Instrukcja obsługi Christie Spyder X80
Christie
nieskategoryzowany
Spyder X80
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Christie Spyder X80 (24 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.0 gwiazdek
Strona 1/24

Product Safety Guide
020-102023-01
Spyder X80

Important Safety
Information
Read this document carefully before installing or oper
ating the
Spyder X80. Store the document in a location close to the
Spyder X80 for future reference.
For installation, setup, and user information, see the product
documentation available on the USB flash drive or access the
documentation from the Christie Digital Systems USA Inc.
website at www.christiedigital.com. Read all instructions before
using or servicing this product.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this
product to rain or moisture.
Do not alter the power plug, o
verload the power
outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to
service the product.
Electrical Hazard
Risk of electric shock.
Do not remov
e the product enclosure.
Only Christie qualified technicians are authorized to
service the product.
Notation
Learn the hazard and information symbols used in the product
documentation.
Danger messages indicate a hazardous situation
which, if not av
oided, results in death or serious
injury.
Warning messages indicate a hazardous situation
which, if not av
oided, could result in death or
serious injury.
Caution messages indicate a hazardous situation
which, if not av
oided, could result in minor or
moderate injury.
Notice messages indicate a hazardous situation
which, if not av
oided, may result in equipment or
property damage.
Information messages provide additional
information, emphasize or pro
vide a useful tip.
Important safeguards
To prev
ent personal injury and to protect the device from
damage, read and follow these safety precautions.
General safety precautions
Warning! If not av
oided, the following could result in
death or serious injury.
• SHOCK HAZARD! Disconnect the product from AC before
moving, servicing, cleaning, remo
ving components, or
opening any enclosure.
• A minimum of two people or appropriately rated lift
equipment is required to safely lift, install, or move the
product.
• Motors and fans may start without warning.
Power precautions
Warning! If not a
v
oided, the following could result in
death or serious injury.
• FIRE AND SHOCK HAZARD! Do not operate the system
unless certified power connections, providing the
recommended v
oltage, are used.
Caution! If not av
oided, the following could result in
minor or moderate injury.
• SHOCK HAZARD! Only use the AC power cord provided
with the product or recommended by
Christie.
• TRIP OR FIRE HAZARD! Position all cables where they
cannot contact hot surfaces, be pulled, be tripped over,
or damaged by persons walking on or objects rolling over
the cables.
• FIRE HAZARD! Do not use a power cord, harness, or
cable that appears damaged.
• FIRE OR SHOCK HAZARD! Do not overload power outlets
and extension cords.
• SHOCK HAZARD! The AC power cord must be inserted
into an outlet with grounding.
• SHOCK HAZARD! Do not attempt operation if the AC
supply is not within the specified voltage and power
range, as specified on the license label.
Power requirements
Description Details
Input voltage
90-264 V~, 50-60 Hz, 14A, 75 watts
Maximum power dra
w: 1680 watts
Technical support
• North and South America: +1-800-221-8025 or
Support.Americas@christiedigital.com
Spyder X80 Product Safety Guide 2
020-102023-01 Rev
. 1 (07-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.

• Europe, Middle East, and Africa: +44 (0) 1189 778111 or
Support.EMEA@christiedigital.com
• Asia P
acific: +65 6877-8737 or
Support.APAC@christiedigital.com
Important Safety Information
Spyder X80 Product Safety Guide 3
020-102023-01 Rev
. 1 (07-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
Specyfikacje produktu
Marka: | Christie |
Kategoria: | nieskategoryzowany |
Model: | Spyder X80 |
Kolor produktu: | Czarny |
Wbudowany wyświetlacz: | Tak |
Typ wyświetlacza: | LCD |
Częstotliwość wejściowa AC: | 50 - 60 Hz |
Napięcie wejściowe AC: | 90 - 264 V |
Wysokość produktu: | 261 mm |
Szerokość produktu: | 441 mm |
Głębokość produktu: | 598 mm |
Waga produktu: | 36170 g |
Podręcznik użytkownika: | Tak |
Szerokość opakowania: | 584 mm |
Wysokość opakowania: | 414 mm |
Głębokość opakowania: | 786 mm |
Maksymalne zużycie mocy: | 1680 W |
Prędkość transferu danych przez Ethernet LAN: | 10,100,1000 Mbit/s |
Zakres temperatur (eksploatacja): | 5 - 35 °C |
Zakres wilgotności względnej: | 20 - 80 % |
Przewodowa sieć LAN: | Tak |
Waga wraz z opakowaniem: | 49490 g |
HDCP: | Tak |
Możliwości montowania w stelażu: | Tak |
HDMI in: | 1 |
Ilość portów RJ-45: | 1 |
Wejścia BNC: | 1 |
Złącze RS-232/422: | Tak |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Christie Spyder X80, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Christie
13 Września 2024
Instrukcje nieskategoryzowany
- nieskategoryzowany Contemporary Research
- nieskategoryzowany Thermex
- nieskategoryzowany Wimberley
- nieskategoryzowany Yamaha
- nieskategoryzowany Sôlt
- nieskategoryzowany Razor
- nieskategoryzowany SMS
- nieskategoryzowany TC Electronic
- nieskategoryzowany Uniden
- nieskategoryzowany Lumantek
- nieskategoryzowany Alfatron
- nieskategoryzowany Ninja
- nieskategoryzowany Balay
- nieskategoryzowany Amer
- nieskategoryzowany Plant Craft
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024