Instrukcja obsługi Edifier X2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Edifier X2 (29 stron) w kategorii słuchawka. Ta instrukcja była pomocna dla 41 osób i została oceniona przez 21 użytkowników na średnio 5.0 gwiazdek

Strona 1/29
T r erue Wi eless E a r b uds H adp hon es
Manual
Pairing
1. Taken out of the case. Red and Blue LED will blink rapidly.
2. Select "EDIFIER X2" in your device setting to connect.
Note:
For subsequent use, the earbuds will auto-connect to device used last time.
IndicatorIndicator
EN
Power ON/OFF
1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
Reset
1. Taken out of the case.
2. Disconnected to any Bluetooth devices. Press and hold the touch panel on either earbud for around 8s
and wait until Blue LED blinks rapidly to reset and turn off. If the left and right earbuds are connected,
the other side will reset and turn off either)
3. Placed in the case and taken out of the case again.
4. Select "EDIFIER X2" in your device setting to connect.
Blue LED lit for 1s
8s 8s
IndicatorIndicator
Charge
Left & Right connection (Connect to another X2 earbuds)
x5 x5
IndicatorIndicator
x2 x2
IndicatorIndicator
1. Earbuds must disconnect to any devices. Respectively tap 5 times the touch panel on both earbuds to
cancel Left & Right connection. Blue LED will be steady lit. Upon connection is canceled, place the
earbuds back in the case.
2. Taken out of the case and disconnected to any devices. Respectively tap 2 times the touch panel on both
earbuds to start Left & Right connecting. Blue LED will blink rapidly.
3. Upon connection is successful select "EDIFIER X2" in your device setting to connect.
Earbuds
1. When hearing low battery prompt tone, please place the earbuds in the
case for charging.
2. Red LED is steady lit when charging and off when fully charged.
Charging case
1. Please connect the case to power source with the included Type-C
charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.
Red LED Input: 5V 200mA(Earbuds)
5V 1A(Charging case)


Specyfikacje produktu

Marka: Edifier
Kategoria: słuchawka
Model: X2
Kolor produktu: Czarny
Typ produktu: Zestaw słuchawkowy
Styl noszenia: Douszny
Rekomendowane użycie: Połączenia/muzyka
Typ zestawu słuchawkowego: Stereofoniczny
Czas odtwarzania muzyki: 7 h
Technologia łączności: Bezprzewodowy
Bluetooth: Tak
Profile Bluetooth: A2DP, AVRCP, HFP
Wersja Bluetooth: 5.1
Budowa słuchawek: Intrafonetyczny
Pasmo przenoszenia: 20 - 20000 Hz
Impedancja: 32 Ω
Czułość słuchawek: 93 dB
Typ mikrofonu: Wbudowany mikrofon
Czułość mikrofonu: -38 dB
Średnica głośnika: 13 mm
Typ ładowania: Przewodowa
Pojemność akumulatora prawej słuchawki: 37 mAh
Pojemność akumulatora lewej słuchawki: 37 mAh
Typ połączenia skrzynki ładującej: USB Type-C
Etui do ładowania: Tak
Czas ciągłego odtwarzania dźwięku (z etui ładującym): 21 h
Pojemność baterii (etui ładujące): 350 mAh

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Edifier X2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą