Instrukcja obsługi Clockaudio CRM 203-RF
Clockaudio
mikrofon
CRM 203-RF
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Clockaudio CRM 203-RF (1 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.9 gwiazdek
Strona 1/1
www.clockaudio.com
© Clockaudio. All rights reserved.
Product specicaons subject to change without nocaon.
02-2019-V1.00
Installation guide
1) Drill a 58mm (2.25”) hole through the table ig A). (F
2) Remove the nut and t the CRM 203-RF microphone
through the 58mm (2.25 hole see ”) (Fig B).
3) Replace nut and ghten to the underside of the table
(Fig C).
4) Microphone connecons: mic A white cable in line
with screws, mic B (90 deg from mic A) black cable
and mic C (90 deg from mic A) black cable with red
tag. For the three mics, Red Phase +, White Phase –
and screen Ground.
5) Using p-clamps provided x cables to the underside
of the table ensuring there is sucient slack in the
cable loom for the mic to operate ig D) (F .
Grey 2 core (red and blue wires) is to be used for remote
switching, screen is not used. Also note switch is open circuit
when the mic is down. Please take note programming will be
needed on the DSP side to allow the microphone to be
muted once retracted.
CRM 203- RF
The CRM 203-RF is a tri-element boundary layer through table cardioid condenser microphone, with a built-in
mechanism that will allows users to retract the microphone fully into the table. Engineered in high quality brass
with built in shock mount and RF lter. Available in black Nextel (CRM 203-RF) or san nickel (CRM 203N-RF).
Oering 3 independently wired mics a + b + c.
Fied with a magnec reed switch designed to prevent unwanted feedback
from retracted microphones on power up. The switch contact is closed (ON)
when the microphones are in the raised posion and open (OFF) when
retracted. This is not designed to be used for privacy mung.
Easy to Install.
Low prole at surface level
Unique ability to lock capsules away from sight when not in use
Robust brass construcon
Cardioid polar paern
Built in RF lter
Balanced output
Supplied with 3 x 2m (6.6) 2 core + screen audio cable and 1 x grey 2 core
cable for internal reed switch
San Nickel (CRM 203N-RF) or Black Nextel (CRM 203-RF)
Fig D, key:
1) Head in raised posion.
2) Loop cable allowing at
least 25mm (1”) out of
the boom of the CRM.
3) Fit supplied P-clamp
using self-tap screws.
4) White audio cable mic A.
5) Black audio cable mic B.
6) Black with red tag audio
cable mic C.
7) Securing Nut.
8) Grey switch cable red
and blue cores.
Fig A
Fig B
Fig C
Mic A
Mic C
Mic B
Securing Nut
Specyfikacje produktu
| Marka: | Clockaudio |
| Kategoria: | mikrofon |
| Model: | CRM 203-RF |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Clockaudio CRM 203-RF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikrofon Clockaudio
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
Instrukcje mikrofon
- mikrofon Microtech Gefell
- mikrofon Audient
- mikrofon Roland
- mikrofon Anywhere Cart
- mikrofon DJI
- mikrofon Fenton
- mikrofon CAD Audio
- mikrofon KeepOut
- mikrofon Kenwood
- mikrofon Bogen
- mikrofon Pure Acoustics
- mikrofon Vtech
- mikrofon Neumann
- mikrofon Golden Age Project
- mikrofon Ultimate Support
Najnowsze instrukcje dla mikrofon
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025