Instrukcja obsługi D-Link DIS-M100G-SW
D-Link
Konwerter audio/wideo
DIS-M100G-SW
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla D-Link DIS-M100G-SW (2 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 5.0 gwiazdek
Strona 1/2
DIS-M100G-SW
Industrial Gigabit Ethernet to Fiber
Media Converter
Q
uick Installation Guide
Features
Supports1port 100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to SFP port signal conversion
Provided DIP-Switch to set operation speed of SFP port
High reliability and rigid IP-30 housing
DIN-Rail and wall-mount enabled
DIS-M100G-SW
DIS-M100G-SW
DIS-M100G-SW
-
/1000 ( ) 100/1000 - ,
'
.,
DIS-M100G-SW isacost effective solution for the conversion between
100 Base-T X and Base X interface it allows you to extend
communication distance by optical fiber. supports MDI/MDIX auto
detection, so you don t need to use crossover wires. with wide
operating temperature range from -40 70 and accepts a wide voltage range from
dual 12~48 VDC power inputs so it is suitable for harsh operating environments
Therefore, the is reliable media converter and can satisfy most
demand of operating environment.
～ ℃
Introduction
Specifications
Model
100/1000 Base-T(X) Port in RJ45
Auto MDI/MDIX
Physical Ports
Technology
Ethernet standards
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3 ab for 1000Base-T
IEEE 802.3zfor 1000Base-X
LED Indicators
Green: Power LEDx2. (ON) power input on-line / (OFF) power input off-line
Power indicator
Green for fiber port Link/Act - (ON) Link up/(Flash) Acting/(OFF) Link down
100/1000Base-F(X) fiber port
indicator
Power
Input power
Power consumption(Typ.)
Dual 12~48 VDC power input at 4 pin terminal block
3.6 Watts
Overload current protection
Reverse polarity protection
Present
Present
Physical Characteristic
Enclosure
IP-30
Dimension (WxDxH)
26.1 (W)x70 (D)x95 (H)mm (1.03x2.76x3.74 inch)
Weight (g)
190 g (0.42 lb)
Environmental
-40 to 85 C (-40 to 185 F)
oo
Storage Temperature
Operating Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-6
IEC60068-2-32
Vibration
EN60950-1
Safety
Free Fall
Warranty
5 years
-40 to 70 C (-40 to 158 F)
oo
Connections of Media converter
DIS-M100G-SW
1
LED for Link/Act and Speed indicator :
Green on only : 1000Mbps Link/Act-(ON) Link up/(Flash) Acting /
(OFF) Link down
Green and Amber on : 100Mbps Link/Act-(ON) Link up / (Flash) Acting /
(OFF) Link down
*Note: If amber on only:Link up at 10Mbps is not a valid mode
100/1000Base-T(X) RJ45 port
indicator
DIP-Switch 1/2
DIP-Switch 1 (ON) and DIP-Switch 2 (ON):SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF):SFP speed setting to 1000Mbps
Power Connection Guide
FrameGround
V-
V+
Power
Supply
12-48 VDC
PWR2
V2+ V2-
G
PWR1
V1+ V1-
Power
Supply
12-48 VDC
V-
V+
DC 12-48V
100/1000Base-X SFP port
1
Fiber Port LNK/ACT LED
SFP 100/1000Base-FX
Fiber Port
1000Base-T LNK/ACT
LED (Green)
100/1000Base-T(X)
LAN Port
10/100Base-T(X)
LNK/ACT LED (Amber)
DIP Switch for Mode
Select
Power LED
DIP-Switch
DIP Switch Function
SFP speed setting to 100Mbps
Description
ON
OFF
Front Panel
SFP speed setting to 1000Mbps
For long distance transmission
Working Status
Ethernet Port Status
100Mbps
100Mbps
1000Mbps
1000Mbps
SFP Fiber Port Status
100Mbps
100Mbps
1000Mbps
1000Mbps
Working status
Valid
Invalid
Valid
Invalid
Accessory
Dust Cover (RJ-45)
2
QIG
8
Screw (M3 X3)
4
Wall-mounted kit
5
25mm DIN-Rail kit
6
4-Pin Terminal block
1
yrosseccAnoitpircseDledoMemanledoM
Packing list
Communication Connections
RJ45 (8-pin) to RJ45 (8-Pin) Straight-Through Cable Wiring
RJ45 Plug Pin1
Straight-Through Cable
Switch Port
RJ-45
Connector
Tx+
Tx-
Rx+
Rx-
3
6
1
2
NIC Port
RJ-45
Connector
Rx+
Rx-
Tx+
Tx-
3
6
1
2
RJ45 (8-pin) to RJ45 (8-Pin) Cross-Over Cable Wiring
RJ45 Plug Pin1
Cross-Over Cable
Switch Port
(NIC Port)
RJ-45
Connector
Tx+
Tx-
Rx+
Rx-
3
6
1
2
RJ-45
Connector
Rx+
Rx-
Tx+
Tx-
1
2
3
6
Switch Port
(NIC Port)
(Rx+)
(Rx-)
(Tx+)
(Tx-)
(Tx+)
(Tx-)
(Rx+)
(Rx-)
100Base-TX Ethernet Port Connection
RJ45 (8-pin, MDI) Port Pinouts
1 8
Pin Single
1
2
3
6
Tx+
Tx-
Rx+
Rx-
RJ45 (8-pin, MDI-X) Port Pinouts
1 8
Pin Single
1
2
3
6
Rx+
Rx-
Tx+
Tx-
Pin
Power Cable with power jack
7
Quick Installation Guide
1
X 1,
2
X 1,
3
X 1,
X 1,
X 8,
DIS-M100G-SW
Gigabit Industrial Unmanaged Media Converter
with 1x100/1000Base-T(X) and 1x100/1000Base-X,
SFP socket
6
4
5
X 2,
7
X 1,
Dust Cover (SFP)
3
X 1
8
LC-Port Pinouts
Tx
Rx
LC-Port to LC-Port Cable Wiring
Rx
Tx
Cable Wiring
xRxT
LC-Port Pinouts
100/1000Base-X SFP Port Connection
Rx
Tx
Q I G
Installation
Din-Rail Install Step Wall-mounted Install Step
1000Base-T Ethernet Connection
RJ45 (8-pin, MDI) Port Pinouts
1 8
Pin MDI
1
2
3
4
5
6
7
8
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
RJ45 (8-pin, MDI-X) Port Pinouts
1 8
X-IDMniPniP
1
2
3
4
5
6
7
8
BI_DB+
BI_DB-
BI_DA+
BI_DD+
BI_DD-
BI_DA-
BI_DC+
BI_DC-
Pin
DIS-M100G-SW
Industrial Gigabit Ethernet to Fiber
Media Converter
Q
uick Installation Guide
Additional Information
Regulatory Statements
SAFETY INSTRUCTIONS
Quick Installation Guide
Q I G
You can refer to the user manual or visit http://support.dlink.com/ for more
support.
Online Support
If there are any issues that are not in the user manual, please visit http://sup-
port.dlink.com/ which will direct you to your appropriate local D-Link support
website.
Warranty Information
Visit http://warranty.dlink.com/ to view the D-Link Warranty information.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Non-modifcation Statement
Any changes or modifcations not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
onditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Industry Canada Statement:
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe A est conforme à la norme NMB-003 du Canada.
Japan Voluntary Control Council for Interference Statement
この装置は、クラス A 情報技術装置です。 この装置を家庭環境で使用すると電波妨害を引き起こすこと
があります。 この場合には使用者が適切な対策を講ずるよう要求されることがあります。
VCCI-A
Japan Voluntary Control Council for Interference Statement
This is a Class A product based on the standard of the Voluntary Control Council for Interference
(VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which
case the user may be required to take corrective actions.
警告使用者:
此為甲類的資訊技術設備，在居住環境中使用時，可能會造成射頻擾動，在這種情況下，使用者會被要求採
取某些適當的對策。
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
CE EMI Class A Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment
may cause radio interference.
The following general safety guidelines are provided to help ensure your own
personal safety and protect your product from potential damage. Remember to
consult the product user instructions for more details.
Static electricity can be harmful to electronic components. Discharge static
electricity from your body (i.e. touching grounded bare metal) before touching the
product.
Do not attempt to service the product and never disassemble the product. For
some products with user replaceable battery, please read and follow the
instructions in the user manual.
Do not spill food or liquid on your product and never push any objects into the
openings of your product.
Do not use this product near water, areas with high humidity or condensation
unless the product is specifcally rated for outdoor application.
Keep the product away from radiators and other heat sources.
Always unplug the product from mains power before cleaning and use a dry lint
free cloth only
2019/08/20 ver.1.00(WW)_126X130 1907-2-29-IGMC111GPB
Specyfikacje produktu
| Marka: | D-Link |
| Kategoria: | Konwerter audio/wideo |
| Model: | DIS-M100G-SW |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z D-Link DIS-M100G-SW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Konwerter audio/wideo D-Link
13 Stycznia 2025
9 Stycznia 2025
7 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
24 Grudnia 2024
5 Września 2024
20 Sierpnia 2024
8 Sierpnia 2024
Instrukcje Konwerter audio/wideo
- JL Audio
- AJA
- Kramer
- Aluratek
- CE Labs
- Data-Tronix
- ATen
- Bose
- Metra
- Monoprice
- Renkforce
- Kathrein
- Decimator
- Eminent
- FSR
Najnowsze instrukcje dla Konwerter audio/wideo
7 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
28 Marca 2025
26 Marca 2025