Instrukcja obsługi Canon Vixia HF M50

Canon kamera wideo Vixia HF M50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Vixia HF M50 (246 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/246

PUB. DIE-0416-000

HD Camcorder

Instruction Manual

- ,

Int r od uct ion

Important Usage Instructions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright

owners and be contrary to copyright laws.

The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable

to disconnect the plug in case of an accident.

CAUTION:

• Danger of explosion if the wrong type of batteries are attached. Use only the same type of batteries.

• Do not expose batteries or product to excessive heat such as the inside of a car under

direct sunlight, fire, etc.

While using the compact power adapter, do not wrap it or cover it with a piece of cloth, and do

not place it in confined narrow spaces.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECT RIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the literature accompanying

the product.

FCC/IC NOTICE

HD Camcorder, VIXIA HF M52 / VIXIA HF M50 / VIXIA HF M500 systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and use in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual.

If such changes or modifications should be made, you could be required to stop operation of the

equipment.

Model ID0008 (including WLAN Module Model WM217)

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

The available scientific evidence does not show that any health problems are associated with using

low-power wireless devices. There is no proof, however, that these low power wireless devices are

absolutely safe. Low-power wireless devices emit low levels of radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce health effects (by heating

tissue), exposure to low-level RF that does not produce heating effects causes no known adverse

health effects. Many studies of low-level RF exposures have not found any biological effects. Some

studies have suggested that some biological effects might occur, but such findings have not been

confirmed by additional research. This model has been tested and found to comply with FCC/IC

radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency

(RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)

Exposure rules.

Canon U.S.A., Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

This Class B digital apparatus complies with Canadian ICES-003.

Specyfikacje produktu

Marka:	Canon
Kategoria:	kamera wideo
Model:	Vixia HF M50
Kolor produktu:	Czarny
Tryb wyłączenia:	1 W
Certyfikaty:	TCO’03, CE, CB, TÜV/GS, TÜV/Ergo, ISO13406-2, UL/cUL, Energy Star, FCC-B, NOM, GOST-R, BSMI, CCC,(PSB),(C-TICK), Green Mark, WEEE, RoHS
Długość przekątnej ekranu:	19 "
Zakres wilgotności względnej:	10 - 90 %
Rozdzielczość:	1280 x 1024 px
Współczynnik kontrastu (typowy):	700:1
Ekran dotykowy:	Nie
Pobór mocy:	36 W
Zakres temperatur (przechowywanie):	0 - 40 °C
Zasilanie:	AC 100 – 240V, 50/60Hz
Jasność wyświetlacza (typowa):	300 cd/m²
Kąt widzenia (poziomy):	160 °
Kąt widzenia (pionowy):	150 °
Kolory wyświetlacza:	16.78 millionów kolorów
Czas odpowiedzi (typowy):	8 ms
Rozmiar plamki:	0.294 mm
Interfejs do montażu panelu:	100 x 100 mm
Zakres kąta nachylenia:	5 - 20 °
Szerokość urządzenia (z podstawą):	416 mm
Głębokość urządzenia (z podstawą):	210 mm
Wysokość urządzenia (z podstawą):	428 mm
Waga (z podstawą):	4600 g
Obsługa funkcji Plug & Play:	Tak
Inne połączenia:	15-pin mini D-Sub
Część widoczna ekranu:	376 x 301 mm
Zabezpieczenia fizyczne:	Kensington security port