Instrukcja obsługi Crestron TSW-760-B-S

Crestron kasa fiskalna TSW-760-B-S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron TSW-760-B-S (2 stron) w kategorii kasa fiskalna. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/2

The Crestron® TSW-560, TSW-760, and TSW-1060 are stylish and

versatile wall mount touch screens. The touch screen features

onboard voice recognition, web browsing, Smart Graphics® software

technology, H.264 streaming video, a built-in camera, a Rava® SIP

intercom, and PoE+ (Power over Ethernet+) network power. The touch

screen also provides various built-in applications for room scheduling,

conferencing, and home control.

NOTE: Voice recognition, the built-in camera, and the Rava SIP

intercom are not available on the TSW-560-NC, TSW-760-NC, and

TSW-1060-NC models.

The Crestron TSW-560, TSW-760, and TSW-1060 are functionally

similar. For simplicity within this guide, the term “touch screen” is used

except where noted.

Check the Box

Item Qty

TSW-560, TSW-760, or TSW-1060* 1

Latch, Security (P/N 4525305) 1

TSW-560 Only

Bracket, Preconstruction (P/N 4524592) 1

Bracket, Universal Mounting (P/N 4525127) 1

TSW-760 or TSW-1060 Only

Bracket, Mounting (P/N 4525352) 1

Screw, 6-32 x 3/4 in., Undercut Head, Phillips (P/N 2033247) 4

Screw, M3 x 16 mm, Flat Head, Phillips (P/N 2013788) 4

Screw, M3.5 x 25 mm, Flat Head, Phillips (P/N 2023756) 2

* Refer to the TSW-560-B-S, TSW-760-B-S, and TSW-1060-B-S product page

at for a complete list of color and texture variations.

www.crestron.com

Install the TSW-560 Mounting Bracket

The TSW-560 can be mounted into drywall and other surfaces, or it

can be mounted onto a wall stud. When mounted into drywall and

other surfaces, the touch screen protrudes 1/2 in. (13 mm) from the

mounting surface.

To install the TSW-560 mounting bracket in preconstruction

applications, use standard drywall nails or screws (not included) to

attach the included TSW-UMB-60-PMK preconstruction mounting

bracket to a wall stud.

TSW-UMB-60-PMK

Use a tie wrap to hold the

cable until the TSW-560 is

mounted.

NOTE: Allow an air gap of at least 12 in. (305 mm) in the wall cavity

above and below the TSW-560 for heat dissipation.

To install the TSW-560 mounting bracket in postconstruction

applications:

1. Use the TSW-UMB-60-PMK as a cutout template by turning

the bracket to face the wall, ensuring it is level, and temporarily

tacking it to the wall with finishing nails (not included) through

the smaller holes around the cutout opening.

2. Trace the cutout opening with an appropriate drywall saw.

TSW-UMB-60

3. Loosen the two screws on the included TSW-UMB-60 universal

mounting bracket.

4. Install the TSW-UMB-60, bottom side first, into the opening.

Push the top surface

downward to install

the bottom half first.

TSW-UMB-60

(side view)

Loosen both

of the screws.

5. Push the rear half of the mounting bracket back so that it is

seated behind the mounting surface completely.

6. Ensure the front of the TSW-UMB-60 is level, and then tighten

the two bracket screws to complete the installation.

CAUTION: To avoid damaging the bracket, do not overtighten

the screws.

Push the rear half back.

Ensure the front is level, and

then tighten both screws.

Install the TSW-760/TSW-1060 Mounting

Bracket

The TSW-760 and TSW-1060 install over a standard 2-gang or 3-gang

U.S. electrical box, a 2-gang European electrical box, or a 2-gang U.K.

electrical box. The touch screen may also be installed into wooden

paneling or furniture with a 2-1/5 in. (56 mm) high by 3-3/4 in. (96 mm)

wide rectangular cutout. When installed, the touch screen protrudes

1/2 in. (13 mm) from the mounting surface, leaving no visible screws.

NOTES:

• Additional mounting options are possible by using the

TSW-UMB-60 universal mounting bracket, the

TSW-UMB-60-PMK preconstruction mounting kit, the

TSW-UMB-60-BBI back box, or the TSW-760/1060-MSMK

multisurface mount kit. For more information, refer to the

product pages on the Crestron website.

• Installing the mounting bracket to an electrical box is required

only if one of the mounting solutions above is not used. For more

information, refer to the mounting solution documentation at

www.crestron.com/manuals.

To mount the touch screen into an electrical box, use the appropriate

screws (four 6-32 x 3/4 in. screws, four M3 x 16 mm screws, or two

M3.5 x 25 mm screws) to attach the mounting bracket to the electrical

box as shown in the following illustrations.

NOTE: For U.S.-style installations, use a #2 Phillips screwdriver. For

European or U.K.-style installations, use a #1 Phillips screwdriver or its

equivalent.

• For U.S.-style installations, use the four 6-32 x 3/4 in. screws.

Mounting

bracket

Screws (4):

6-32 x 3/4 in.

2-gang U.S.

electrical box

• For European-style installations, use the four M3 x 16 mm

screws.

Mounting

bracket

Screws (4):

M3 x 16 mm

2-gang European

electrical box

• For U.K.-style installations (not pictured), use the two M3.5 x 25

mm screws to attach the mounting bracket to the electrical box.

Insert the screws through the center openings in the left and

right sides of the mounting bracket.

Install the Security Latch (Optional)

The included security latch may be attached to the touch screen so

that it cannot be easily removed from the mounting bracket after

installation.

To install the security latch, use a small Phillips screwdriver to screw

the security latch to the top of the touch screen rear housing before

the touch screen is inserted into the mounting bracket.

Touch

screen

Security

latch

Connect the Touch Screen

Route all necessary cables through the rear of the electrical box, and

then make connections to the touch screen as shown in the illustration

below.

LAN PoE:

10BASE-T / 100BASE-TX

Ethernet to LAN

USB:

To LED accessories

Reset button

Observe the following when connecting the touch screen:

• Use Crestron power supplies for Crestron equipment.

• Power and data connection is provided to the touch screen by

a single Ethernet cable. A Crestron PoE (Power over Ethernet)

power supply, such as the PWE-4803RU, or a PoE-capable

network switch is recommended (both not included).

• The USB port is used to connect compatible Crestron LED

accessories to the touch screen.

NOTE: The TSW-760 may use either PoE or PoE+ to supply power

to compatible LED accessories over USB; the TSW-1060 must

use only PoE+ to supply power to LED accessories over USB.

• Apply power after all connections have been made.

Install the Touch Screen

Once all connections have been made, push the touch screen gently

into the mounting bracket so that the touch screen rear housing is

secured within the center opening in the mounting bracket.

Touch screen

Mounting

bracket

If the touch screen is not level after installation, pull it out of the

mounting bracket and loosen the screws holding the bracket into place.

This procedure allows the mounting bracket to be rotated slightly.

Once the mounting bracket has been repositioned, retighten the

screws, reinstall the touch screen into the bracket, and ensure that the

touch screen is now level.

TSW-560/TSW-760/TSW-1060

5 in., 7 in., and 10.1 in. Touch Screens

Specyfikacje produktu

Marka:	Crestron
Kategoria:	kasa fiskalna
Model:	TSW-760-B-S
Kolor produktu:	Czarny
Typ wyświetlacza:	TFT
Wysokość produktu:	122 mm
Szerokość produktu:	194 mm
Głębokość produktu:	39 mm
Waga produktu:	400 g
Wbudowane głośniki:	Tak
Długość przekątnej ekranu:	7 "
Pojemność pamięci wewnętrznej:	2000 MB
Prędkość transferu danych przez Ethernet LAN:	10, 100 Mbit/s
Zakres temperatur (eksploatacja):	0 - 45 °C
Zakres wilgotności względnej:	10 - 90 %
Rozdzielczość:	1024 x 600 px
Obsługiwane formaty audio:	MP3
Przewodowa sieć LAN:	Tak
Jasność:	350 cd/m²
Format obrazu:	17:10
Głębia kolorów:	24 bit
Technologia touchscreen:	Pojemnościowa
Współczynnik kontrastu:	1100:1