Instrukcja obsługi EtherWAN EX41941F
EtherWAN
Karta sieciowa/adapter
EX41941F
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EtherWAN EX41941F (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/2
Copyright 2022 EtherWAN Systems, Inc. Page 1
All Rights Reserved
EX41941
8/2/2022
EX41941 Hardened PoE Switch
Installation Guide
1 Unpacking
Unpack the items. Your package should
include:
One EX41941 PoE switch
Power input terminal block
Wall and DIN-Rail mounting hardware
brackets
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton
and packing material.
More information available at:
https://www.etherwan.com/us
For warranty information, visit:
https://www.etherwan.com/us/support/war
ranty-policy
2 Equipment Needed
Category 5e or better cable for RJ-45
ports
48VDC power supply with voltage
adjustable up to 56VDC and power output
to handle 120W PoE power budget.
3 Select a Location
DIN-rail installations: Attach the bracket
on the unit using the included screws and
then mount on a DIN-rail.
Wall installations: Attach the brackets on
the unit using the included screws and
then mount on a wall.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient
temperature between -40 and 75ºC (-40
and 167ºF).
Keep away from heat sources, sunlight,
warm air exhausts, hot-air vents, and
heaters.
Make sure there is adequate airflow.
4 Connect to the Ports
The EX41941 has the following ports:
4 10/100/1000 Mbps PoE ports
1 10/100/1000 Mbps RJ-45 uplink port
10/100/1000BASE-T Ports
Ports 1 to 4 are gigabit copper ports that are
compliant with IEEE 802.3af/at PoE protocol,
with up to 30W power output per port. Port 5
is a gigabit copper port that can be utilized
for data uplink.
5 Connect Power
Terminal Block
Connect the unit to a suitable power supply
using appropriate wire, 18-24 AWG, rated for
105°C or higher.
Redundant power is supported. However,
only one power input is required to operate
the unit.
1. Connect power wires to the
appropriate V1+/- or V2+/- pins on
the terminal block.
2. Connect the grounding wire to the
ground screw.
3. Plug the terminal block into the
socket.
+V1- +V2-
Copyright 2022 EtherWAN Systems, Inc. Page 2
All Rights Reserved
EX41941
8/2/2022
EX41941 Hardened PoE Swit ch
Installation Guide
6 Front Panel LEDs
LED Panel Layout
LED Color Status
Power
1/2
Green ON = power detected
OFF = power not detected
PoE
(1-4)
Amber ON = PD is detected
Off = No PD detected
Link/ACT
Green ON = Connection
established
Off = Link not detected
Flashing = Port is sending
or receiving data
TX
(5)
G reen ON = Connection
established
Off = Link not detected
Flashing = Port is sending
or receiving data
7 Notes
Specyfikacje produktu
| Marka: | EtherWAN |
| Kategoria: | Karta sieciowa/adapter |
| Model: | EX41941F |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z EtherWAN EX41941F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Karta sieciowa/adapter EtherWAN
3 Kwietnia 2025
2 Kwietnia 2025
Instrukcje Karta sieciowa/adapter
- Karta sieciowa/adapter Intel
- Karta sieciowa/adapter ScreenBeam
- Karta sieciowa/adapter StarTech.com
- Karta sieciowa/adapter D-Link
- Karta sieciowa/adapter Dahua Technology
- Karta sieciowa/adapter GeoVision
- Karta sieciowa/adapter I-TEC
- Karta sieciowa/adapter Vivanco
- Karta sieciowa/adapter Oehlbach
- Karta sieciowa/adapter Iconbit
- Karta sieciowa/adapter ZyXEL
- Karta sieciowa/adapter Code Corporation
- Karta sieciowa/adapter Tenda
- Karta sieciowa/adapter Simplecom
- Karta sieciowa/adapter Media-Tech
Najnowsze instrukcje dla Karta sieciowa/adapter
8 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
29 Marca 2025
14 Marca 2025
14 Marca 2025
12 Marca 2025
10 Marca 2025