Instrukcja obsługi Epson WorkForce Pro WP-4010

Epson drukarka WorkForce Pro WP-4010

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Epson WorkForce Pro WP-4010 (4 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.6 gwiazdek

Strona 1/4
Start Here
Read these instructions before using your printer.
1 Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2 Turn on
1 Connect the power cord to the back of the printer and to an
electrical outlet.
Do not connect to your computer yet.Caution:
2 Press the power button.
3 Install ink cartridges
1 Open the front cover.
2 Unpack the four ink cartridges.
3 Shake each cartridge as shown for about 5 seconds.
4 Install each cartridge in the correct slot for its color.
Push each cartridge in until it clicks.
5 Close the front cover.
The printer starts priming the ink. This takes about 12
minutes. When the green power light stops flashing,
priming is complete.
Note: The included cartridges prime the printer and print about 1000
black pages/900 color pages. Actual page count will vary.
Caution: Don’t turn off the printer or open the cover while it is
priming or you’ll waste ink.
*412238700*
*412238700*
WorkForce® Pro WP-4010 Series


Specyfikacje produktu

Marka: Epson
Kategoria: drukarka
Model: WorkForce Pro WP-4010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Epson WorkForce Pro WP-4010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą