Instrukcja obsługi Emerson SA2-006

Emerson nieskategoryzowany SA2-006

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emerson SA2-006 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

GEIST™ SWITCH IRA

AIRFLOW MANAGEMENT DEVICE

Quick Installation Guide

VM1181/590-2245-501A 1

RACK

FRONT

RACK

REAR

Models:

SA2-006

Switch Type:

Side Intake - Side or Rear Exhaust

for Core Switches

CAUTION: Ensure the required

airflow for safe operation of

equipment is not compromised

when installing the Geist SwitchAir

device.

WARNING: Take precaution to

avoid interference with the switch’s

input power cords when installing

behind a live switch.

1. Installing the support

channel

Insert the six customer-provided

cage nuts into the four holes on

the front of the support channel

and two holes into the rear

channel extension tab.

Insert the extension tab into the

rear of the support channel.

With the channel facing the

centerline of the rack, hold the

support channel on the inside of

the left rack uprights in the 2U

space just above the network

switch.

Using customer-

provided screws, a

ttach the

channel to the front rack

upright

only in the top and

bottom holes of the 2U space.

Adjust the extension tab to the

proper length and attach the

extension tab onto the rear

upright with two screws.

2. Installing the air channel

Insert the four customer-

provided cage nuts into the four

holes on the front of the air

channel.

In the 2U space opposite the

support channel, hold the air

channel on the inside of the

right rack upright. Orient the air

channel to face the centerline of

the rack with its open leg facing

Geist SwitchAir Airflow Management Device

Support and Air Channels Installation

CENTERLINE

OF RACK

Extension tab

Support channel

Left rack

upright

Right rack

upright

Network switch

Air channel

Cage

nuts

Cage

nuts

Cage

nuts

To contact Vertiv Technical Support: visit www.VertivCo.com

trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no

responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.

GEIST™ SWITCHAIR AIRFLOW MANAGEMENT DEVICE

Quick Installation Guide

2 VM1181/590-2245-501A

RACK

FRONT

RACK

REAR

down.

Fasten in place using

screws only in the top and

bottom holes of the 2U space.

3. Installing the SwitchAir

device into the rack

NOTE: Connect to power

before attaching the SwitchAir

device to the rack. (The

SwitchAir device has a standard

C14 power inlet. Due to the

variety of possible power

source outlet types, an

appropriate power cord must

be determined and supplied by

the customer.)

Insert the SwitchAir device into

the support and air channels.

Using four customer-provided

screws, attach the device to the

rack.

Geist SwitchAir Device Installation

Support channel

Air channel

SwitchAir

device

Airflow

Geist SwitchAir Device Airflow Directions

Specyfikacje produktu

Marka:	Emerson
Kategoria:	nieskategoryzowany
Model:	SA2-006
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	90 - 264 V
Wysokość produktu:	87 mm
Szerokość produktu:	432 mm
Głębokość produktu:	457 mm
Waga produktu:	12250 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Certyfikaty:	CE, FCC Part 15 Class A Conformance, UL & c-UL Listed 60950
Rodzaj chłodzenia:	Aktywne
Prąd wejściowy:	0.65 A
Możliwości montowania w stelażu:	Tak
Pojemność stelaża:	2U
Rodzaj ramy:	Otwarta rama
Maksymalny przepływ powietrza:	188 ft³/min