Instrukcja obsługi Cotech HK-LB644A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech HK-LB644A (5 stron) w kategorii Lampa. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 12.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/5
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
1
2
3
Ver. 20171005
30W LED Floodlight
Art.no 36-6508 Model HK-LB644A
36-6509 HK-LB644A
Please read theentire instruction manual before using theproduct and then
save it for future reference. We reserve theright for any errors in text or images
and any necessary changes made to technicaldata. If you have any questions
concerning technical problems please contact our Customer Services.
Safety
• TheLEDs in this floodlight have avery intensive light output. Donot let
children play with thefloodlight. Donot look directly into thelight or direct
thelight into another person’s eyes, doing so could cause eye damage.
• Do not touch thehousing or glass of thefloodlight when it is switched on –
risk of burn injury.
• Do not install thefloodlight near flammable materials or surfaces.
• Do not cover thefloodlight.
• Do not dismantle or modify thefloodlight.
• Thefloodlight is suitable for use in temperatures between −20 and +50 °C.
• Thefloodlight must only be used with a230V supply with aprotectiveearth.
• Any fault or damage must be repaired immediately by aqualified electrician
before thefloodlight isused.
• Do not use thefloodlight near combustible or explosive liquids, solids orgases.
• Treat thelight with care and do not subject it to shocks or impacts.
• Thefloodlight must not be immersed in water or other liquid.
• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or qualified persons in order to avoid a hazard.
• Thefloodlight may be mounted on plasterboard, wooden or brickwalls.
Itmust not be mounted on walls made of or coated with flammable materials
such as polystyrene or plastic. Donot install thefloodlight on damp surfaces
or conductive metal surfaces.
• Thefloodlight must not be placed close to flammable material.
• Ensure that thefloodlight is installed in such away that air is free to circulate
aroundit.
• Make sure that theplace on thewall where you have chosen to mount
thefloodlight is free from hidden electrical conduit or plumbing before drilling
anyholes.
7. Tilt thelamp housing to
thedesired angle and tighten
thelocking screws (1).
Installation
• Readtheentire instruction manual before installation. Important:
Theinstallation should be carried out by aqualified electrician and conform
to current regulations.
• Warning: Makesure that thepower is turned off and that thefuse is
removed before beginning any installation or service.
• Thefloodlight must only be connected to a230V, 50Hz power supply.
• Warning: Makesure that thechosen wall mounting area is free from
electrical conduit or plumbing.
1. Thefloodlight is intended for fixed installation and should be connected to
acircuit protected by asafety device such residual current circuit breaker
(RCCB/RCD).
2. Mark out theposition of themounting holes on thewall using thewall
bracket (2) as atemplate. Drill holes for themounting screws. Use suitable
screws (and wall plugs if necessary). Thefloodlight must be fixed securely.
3. Screw thefloodlight onto thewall bracket.
4. Thefloodlight has 50 cm connection cable. It should be connected to
awatertight connection box (sold separately) with astrain relief (as pictured).
5. Use theconnection box as atemplate to mark out theposition of
themounting holes. Make sure that themounting surface is flat. Drill holes
for themounting screws. Use suitable screws (and wall plugs if necessary).
6. Connect thethree wires: L Live (brown), N Neutral (blue) and Protective Earth
(green/yellow).
Care and maintenance
• Disconnect (isolate) thefloodlight from thepower supply and allow it to cool
before cleaning.
• Clean thelight using asoft, dampcloth. Useamild detergent. Neveruse
solvents or strong, abrasive cleaning agents.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. Whenrecycling
your product, take it to your local collection facility or contact
theplace of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Voltage 220–240 V, 50 Hz
Power 30W
Light source COB/Bridgelux LED (non replaceable)
Luminousflux 3000lm
Colour temperature 4000K
Colour rendition > 80 Ra
Beamangle 120°
Ingress protection IP65
Protectionclass Class1 (this light fitting must be earthed)
Size 175×164×65mm
Thelight source contained in this luminaire shall only
be replaced by themanufacturer or his service agent
or asimilar qualified person.
Product description
1. Locking screws
2. Wallbracket
3. Lamphousing
Placement
• Thefloodlight is approved for outdooruse.
• Thefloodlight must not be used in explosive environments or close to chemicals.
Specyfikacje produktu
| Marka: | Cotech |
| Kategoria: | Lampa |
| Model: | HK-LB644A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cotech HK-LB644A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Lampa Cotech
1 Września 2024
31 Sierpnia 2024
31 Sierpnia 2024
19 Sierpnia 2024
18 Sierpnia 2024
Instrukcje Lampa
- Hatco
- Zhiyun
- Elation
- Luxform
- Kind LED
- Medisana
- Savio
- Profoto
- Digital Juice
- Goobay
- Paul Neuhaus
- Cateye
- Lirio By Philips
- Maxim
- Duronic
Najnowsze instrukcje dla Lampa
8 Kwietnia 2025
8 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025