Instrukcja obsługi Chief SLM520


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief SLM520 (1 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.6 gwiazdek

Strona 1/1
8802-000100 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-520 H
ANGER
B
RACKET
for Sharp PG-M20X, PG-M25X,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-520 Bracket (3) M3 -16mm Flat Head Screw
(4) 10 - 24 Thumb Nuts (3) 1/2" x .218 x 1/4" Nylon Spacer
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the three ¼” nylon spacers over the three threaded inserts in the bottom of the
projector.
3. Place the SLB-520 bracket onto the three ¼” nylon spacers on the bottom of the projector
lining up the three mounting holes in the bracket with the three nylon spacers.
4. Using the three M3 x 16mm flat head screws, start them into the three threaded inserts
and tighten all fasteners at this time, securing the bracket to the projector. CAUTION:
When attaching the mount be careful not to overtighten screws.
5. See RPA and/or Smart-Lift™ Instructions.


Specyfikacje produktu

Marka: Chief
Kategoria: Akcesoria do projektora
Model: SLM520

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief SLM520, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą