Instrukcja obsługi Dormakaba HSB-E10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dormakaba HSB-E10 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.9 gwiazdek

Subject to change without notice

Standard unitsHSB-E10

Note:Description of single unit

Interlock height40-3⁄16" (1020)

Interlock length 57-7/8" (1470)

Passage width 25-9⁄16" (650)

Total width 41-5⁄16" (1050)

Housing, base columns,

guiding elements

AISI 304 stainless steel with satin finish.

ADA compliance36" (915) width available.

Barrier elements Two door leaves made of transparent polycarbonate; upper edge

35-7⁄16" (900).

Swinging area monitored by separation sensors.

SecurityPassage area monitored by simple sensor system with our

shortest installation length (simple level of single passage

monitoring in both directions).

FinishStainless steel semi-gloss smooth finish.

SafetyLow energy drive with energy content less than 1.18 lb/ft.

FunctionType 2—power assisted motion; two servo-positioning drives/

electrically controlled in both directions.

DrivesIntegrated in the swing tube.

Operating modesOptical.

Normally closed.

Normally opened. (Barriers close on tailgate event.)

Electrical equipmentControl system and power supply integrated in the unit.

Power supply110 – 230 VAC, 50/60 Hz. 368 VA

Standby power consumption17 VA

Standard adjustment in case

of power failure

Door leaves move freely.

InstallationDowelled on finished floor level, FFL.

Not suitable for outdoor installation.

Protection classesHousing IP43, components conducting supply voltage IP43.

41-5/16"

(1050)

7-7/8"

(200)

7-7/8"

(200)

57 -7/8"

(1470)

35-7/16"

(900)

40-3/16"

(1020)

25-9/16"

(650)

HSB-E10

HSB-E10 sensor barriers

Economical

Economical units offer a minimal

installation length and a simple

sensor system monitors the

passage area by offering single

passage in both directions.

Entrance systems

Specyfikacje produktu