Instrukcja obsługi EK Water Blocks EK-FC R9-280X DCII

EK Water Blocks Sprzęt komputerowy EK-FC R9-280X DCII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EK Water Blocks EK-FC R9-280X DCII (2 stron) w kategorii Sprzęt komputerowy. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/2

All disclosures, notices and warranty conditions are being written on the back of the box. Revision 1.0. Released on 15

of January, 2013.

Installation and mounting manual for EK-FC R9-280X DCII Backplate

This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no liability

whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at www.ekwb.com for updates. Before

installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.

STEP 1: GENERAL INFORMATION. Sample picture of AMD Radeon R9-280X DCII graphics card.

STEP 2: PREPARING YOUR GRAPHICS CARD

EK-FC R9-280X DCII Backplate is very easy to install. First install EK-FC R9-280X DCII series water block according to its installation manual. If you

have it already installed, please check the picture below to see which mounting screws are to be left in their position and which are to be removed.

Please remove the six (6) M3x4 DIN7985 screws and their washers as well (marked with arrow).

STEP 3: APPLYING THE THERMAL PADS

EK-FC R9-280X DCII Backplate features passive cooling of the printed circuit board and it’s components therefore it is mandatory to install the

enclosed thermal pad. Please install enclosed 1mm and 1,5mm thick thermal pad (Thermal Pad A – 1mm (100x16), Thermal Pad C – 1,5mm

(25x25)) as shown on the picture below. You may need to trim the excess thermal pad.