Instrukcja obsługi Eizo EX3

Eizo Sprzęt pomiarowy EX3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Eizo EX3 (24 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/24

English

Please read this User’s Manual carefully to familiarize yourself with safe and effective usage.

Please retain this manual for future reference.

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes strange noises,

disconnect all connections immediately and contact your dealer for advice.

Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.

Do not disassemble or modify the unit and cable.

Not doing so may result in damage, re or electric shock.

Package Contents

Please contact your local EIZO representative for assistance if any of the listed items are missing

or damaged.

• EX3 (sensor)

• User’s Manual (This manual)

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any

form or by any means, electronic, mechanical, or otherwise, without the prior written permission

of EIZO Corporation. EIZO Corporation is under no obligation to hold any submitted material or

information condential unless prior arrangements are made pursuant to EIZO Corporation’s

receipt of said information. Although every effort has been made to ensure that this manual

provides up-to-date information, please note that EIZO monitor specications are subject to

change without notice.

EIZO, EIZO Logo and ScreenManager are registered trademarks of EIZO Corporation in Japan and other countries.

ColorNavigator is a trademark of EIZO Corporation.

All other company and product names are trademarks or registered trademarks of their respective owners.

User’s Manual

Installing the software

ColorNavigator Software needs to be installed to enable use of EX3. Refer to the User’s Manual

for the software for further details.

How to attach the EX3

Attention

• Before attaching the EX3, remove the stains or dusts on the surface of the monitor.

Connect the upstream port of monitor and the USB downstream port

of PC with the EIZO USB Cable (MD-C93) supplied with your monitor.

Peel off the protective lm on the EX3 surface.

Remove the cap (counterweight) from the sensor.

Sensor

Counterweight

English

Connect the EX3 to the USB downstream port of either the PC

or the monitor.

Suspend the sensor in its measuring position on the monitor by

carefully adjusting the counterweight’s position until both are in

balance.

Counterweight

Slide Slowly

Specyfikacje produktu

Marka:	Eizo
Kategoria:	Sprzęt pomiarowy
Model:	EX3
Wysokość produktu:	69.5 mm
Szerokość produktu:	74.5 mm
Głębokość produktu:	43.5 mm
Waga produktu:	132 g
Standardowe rozwiązania komunikacyjne:	USB 2.0
System operacyjny:	Windows 10 / 8.1 / 8 / 7 \nOS X Mountain Lion (10.8) - El Capitan (10.11)\nMac OS X 10.7.5
Zasilane prze USB:	Tak
Obsługiwane produkty:	CG318-4K, CG248-4K, CG303W, CG301W, CG277, CG276, CG275W, CG247, CG246, CG245W, CG243W, CG242W, CG241W, CG232W, CG221, CG220, CG223W, CG222W, CG211, CG210, CX271, CX270, CX241, CX240, CS270, CS240, CS230