Instrukcja obsługi Crestron DSP-1282

Crestron nieskategoryzowany DSP-1282

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron DSP-1282 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 31 osób i została oceniona przez 16 użytkowników na średnio 4.9 gwiazdek

Pobierz PDF

Strona 1/2

DO GUIDE

NOTE: Ensure that the computer that is running the Crestron Avia Audio tool and the DSP are on the same subnet.

Observe the following when connecting devices that are equipped with Dante

® network capability (DSP-1281 and DSP-1283):

• DANTE PRI ports should be connected to a gigabit switch serving the primary Dante network.

• (Optional) DANTE SEC ports should be connected to a gigabit switch serving the secondary Dante network.

• The primary Dante network should never mix with the secondary Dante network.

If unbalanced connections are required, refer to the following diagrams.

Front Panel

CAUTION: When connecting a Windows® 7 or Windows 8 computer to the COMPUTER port for the rst time, make sure the computer has a live connection

to the Internet. For more information, refer to Answer ID 5745 in the Online Help section of the Crestron website (support.crestron.com).

NOTE: The front panel’s COMPUTER port can be used to directly connect a computer running the Crestron Avia Audio tool, bypassing the LAN connection.

DSP-860/DSP-1280/DSP-1281/DSP-1282/DSP-1283

Crestron AviaTM Digital Signal Processors

The Crestron Avia™ DSP-860, DSP-1280, DSP-1281, DSP-1282, and DSP-1283 series of digital signal processors are functionally similar with varying

capabilities. For simplicity within this guide, the term “DSP” is used except where noted.

DO Install the Device

These devices occupy 1U of rack space. Use a #1 Phillips screwdriver to attach the two included rack ears to the device, and then mount the device into the

rack using four mounting screws (not included).

DO Connect the Device

Make the necessary connections as called out in the following diagrams. Connect power last.

Rear Panel

DO Check the Box

QUANTITY ITEM PART NUMBER

2 Bracket, Rack Ear, 1U 2032122

1 Cable, USB 2.0, A - B, 6’ (1.83 m) 2014966

1 Power Cord, 6' 7" (2 m) 2001134

DSP-860 Only

14 Connector, 3-Pin 2003575

DSP-1280, DSP-1281, DSP-1282, and DSP-1283 Only

20 Connector, 3-Pin 2003575

DSP-860

MIC/LINE INPUTS:

From microphone or

other audio sources

LINE OUTPUTS:

To audio ampliers or

other mixer inputs

POWER:

From

ac power outlet

LAN:

10/100/1000BASE-T

Ethernet to LAN

Ground

DSP-1280

MIC/LINE INPUTS:

From microphone or

other audio sources

LINE OUTPUTS:

To audio ampliers or

other mixer inputs

POWER:

From

ac power outlet

LAN:

10/100/1000BASE-T

Ethernet to LAN

Ground

DSP-1281

MIC/LINE INPUTS:

From microphone or

other audio sources

LINE OUTPUTS:

To audio ampliers or

other mixer inputs

DANTE PRI:

To primary

DANTE™ network

POWER:

From

ac power outlet

LAN:

10/100/1000BASE-T

Ethernet to LAN

DANTE SEC:

To secondary DANTE network

Ground

DSP-1282

MIC/LINE INPUTS:

From microphone or

other audio sources

LINE OUTPUTS:

To audio ampliers or

other mixer inputs

LAN:

10/100/1000BASE-T

Ethernet to LAN

VOIP:

To VOIP network

USB:

To Crestron RL® system or third-party

USB host device

POWER:

From

ac power outlet

PHONE:

To phone line

Ground

USB:

To Crestron RL system or third-

party USB host device

DANTE PRI:

To primary

DANTE network

DANTE SEC:

To secondary

DANTE network

MIC/LINE INPUTS:

From microphone or

other audio sources

LINE OUTPUTS:

To audio ampliers or

other mixer inputs

LAN:

10/100/1000BASE-T

Ethernet to LAN

VOIP:

To VOIP network

PHONE:

To phone line

POWER:

From

ac power outlet

DSP-1283

Ground

COMPUTER:

Direct computer connection to device

DSP-1281 and DSP-1283

Unbalanced Input Wiring

Signal

Jumper

Ground Signal Shield

Unbalanced Output Wiring

Specyfikacje produktu

Marka:	Crestron
Kategoria:	nieskategoryzowany
Model:	DSP-1282
Kolor produktu:	Black, Grey
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	44 mm
Szerokość produktu:	439 mm
Głębokość produktu:	365 mm
Waga produktu:	4100 g
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Zakres temperatur (eksploatacja):	5 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Pobór mocy:	30 W
Diody LED:	Tak
Lokalizacja zasilania:	Tylne
Maks. rozdzielczość:	- px
Rodzaj interfejsu sieci Ethernet:	Gigabit Ethernet
Wyście mocy ac:	Tak
Możliwości montowania w stelażu:	Tak
Przycisk reset:	Tak
Emisja ciepła:	102 BTU/h
Pojemność stelaża:	1U
Ilość portów RJ-45:	2