Instrukcja obsługi Chief Fusion LCB2X1UP
Chief
Wsparcie dla płaskich paneli
Fusion LCB2X1UP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief Fusion LCB2X1UP (16 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 3.5 gwiazdek
Strona 1/16
I N S T A L L A T I O N I N S T R U C T I O N S
LCB2X1U
LCB2X1UP
Ceiling-Mounted Back-to-Back Menu Boards
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
LCB2X1U / LCB2X1UP
LCB2X1U / LCB2X1UP Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
LCB2X1U/LCB2X1UP models does not exceed maximum
weights listed in Table 1.
Table 1: Weight Capacity
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Do not use this product outdoors.
NOTE: The LCB2X1U and
LCB2X1UP ceiling mounted back-
to-back menu boards are intended to be used with the
UL Listed CPA Ceiling Plates (not included): CPA330,
CPA365, CPA395 and UL Listed extension brackets
FCAX08, FCAX14 and FCAX20.
The following UL Listed Chief ceiling plates WITHOUT
swaged collars (not included) may also be used:
CMA330, CMA345, CMA395.
--SAVE THESE INSTRUCTIONS--
MODEL Max Weight
Allowed for EACH
Display
Max Weight
Capacity of
Mounting System
LCB2X1U 100 lbs
(45.4 kg)
400 lbs
(181.4 kg)
LCB2X1UP 100 lbs
(45.4 kg)
400 lbs
(181.4 kg)
Installation Instructions LCB2X1U / LCB2X1UP
3
DIMENSIONS
DIMENSIONS: INCHES
[MILLIMETERS]
LCB2X1U
DIMENSIONS: INCHES
[MILLIMETERS]
LCB2X1U
15.75
400.0
[400mm
Mounting Pattern]
Specyfikacje produktu
| Marka: | Chief |
| Kategoria: | Wsparcie dla płaskich paneli |
| Model: | Fusion LCB2X1UP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Chief Fusion LCB2X1UP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wsparcie dla płaskich paneli Chief
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
Instrukcje Wsparcie dla płaskich paneli
- Wsparcie dla płaskich paneli Sanus
- Wsparcie dla płaskich paneli Walker Edison
- Wsparcie dla płaskich paneli Nabo
- Wsparcie dla płaskich paneli Elite Screens
- Wsparcie dla płaskich paneli Pyle
- Wsparcie dla płaskich paneli Da-Lite
- Wsparcie dla płaskich paneli Rocstor
- Wsparcie dla płaskich paneli InFocus
- Wsparcie dla płaskich paneli Premier Mounts
- Wsparcie dla płaskich paneli DQ
- Wsparcie dla płaskich paneli NeoMounts
- Wsparcie dla płaskich paneli Marantz
- Wsparcie dla płaskich paneli SunBriteTV
- Wsparcie dla płaskich paneli Kensington
- Wsparcie dla płaskich paneli Helder
Najnowsze instrukcje dla Wsparcie dla płaskich paneli
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025
16 Stycznia 2025