byron

Byron B432E Instrukcja

27 Września 2024
Byron

Byron BY216E Instrukcja

27 Września 2024
Byron

Byron BY236E Instrukcja

27 Września 2024
Byron

Byron SX7 Instrukcja

27 Września 2024
Byron

Byron DBY-22312 Instrukcja

25 Września 2024
Byron

Byron DBY-24112 Instrukcja

24 Września 2024
Byron

Byron DBY-22314 Instrukcja

23 Września 2024

Instrukcje dzwonek do drzwi

Najnowsze instrukcje dla dzwonek do drzwi