Instrukcja obsługi Enda EPA133

Enda Sprzęt pomiarowy EPA133

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Enda EPA133 (4 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.4 gwiazdek

Pobierz PDF
Strona 1/4
TECHNICAL SPECIFICATIONS
ENDA EPA242 PROGRAMMABLE AC/DC AMMETER
Read this document carefully before using this device. The guarantee will be expired by damaging of the device if you don't
attend to the directions in the user manual. Also we don't accept any compensations for personal injury, material damage or
capital disadvantages.
77 x 35mm sized
4 digits display
Easy to use with front panel keypad
Programmable scale between 5A and 9999A
Multifunctional alarm output (NO+NC) for upper and lower limits
Communication feature over isolated RS485, using ModBus RTU protocol ( )
Measuring type can be selected as AC, DC or true RMS
Key lock feature
0-20mA, 4-20mA, 0-10V or 1-5V Output selection (For only “A” type output devices)
CE marked according to European Norms
5A or 60mV, CT20/30 Current Transformer or 60mV input (Specify at Order)
(Optional)
Optional
Thank you for choosing rogrammable AC/DC mmeterENDA EPA242 P A
ENVIRONMENTAL CONDITIONS
Height
Max. 2000m
80 up to 31Relative humidity for temperatures% °C decreasing linearly 50% at 40°C., to
Ambient/stroge temperature
Max. Relative humidity
0 ... +50°C/-25 ... 70°C
Rated pollution degree
According to EN 60529 Front panel : IP6 , Rear5 panel : IP20
Do not use the device in locations subject to corrosive and flammable gases.
Order Code : EPA242 - - - -
1 3 4
2 - Output
R..........Relay
A...........Analog Output
Blank....No Output
4 Isolated ModBus -
RS ...... ModBus
( )
I Isolated
Specify at Order .
3 - Supply Voltage
230VAC...230V AC
110VAC...110V AC
24VAC.....24V AC
SM...........9-30V DC / 7-24V AC
2
1 - Input
CT.......CT20/30 Current
Transformer Input or 60mV
Blank....5A or 60mV
While input type in 5A / 60mv ; = 0A...5A 0A...9999A ( Determined by parameter. e.g ; If , scale is )c.tr.r c.tr.r 5
0.002A x ( e.g ; For , sensitivity is )c.tr.r 5 = 0.01Ac.tr.r
AC
RMS
DC
1
40k
2mΩ
Ω
AC and RMS
DC
%1
±
and
and
12
9
11
10
%1
±
%1
±
and
and
12
9
11
10
While input type in CT20/30 / 60mV ;
= 0A...300A = 0A...300A
= 0A...120A = 0A...120A
= 0A..9999A = 0A...5A
If , input range is ( Determined by parameter. e.g ; If , scale is )
If , input range is ( Determined by parameter. e.g ; If , scale is )
If , input range is (Determined by parameter. e.g ; If , scale is )
ityp Ct20 turn turn 1
ityp Ct30 turn turn 1
ityp 5Hnt c.tr.r c.tr.r 5
ELECTRICAL CHARACTERISTICS
Supply
Power consumption
Wiring
Scale
EMC
Safety equirementsR
Input Impedance
Frequency Range
Input Range
Sensitivity
Accuracy
230V AC +10% -20%, 50/60Hz or 24V AC 10% , 50/60Hz or optional 9-30V DC / 7-24V AC 10% SMPS± ±
Max. VA5
2.5mm² screw-terminal connections
While input type in 5A / 60mv ; = -5A...5A -999A...9999A ( Determined by parameter. e.g ; If , scale is )c.tr.r c.tr.r 5
While input type in CT20/30 / 60mV ;
= 0A..9999A = -5A...5A
DC Measurement can not be performed by using current transformer.
If , input range is (Determined by parameter. e.g ; If , scale is )ityp 5Hnt c.tr.r c.tr.r 5
(full scale) ( For square wave form)± 2%
(full scale)
(full scale) ( For square wave form)± 2%
or CT20/30 input devices 0....150mA-5A...5A
-60mV...60mV
( Device 10A current )
( Device 50V voltage )
may be damaged at and above s
may be damaged at and above s
EN 61326-1: 2013
EN 61010-1: 20 (Pollution degree 2, overvoltage category II)10
DC , 10Hz - 200Hz ( For square wave form)10Hz - 70Hz
Mechanical 30.000.000 ; Electrical 100.000 operation.
OUTPUTS
Alarm output
Relay: 250V AC, 8A (for resistive load), NO+NC
Life expectancy for relay
outputAnalog
0-20mA DC, 4-20mA DC, 0-10V DC 1-5V DC . ( Ω)or selection Load resistance for current outputs are max. 500
HOUSING
Housing type
Suitable for flush-panel mounting. (According to DIN 43 700)
Dimensions
W7 xH xD mm7 35 61
Weight
Enclosure material
Self extinguishing plastics.
Approx. 50g (after packing)2
While cleaning the device, solvents (thinner, , acid etc.) or corrosive materials must not be used.gasoline
CT20/30 Current Transformer must be ordered separately.
SET
EPA242
ENDA
OUT AC DC ACDC
A
0.000
english
EPA242-E-290319
1. / 4
E-mail : info@suran-elektronik.de
Internet : www.suran-elektronik.de
Tel.: +49 (0)7451 / 625 617
Fax: +49 (0)7451 / 625 0650
SURAN Industrieelektronik
Dettinger Str. 9 / D-72160 Horb a.N

Specyfikacje produktu

Marka: Enda
Kategoria: Sprzęt pomiarowy
Model: EPA133

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Enda EPA133, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Enda

Enda

Enda EPV242 Instrukcja

5 Października 2024
Enda

Enda EPA133 Instrukcja

5 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Uni-T

Uni-T UT220 Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT681C Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT216C Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT611 Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT210D Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT210C Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT210B Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT682 Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT275 Instrukcja

3 Kwietnia 2025
Uni-T

Uni-T UT08A Instrukcja

3 Kwietnia 2025