Instrukcja obsługi Doepfer A-117


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Doepfer A-117 (8 stron) w kategorii Nie sklasyfikowane. Ta instrukcja była pomocna dla 33 osób i została oceniona przez 17 użytkowników na średnio 4.9 gwiazdek

Strona 1/8
doepfer System A - 100 Digital Noise Generator A-117
1
1. Introduction
Module A-117 (DNG) is a combination module, inclu-
ding a digital noise generator and an 808 source.
The digital noise generator uses random sequences of
square waves, (18-band, with multiple slewed feed-
back loops), whose rate can go from random clicks to
pure noise. The colour of the noise is very different
from the analog noise produced by the A-118.
In addition to a manual setting, the rate can be control-
led by an external clock - eg. VCO, LFO or MIDI clock).
The 808 Source aims to re-create the sort of multi-
oscillator array that was used in Roland’s TR-808
and 606 drum machines as the basis of the sound of
the hi-hat, cymbals and cowbell. The cowbell mix
uses two oscillators, and the cymbals mix six.
Rate
Noise/
Clock Out
A-117
DNG / 808
Ext.
Clock In
Mix 2
Mix 6
A-117 Digital Noise Generator System A - 100 doepfer
2
2. DNG / 808 - Overview Controls:
1 Rate : Pulse rate control for random clock /
noise output !
In / Outputs:
! DNG / RND CLK : Output for random clock / digital
noise
" EXT. CLK : Input for external clock signal
§ 6 Osc. : Output for 808 source (6 oscillators)
$ 2 Osc. : Output for 808 source (2 oscillators)
DNG
Rate
DNG /
RND CLK
DIG. NOISE/ 808 Source
0 10
6 Oscillators
EXT. CLK
2 Oscillators
808 Sound Source
doepfer System A - 100 Digital Noise Generator A-117
3
3. Controls
1 Rate
This is used to adjust the pulse rate of the random
clocks generated. At low pulse rates, individual pulses
can be heard (see Fig.1, top), but with higher pulse
rates (see Fig.1, bottom) the sound merges into noise.
Fig. 1: A-117 output signals at different pulse rates
4. In / Outputs
! DNG / RND CLK
Output !
!!
! produces random clock pulses or digital
noise, depending on the pulse rate set.
" EXT. CLK
Input " is a normalled socket, so that the rate knob
controls pulse rate, unless a signal is patched into this
socket.
This external clock can be provided eg., by a square
wave from a VCO or LFO, or from a MIDI clock, etc.. In
this case, control 1 has no effect. Pulse rate is then
simply decided by the frequency of the external clock.
§ 6 Oscillators
Output § delivers a six-oscillator mix, like the raw
material of the TR-808’s cymbal sound.
$ 2 Oscillators
Output $ delivers a two-oscillator mix, like the raw
material of the cowbell sound on the Roland TR-808.
DNG/
Clock
Out
DNG/
Clock
Out


Specyfikacje produktu

Marka: Doepfer
Kategoria: Nie sklasyfikowane
Model: A-117

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Doepfer A-117, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie sklasyfikowane Doepfer

Doepfer

Doepfer A-117 Instrukcja

16 Września 2024

Instrukcje Nie sklasyfikowane

Najnowsze instrukcje dla Nie sklasyfikowane

LG

LG WD-1485RD Instrukcja

22 Września 2024
ATen

ATen VS1808T 8 Instrukcja

20 Września 2024
Lifan

Lifan LF-160F-2 Instrukcja

20 Września 2024
Martin

Martin Mach CW215 Instrukcja

19 Września 2024
Microchip

Microchip MCP2551 Instrukcja

17 Września 2024
Urbanista

Urbanista Milan Instrukcja

16 Września 2024
Shimano

Shimano HB-RM33 Instrukcja

15 Września 2024