Instrukcja obsługi Edifier CC200


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Edifier CC200 (29 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.4 gwiazdek

Strona 1/29
CC200
Wireless Mono Headset
Man lua
Power ON: Press and hold the " " button for 3s when power OFF. Green
LED will be lit for 1s.
Power OFF: Press and hold the " " button for 3s when power ON. Red LED
will be lit for 1s.
Power ON/OFF
EN
Pairing for the rst time
1. Press and hold the " " button for 3s when power off. Red and Green LED
will blink alternately and rapidly.
2. Select "EDIFIER CC200" in your device setting to connect. Green LED will
blink twice rapidly then off after connected.
Note: For subsequent use, the headset will auto-connect to device used last
time.
Pairing for new device
1. Press and hold the " " button for 5s when power off. Red and Green LED
will blink alternately and rapidly.
2. Select "EDIFIER CC200" in your device setting to connect. Green LED will
blink twice rapidly then off after connected.
Pairing
3s
Indicator
3s
Indicator
1. Power on and disconnected to any Bluetooth devices.
2. Simultaneously press and hold the "+" "-" buttons for 5s to reset and start
Bluetooth pairing.
3. Green LED will blink 6 times rapidly when successful.
Reset
5s
Indicator
The B call rings when accepting the A call:
1. Press the " " button to accept the B call and remain the A call.
2. Press 2 times the " " button to accept the B call and end the A call.
3. Press and hold the " " button for 2s to reject the B call.
4. When accepting the B call and remaining the A call, press 2 times the " "
button to switch between the A and B calls.
2s
x1
x2
Multiple calls
A
B


Specyfikacje produktu

Marka: Edifier
Kategoria: Słuchawki
Model: CC200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Edifier CC200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą