Instrukcja obs艂ugi Elro HA68


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Elro HA68 (1 stron) w kategorii kamera bezpiecze艅stwa. Ta instrukcja by艂a pomocna dla 47 os贸b i zosta艂a oceniona przez 24 u偶ytkownik贸w na 艣rednio 4.4 gwiazdek

Strona 1/1
HA68 QUICK GUIDE
Connect adaptor and insert batteries at control panel (9/10)
Insert batteries
Remote control 7
PIR motion detector 13
Magnetic contact 17
Registration of remote control (27)
Press on control panel (24)
- KEY - PIN CODE (default code= 1234)
- ENTER = Display shows 1 user setup
- ENTER = 1-1 admin setup
- ENTER = Password
Navigate with arrow keys to 6 remote (19)
- ENTER = 6-1 learning ID
- ENTER = wait for learning
Now press OFF button on remote control
Display = learning ok = ok
= time out = pressed too late
= ID duplicate= remote control is already registered
Press and hold ESCAPE button to leave programming mode.
Remote control is now available.
Registration of detectors (36)
Press on control panel
- KEY - PINCODE (default code=1234)-ENTER
Display shows 1 user setup
Navigate with arrow keys to 3 zone setup
- ENTER = input 3-1 ser (01-36) zone selection with number keys starting
with 01
- ENTER = wait for learning
Now press sabotage switch on detector to be registered
Display = learning ok = ok
= time out = pressed too late
= ID duplicate= remote control is already registered
Repeat this procedure with all detectors to be registered; Combination of zones
is freely selected. Press and hold ESC button to leave programming mode.
You will find complete instructions in the manual.


Specyfikacje produktu

Marka: Elro
Kategoria: kamera bezpiecze艅stwa
Model: HA68

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Elro HA68, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮