Instrukcja obsługi Da-Lite Touch Interactive 29590

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Da-Lite Touch Interactive 29590 (2 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 9 użytkowników na średnio 4.5 gwiazdek

INSTRUCTIONS FOR

Touch Interactive Bracket Kits (Small and Large)

Tools Required for InstallationInstallation

1. Using the provided #4 x ½” screws and #4 nuts, attach the

touch module base plate to the bracket.

NOTE:Some touch modules will attach to the bracket with

magnets. If the touch module allows attachment using

hardware or magnets, hardware attachment is

recommended.

2. Remove the cover from the touch module. Using the screws

provided with the projection system, attach the touch

module to the touch module base plate.

3. Position the bracket with touch module along the top of the

IDEA Screen or IDEA Panoramic according to the projector

manufacturer’s instructions. Using the two provided #8 x ½”

screws, attach the bracket and touch module to the IDEA

frame with the touch module facing towards the audience.

NOTE:If the projector instructions do not specify a position,

center the bracket relative to the projected image. The lat

vertical surface of the touch interactive bracket should be

lush to the face of the IDEA frame.

4. Follow manufacturer’s instructions for aligning the IR curtain.

Required Hardware - Provided

Figure 1

Small Bracket Installation

Phillips Screwdriver

(2) #8 x ½” Screws(2) #4 x ½” Screws(2) #4 Nuts

NOTE:Interactive module terminology may vary from manufacturer to manufacturer.

#8 x ½" Screws

#4 x 1/2”

Screws

#4 Nuts

Screws Supplied with

Touch Module

Touch Module

Base Plate

Touch Module

1/4” Wrench

Specyfikacje produktu