Instrukcja obsługi EXSYS EX-1315IS


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EXSYS EX-1315IS (2 stron) w kategorii Inne akcesoria komputerowe. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 3 użytkowników na średnio 4.7 gwiazdek

Strona 1/2
6
5
Die EX-1315IS USB 3.2 Gen 1 Dockingstation stellt einen seriellen RS232 Port mit
Überspannungsschutz und Isolation, einen Port mit Ethernet 10/100/1000Mbps sowie zwei USB
3.2 Gen 1 Ports zur Verfügung. Durch die einfache Installation muss der Rechner nicht geöffnet
werden und die EX-1315IS kann bei laufendem Betrieb installiert werden.
Kompatibilität: USB 1.1, 2.0, 3.0, 3.1, 3.2 / TCP/IP 10/100/1000
Betriebssysteme: Win 9.x/ME/2000/XP/Vista/7/8.x/10/11/Server 20xx/Linux/MAC
Anschlüsse: 1x USB 3.0 B-Buchse, 2x USB 3.0 A-Buchse, 1x 9 Pin D-SUB Stecker,
1x RJ45 Ethernet Anschluss, 1x T-Block 7-48V, 1x 12V/3A Buchse
Lieferumfang: EX-1315IS, USB-Kabel, DIN-Rail Kit, Netzteil 12V/3A, Anleitung
1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
CONNECTORS
CLEANING
DRIVER INSTALLATION
Serial RS-232
After the hardware installation Windows will recognize the device automatically and install the
drivers. If the driver should not be installed automatically, please download the driver from our
homepage (www.exsys.de / www.exsys.ch) first. Now select the folder with your operating
system and install the driver. Follow the hardware assistant and finish the installation.
Important! Restart your PC in any case after installing the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at Ports (COM & LPT) and USB-
Controller the following new entry:
If you see this or a similar information the device is installed correctly.
To clean the unit, use only a dry, lint-free cloth and apply light pressure to remove dirt. Be
careful not to leave any fibres of the cloth in the connector area.
Never use a damp or wet cloth for cleaning!
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Italy:
EXSYS Italia Srl
Via Belvedere, 45/B
I-22100 Como
www.exsys.it
Anleitung
Vers. 1.0, 21.12.22
Anleitung
Vers. 1.1 / 22.08.24
EX-1315IS
ANSCHLÜSSE
HARDWARE INSTALLATION
Because there are large differences between PCs, we can give you only a general installation
guide for the EX-1315IS. Please refer your computers reference manual whenever in doubt.
1. Connect the EX-1315IS USB to the USB A-Port at the your PC.
2. When you are ready you can start your PC and continue with the Driver Installation.
USB 3.0 B-Buchse
Betriebs LED
9 Pin Seriell RS-232 Stecker
RJ45 Anschluss mit Status LED´s
2 x USB 3.0 A-Buchse
12V/3A DC Buchse
Terminal Block +7V~+48V
Achtung!
Stecker niemals umgekehrt
oder mit Gewalt einstecken.
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+ D-
GND
USB 3.2 B-Buchse:
Attention!
Never plug in with force
or in wrong direction.
USB 3.2 A-Port:
RS-232 Connector:
Serial 9 Pin D-SUB Connector
Pin Signal Pin Signal Pin Signal
1 CDC 4 DTR 7 RTS
2 RXD 5 GROUND 8 CTS
3 TXD 6 DSR 9 RI
RJ45 Connector:
RJ45 Connector
Pin Signal Pin Signal Pin Signal
1 BI_DA+ 4 BI_DC+ 7 BI_DD+
2 BI_DA- 5 BI_DC- 8 BI_DD-
3 BI_DB+ 6 BI_DB-
+7V ~ 24V T-Block:
+7V ~ 24V
GND (Ground)
ATTENTION!!!
Never connect power to GND it will destroy your Hardware!
ATTENTION!!!
Use only with included power supply!
12 Volt Connector:
Ehernet LAN
After the hardware installation Windows will recognize the device automatically and install the
drivers. If the driver should not be installed automatically, please download the driver from our
homepage (www.exsys.de / www.exsys.ch) first. Now select the folder with your operating
system and install the driver. Follow the hardware assistant and finish the installation.
Important! Restart your PC in any case after installing the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at Ethernet Adapter the following new
entry:
If you see this or a similar information the device is installed correctly.
USB 3.2
After the hardware installation, the OS will recognize the device automatically and install the
drivers
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at USB Devices the following new entry:
<Generic USB Hub>.


Specyfikacje produktu

Marka: EXSYS
Kategoria: Inne akcesoria komputerowe
Model: EX-1315IS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EXSYS EX-1315IS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Inne akcesoria komputerowe EXSYS

EXSYS

EXSYS EX-1412 Instrukcja

1 Października 2024
EXSYS

EXSYS EX-1315IS Instrukcja

1 Października 2024

Instrukcje Inne akcesoria komputerowe

Najnowsze instrukcje dla Inne akcesoria komputerowe

ATen

ATen UH3240 Instrukcja

1 Kwietnia 2025
Act

Act AC7049 Instrukcja

20 Lutego 2025
Act

Act AC7092 Instrukcja

20 Lutego 2025
Act

Act AC7091 Instrukcja

20 Lutego 2025
Act

Act AC7048 Instrukcja

20 Lutego 2025
Act

Act AC7095 Instrukcja

20 Lutego 2025