Instrukcja obsługi Dimplex SBN20E

Dimplex grzejnik SBN20E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dimplex SBN20E (2 stron) w kategorii grzejnik. Ta instrukcja była pomocna dla 28 osób i została oceniona przez 14.5 użytkowników na średnio 4.0 gwiazdek

Pobierz PDF

Strona 1/2

Brayford Model: BFD20

547

440

Springborne Model: SBN20

controls

295

547

440

controls

295

Important Safety Advice:

When using electrical appliances, basic precautions

should be followed to reduce the risk of fire, electric

shock, and injury to persons, including the following :

• If the appliance is damaged, check immediately

with the supplier before installation and operation.

• Do not use this heater in the immediate

surroundings of a bath, shower or swimming pool.

• Do not use outdoors.

• This heater must not be located immediately below

a fixed socket outlet or connection box.

• Do not cover or obstruct in any way the heat outlet

grille located at the bottom of the heater.

Overheating will result if the heater is accidentally

covered.

• Ensure that furniture, curtains or other

combustible materials are positioned no closer

than 1 metre from the heater.

• In the event of a fault unplug the heater.

• Unplug the heater when not required for long

periods.

• Keep supply cord away from the front of the

heater.

• Although this heater complies with safety

standards, we do not recommend its use on deep

pile carpets or on long hair type of rugs.

• This appliance is not intended for use by children

or other persons without assistance or

supervision if their physical, sensory or mental

capabilities prevent them from using it safely.

Children should be supervised to ensure that they

do not play with the appliance.

• The appliance must be positioned so that the plug

is accessible.

• If the supply cord is damaged it must be replaced

by the manufacturer or service agent or similarly

qualified person in order to avoid a hazard.

IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Fig. 1

General General

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your

supplier.

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your

supplier.

This model is designed to be free standing and is normally

positioned against a wall.

This model is designed to be free standing and is normally

positioned against a wall.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

On the Springborne model loose coals are packed separately within

the carton. When the heater is assembled the coals can be placed

on top of the fuel bed, as required.

On the Springborne model loose coals are packed separately within

the carton. When the heater is assembled the coals can be placed

on top of the fuel bed, as required.

Please note: Used in an environment where background noise

is very low, it may be possible to hear a sound which is related

to the operation of the flame effect. This is normal and should

not be a cause for concern.

Electrical Electrical

WARNING: THIS APPLIANCE MUST BE EARTHED. WARNING: THIS APPLIANCE MUST BE EARTHED.

This fire is suitable for operation on an AC~ electricity supply having

the same voltage as that shown on its rating label.

This fire is suitable for operation on an AC~ electricity supply having

the same voltage as that shown on its rating label.

In the event of replacing the fuse supplied, a 13 amp fuse approved

by ASTA to BS 1362 must be used.

In the event of replacing the fuse supplied, a 13 amp fuse approved

by ASTA to BS 1362 must be used.

If the socket outlets in your home are not of the 13 amp BS1363

type they will not accept the plug connected to this heater, therefore

cut off the plug. When cut off this plug can constitute a shock

hazard if inserted into a socket outlet. It must therefore be disposed

of safely.

If the socket outlets in your home are not of the 13 amp BS1363

type they will not accept the plug connected to this heater, therefore

cut off the plug. When cut off this plug can constitute a shock

hazard if inserted into a socket outlet. It must therefore be disposed

of safely.

Before wiring the appropriate plug please note that the wires in this

mains lead are coloured in accordance with the following code.

Before wiring the appropriate plug please note that the wires in this

mains lead are coloured in accordance with the following code.

GREEN/YELLOW - EARTH GREEN/YELLOW - EARTH

BLUE - NEUTRAL BLUE - NEUTRAL

BROWN - LIVE BROWN - LIVE

Connect the Green/Yellow wire to the terminal marked ‘E’ or the earth symbol or

coloured Green or Green/Yellow.

Connect the Green/Yellow wire to the terminal marked ‘E’ or the earth symbol or

coloured Green or Green/Yellow.

Connect the Brown wire to the terminal marked ‘L’ or coloured Red. Connect the Brown wire to the terminal marked ‘L’ or coloured Red.

Connect the Blue wire to the terminal marked ‘N’ or coloured Black. Connect the Blue wire to the terminal marked ‘N’ or coloured Black.

DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the

Earth terminal of your 13 amp plug. If the terminals of the plug are

unmarked or you are in any doubt, consult a qualified electrician.

DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the

Earth terminal of your 13 amp plug. If the terminals of the plug are

unmarked or you are in any doubt, consult a qualified electrician.

CAUTION: If you use this heater in conjunction with a thermal

control, programme controller, timer or any other device which

switches the heater on automatically observe all safety warnings at

all times

CAUTION: If you use this heater in conjunction with a thermal

control, programme controller, timer or any other device which

switches the heater on automatically observe all safety warnings at

all times

Installation and Operating Instructions

Brayford Log Stove Model: BFD20 08/18740/3 Issue 3

Springborne Coal Stove Model: SBN20

Please note: Used in an environment where background noise

is very low, it may be possible to hear a sound which is related

to the operation of the flame effect. This is normal and should

not be a cause for concern.

Specyfikacje produktu

Marka:	Dimplex
Kategoria:	grzejnik
Model:	SBN20E
Kolor produktu:	Czarny
Regulowany termostat:	Tak
Typ kontroli:	Bezprzewodowy
Długość przewodu:	1.7 m
Wysokość produktu:	545 mm
Szerokość produktu:	440 mm
Głębokość produktu:	310 mm
Waga produktu:	14000 g
W zestawie pilot zdalnego sterowania:	Tak
Szerokość opakowania:	500 mm
Wysokość opakowania:	610 mm
Głębokość opakowania:	370 mm
Certyfikaty:	CE, BEAB
Model:	Wentylator elektryczny ogrzewacza pomieszczeń
Moc grzewcza:	2000 W
Opcje rozmieszczania:	Podłoga
Liczba poziomów zasilania:	2
Odpowiedni dla:	Wewnętrzna