Instrukcja obsługi Esoteric A-02
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Esoteric A-02 (3 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 31 osób i została oceniona przez 16 użytkowników na średnio 3.9 gwiazdek
Strona 1/3
Stereo Power Am plif ier A - 0 2
Abundant use of high-grade components
pursued for both their properties and audibility
Securing signal clarity and minimizing transmission loss
maximizes pure amplifier performance. Rigorously selected
components are used to satisfy to the greatest extent possible
such requirements for power amplifiers. Highly reliable XLR input
terminals that boast contact performance and Esoteric’s original
RCA input terminals are just some of those implementations.
WBT nextgen WBT-0710Cu speaker terminals are also
employed. These conductor cores utilize pure copper with gold
plating to achieve high conductivity and low resistance.
Moreover, the A-02 employs high-grade components such as
electrolytic capacitors and transistors with excellent high
frequency characteristics achieved through property examina-
tion and repeated trial listening.
Ingenious chassis structure
that intricately fuses precision and
vibration suppression
Internal circuit components are separated into dedicated inner
compartments for each circuit, partitioned by 2 mm steel walls.
The bottom chassis utilizes 5 mm thick steel for additional
isolation that prevents interference between circuits and
minimizes the adverse effects of resonance caused by internal
and external vibration. The extremely robust inner chassis is
composed of a 20 mm thick aluminum front panel and 5 mm
thick top. It is also supported at four points on Esoteric-original
pinpoint feet. These and other measures help to keep the
housing highly rigid and resonance-free. What’s more, an
approx. 41.5 kg weight (91.5 lbs.) speaks volumes for the rigidity
of the A-02.
Tranquil yet strong expression in a design
that evokes rich musical qualities
A design idea that shows off high-end aspirations through and
through comes into being in a simple body form. That form
incorporates structural beauty, featuring bold design with
delicate shadowing as well as black alumite-processed large
heat sinks symmetrically located on the left and right sides of the
housing. A sense of unity with Esoteric’s high-end lineup is also
projected, bringing about unrivaled presence when putting
together an audio system.
Specifications
Speaker Outputs
Rated output power STEREO 200 W + 200 W (1 kHz, 8 Ω)
400 W + 400 W (1 kHz, 4 Ω)
BTL 800 W (1 kHz, 8 Ω)
Maximum output power STEREO 250 W + 250 W (1 kHz, 8 Ω) (JEITA)
500 W + 500 W (1 kHz, 4 Ω) (JEITA)
BTL 1,000 W (1 kHz, 8 Ω) (JEITA)
Frequency response 5 Hz - 100 kHz (1 W, 8 Ω, ±1 dB)
Signal-to-noise ratio (S/N) 117 dB or more (JEITA)
Total harmonic distortion 0.009 % (1 kHz, 8 Ω, Rated output power)
Minimum required impedance STEREO 4 Ω / BTL 4 Ω
Gain 28 dB
Analog audio inputs
Jacks RCA jacks 1 stereo / XLR jacks 1 stereo
Input impedance RCA 150 kΩ / XLR 320 kΩ
General
Power supply AC 230V 50Hz / AC 120V 60Hz / AC 220V 60Hz
Power consumption 550 W
External dimensions (W x H x D)
445 x 220 x 430 mm (17 1/2” x 8 5/8” x 16 15/16” ) (including protrusions)
Weight 41.2 kg (91.5 lb)
- This product is available in three different power supply variations shown in the chart above.
Make sure that the voltage shown on the rear panel matches the AC line voltage in your area.
- The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating
and destination country.
ESOTERIC COMPANY
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan
Fax: (042)356-9240
www.esoteric.jp
www.esoteric.teac.com/
Please note that Esoteric products are available at limited distributors in respective countries．
" ESOTERIC " is a trademark of TEAC Corporation．All other brand or product names are trademarks or registered trademarks of their respective holders
©2011 TEAC Corporation. All Rights Reserved．All text, images, graphics and other materials on this catalogue are subject to the copyright and other intellectual
property rights of TEAC Corporation．These materials shall not directly or indirectly be published, reproduced, modified or distributed in any medium．
Design and specifications are subject to change without notice．
PRINTED IN JAPAN 0511O00•TECD-0132 English version
Specyfikacje produktu
| Marka: | Esoteric |
| Kategoria: | odbiornik |
| Model: | A-02 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Esoteric A-02, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje odbiornik Esoteric
26 Grudnia 2024
30 Września 2024
29 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
20 Września 2024
18 Września 2024
18 Września 2024
Instrukcje odbiornik
- Insignia
- QTX
- Blackstar
- Monitor Audio
- Atlas
- Canor
- Powersoft
- Aiwa
- Crestron
- Pharos
- Sunstech
- Sound Ordnance
- Kramer
- Monoprice
- Soundstream
Najnowsze instrukcje dla odbiornik
9 Kwietnia 2025
9 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025