Instrukcja obsługi Datalogic 94A151115
Datalogic
Ładowarka do urządzenia mobilnego
94A151115
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Datalogic 94A151115 (2 stron) w kategorii Ładowarka do urządzenia mobilnego. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
Datalogic Kyman™ Ethernet Multi Cradle
The Datalogic Kyman™ Ethernet Multi Cradle provides power for
charging up to four mobile computers simultaneously and also connects
up to four mobile computers to an Ethernet network.
Figure 1 – Datalogic Kyman™ Ethernet Multi Cradle General View
Key:
A) Link LED for Ethernet Port 1
B) Speed LED for Ethernet Port 1
C) Datalogic Kyman™ Charging Status LED
D) Power supply connector
E) Ethernet Port 1 (with integrated Link and Speed LEDs)
F) Ethernet Port 2 (with integrated Link and Speed LEDs)
822000790
The Ethernet cradle drivers are pre-installed on the Datalogic Kyman™
and initiate automatically when the Datalogic Kyman™ is placed in a
properly connected Four Slot Ethernet cradle.
When the mobile computer is inserted into the Four Slot Ethernet cradle,
the LAN icon indicates that the mobile computer is connected to a
network.
The green Speed LED lights to indicate that the transfer rate is 100 Mbps.
When it is not lit it indicates that the transfer rate is 10Mbps.
NOTE
The maximum bandwidth capacity for each Mobile
Computer is 12Mbps.
The yellow Link LED blinks to indicate activity, or stays lit to indicate that
a link is established. When it is not lit it indicates that there is no link.
The Speed LED and the Link LED integrated in Ethernet Port 1 and 2
function in the same way.
The Charging Status LED on the mobile computer shows the status of the
battery charging. The maximum time required to recharge a completely
run-down battery pack is about 3 hours for Li-Ion batteries. See Datalogic
Kyman™ User’s Manual for Charging Status LED indications.
Correct Mobile Computer Insertion / Removal
Insert the mobile computer into a slot to begin charging and start
communication.
For correct insertion onto the cradle, insert the mobile computer from the
top of the cradle and push it down firmly.
Figure 2 - Mobile Computer Insertion
To remove the mobile computer from the Datalogic Kyman™ Ethernet
Multi Cradle, simply pull it upwards while holding the cradle firmly down.
TECHNICAL FEATURES
Electrical Features
Power supply from 12 to 14 VDC ± 5%
Consumption Max 7 A
Indicators Ethernet Link LED (yellow)
Ethernet Speed LED (green)
Charge time (when PDA is off) max 3 hours (Li ION batteries)
Communication Features
Interface Ethernet 10/100 Base T
Environmental Features
Working temperature 0° to +50°C / 32° to 140°F *
Storage temperature -20° to +70°C / -4° to 158°F
Humidity 90% non condensing
Degree of protection IP20
Mechanical Features
Dimensions 480 x 137 x 190 mm
18.89 x 5.4 x 7.48 in
Weight about 2940 g / 104 oz
* Batteries must be charged at a temperature ranging from 0° to 45 °C
(+32° to 113°F).
F
E
D
B
A
C
Specyfikacje produktu
| Marka: | Datalogic |
| Kategoria: | Ładowarka do urządzenia mobilnego |
| Model: | 94A151115 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Datalogic 94A151115, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ładowarka do urządzenia mobilnego Datalogic
3 Września 2024
29 Sierpnia 2024
4 Lipca 2024
Instrukcje Ładowarka do urządzenia mobilnego
- Urban Revolt
- RCA
- Act
- Panasonic
- Cooler Master
- Natec
- Konig
- Denver
- WAGAN
- XD-Design
- Audiovox
- Duracell
- Thermaltake
- Gembird
- Makita
Najnowsze instrukcje dla Ładowarka do urządzenia mobilnego
3 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
29 Marca 2025
28 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
11 Marca 2025