Instrukcja obsługi Crestron GLXX-CTRL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron GLXX-CTRL (2 stron) w kategorii kabel do komputerów i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 35 osób i została oceniona przez 6 użytkowników na średnio 4.3 gwiazdek

GLXX-CTRL

Cresnet® Control Module

The GLXX-CTRL is a Crestron® Green Light Express® control

module which controls GLXX-SW8GLXX-SW8GLXX-SW8GLXX-SW8, GLXX-SW16GLXX-SW16GLXX-SW16GLXX-SW16, GLXX-HDSW8GLXX-HDSW8GLXX-HDSW8GLXX-HDSW8,

and GLXX-HDSW16GLXX-HDSW16GLXX-HDSW16GLXX-HDSW16 relay modules. The module is part of a

complete Crestron engineered GLPX Green Light Express panel.

For more information on Crestron Green Light commercial

lighting products, please contact Crestron Sales SupportSales SupportSales SupportSales Support

Services.

SPECIFICATIONSSPECIFICATIONSSPECIFICATIONSSPECIFICATIONS

ConnectorsConnectorsConnectorsConnectors

NET: (2) 4-pin 3.5mm detachable terminal blocks; Cresnet®

port

Communication: (1) 16 pin IDC header, connects to adjacent

GLXX module; provides power and control to attached modules

OVR: (2) 2-pin 3.5mm detachable terminal blocks,

paralleled, comprising (2) inputs for external contact

closures to engage override mode

Controls & IndicatorsControls & IndicatorsControls & IndicatorsControls & Indicators

PWR: (1) Green LED; indicates Cresnet power is applied to

NET port

NET: (1) Yellow LED; indicates communication with control

processor

RESET: (1) Recessed miniature pushbutton, resets internal

processor

NET ID: (2) 7-Segment green LED digits and (2) miniature

pushbuttons for setting Cresnet ID; also used to identify

relay when in Local Control mode

SETUP: (1) Red LED and (1) recessed miniature pushbutton

for enabling setup mode and touch-settable ID

OVR: (1) Red LED and (1) miniature pushbutton for enabling

override mode and saving override presets

Local Control Section

ENABLE: (1) Red LED and (1) miniature pushbutton for

activating local mode

UP/DN: (2) miniature pushbuttons for selecting relay

channel

ON/OFF: (2) miniature pushbuttons for manual channel

activation

Power RequirementsPower RequirementsPower RequirementsPower Requirements

5 Watts at 24 Volts DC (powered via control system)

EnvironmentalEnvironmentalEnvironmentalEnvironmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation: 1 BTU/Hr

DimensionsDimensionsDimensionsDimensions

Height: 3.9 in (99 mm)

Width: 7.87 in (200 mm) including mounting holes

Depth: 1.23 in (31 mm)

www.crestron.com 800.237.2041

Specyfikacje produktu