Instrukcja obsługi Byron MP001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Byron MP001 (4 stron) w kategorii dzwonek do drzwi. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6 użytkowników na średnio 4.9 gwiazdek

MP3 Downloadable

Wire Free Chime Kit

™41: Press the Bell Push to

confirm the setup

2: The Chime will play the

melody and the alert light will

flash.

4

2

1: Place a small flat screwdriver

into the locking clip on the

base of the Bell Push.

2: Gently twist.

3: The backing plate will unclip.

1

™

1: Push Button 6: Portable Chime

2: Melody Selector 7: Speaker

3: Bell Push Battery 8: Volume Control

4: Signal Sent LED 9: LED Alert

5: USB Lead 10: USB Input

MP001

™

:3

1:

4: 10:

8:

9:

5:

6:

2:

31: Remove the battery cover.

2: Insert 3 X 1.5V Size ‘AA’

batteries (Not Supplied).

3: Make sure the

Positive/Negative terminals

match the internal markings

4: switch the Chime ON

5: Replace the battery cover.

1: Insert CR2032 battery

(Supplied) into the battery

holder.

2: Make sure the positive side

is facing upwards.

3: Replace back plate.

Warning: Make sure that the batteries are

replaced correctly to avoid battery failure.

Only replace with same or equivalent type.

3

Downloading MP3 Melody:

Functions:

To select the Chime Volume

level, press the ‘+’ button

increase the volume and ‘-’

button to decrease the volume.

To select a melody for the Door Chime

1: Select between preprogrammed (IN) or

downloaded MP3 melodies (MP3).

2: Press the arrows on the door

chime to select the next melody

3: The chime will play the newly selected

melody

4: Press the centre button to confirm

Or press arrows to select the next

melody.

1: Connect the chime to the

USB port of a computer using

the USB lead (supplied ).

PC Only

2: The Chime will appear as a USB

storage device, install and run MP3

Editor.exe file on your computer.

MP3 Music

Look in:

Open

MP3 File(*.mp3)

File Name:

Files of Type:

Open

Cancel

Melody File 1

Melody File 2

Melody File 3

Melody File 4

3: Select the open file icon ,

highlight the required MP3 file on

your PC and click Open.

5: Edit the file length by inputting the required start and end times.

Use the Play/Pause button to listen to the mp3 file, recommended file

length is between 8-10sec.

5: Press the scissors icon to Cut and save the MP3 file, the

recommended file length is approximately long. 8-10 seconds

Melody File 1Melody File 2Melody File 3

BackSearch Folders

E:\Address

PC & Mac

6: Drag and drop the edited file onto the MP3 Chime, the file will be

saved on to the MP3 chimes internal memory.

00:00.0 / 00:00.0

00Start Time

End Time

00

00 00 0

0:

:

.

.Reset

RewindFast

Forward

Play Volume

Stop

Press to Cut

4: Highlight the MP3 file in the tunes list and press PLAY.

Video Tutorial:

View or video tutorial saved on the MP3 chime or via our

YouTube channel.

http://www.youtube.com/user/CHByron

Specyfikacje produktu