Instrukcja obs艂ugi Extron SMK VRE 48
Extron
obs艂uga g艂o艣nik贸w
SMK VRE 48
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Extron SMK VRE 48 (2 stron) w kategorii obs艂uga g艂o艣nik贸w. Ta instrukcja by艂a pomocna dla 19 os贸b i zosta艂a oceniona przez 10 u偶ytkownik贸w na 艣rednio 4.2 gwiazdek
Strona 1/2
SMK VRE 48 Setup Guide
The Extron SMK VRE 48 V-Rail Extension Kit allows the V-rails that ship with the SF Series
speakers to span 4' (1.2 m) tile grids. The extension bars use the same interlocks as the
modular V-rails that ship with the SoundField
庐 XD speakers, allowing the pieces to snap
together (see the speaker user manual for further details).
The V-rail extension bar is connected between the two V-rail half sections that come with the
speakers (see the steps below).
1. Assemble the V-rail to the extension bar by 顦焧ting the tab on the V-rail end into the
slot on the extension end .1
2. Open the extension bar
until it locks together
with the V-rail . 2
3. Assemble the other V-rail
end to the extension bar
end by 顦焧ting the slot on
the V-rail end onto the tab
on the extension end .3
4. Rotate the V-rail end
until it locks together
with the extension bar . 4
1
23
4
Extension
Extension
V
-Rail
ends
Top View
Side View
V-Rail
ends
68-3377-50 Rev. B
04 19
漏 2019 Extron Electronics. All rights reserved. www.extron.com
See the on the Extron websiteExtron Safety and Regulatory Compliance Guide .
5. Insert the two included screws through each end of the extension bar in step 4.
6. Repeat steps 1 through 5 for the
other V-rail extension bar.
7. Position the C-ring assembly on the
assemblies so that the C-ring is cen
over the hole in the tile.
8. Secure the C-ring to the V-rail
assemblies using two screws
that came with the speakers.
9. Refer to the speaker setup
guide for complete
installation details. V-rail
C-ring
Screws
1 2 3 4
1 2 3 4
Overlapping
area
Tighten with screw
at 1st hole.
Overlapping area
Tighten with scr
ew
at 4th hole.
Specyfikacje produktu
| Marka: | Extron |
| Kategoria: | obs艂uga g艂o艣nik贸w |
| Model: | SMK VRE 48 |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Extron SMK VRE 48, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje obs艂uga g艂o艣nik贸w Extron
9 Pa藕dziernika 2024
9 Pa藕dziernika 2024
Instrukcje obs艂uga g艂o艣nik贸w
- obs艂uga g艂o艣nik贸w Pro-Ject
- obs艂uga g艂o艣nik贸w Konig & Meyer
- obs艂uga g艂o艣nik贸w K&M
- obs艂uga g艂o艣nik贸w Chief
- obs艂uga g艂o艣nik贸w Crestron
- obs艂uga g艂o艣nik贸w Valcom
- obs艂uga g艂o艣nik贸w Monoprice
- obs艂uga g艂o艣nik贸w Best Buy
- obs艂uga g艂o艣nik贸w Adj
- obs艂uga g艂o艣nik贸w Focal
- obs艂uga g艂o艣nik贸w Vimar
- obs艂uga g艂o艣nik贸w Peerless-AV
- obs艂uga g艂o艣nik贸w Philips
- obs艂uga g艂o艣nik贸w Sanus Systems
- obs艂uga g艂o艣nik贸w Vivolink
Najnowsze instrukcje dla obs艂uga g艂o艣nik贸w
14 Stycznia 2025
14 Stycznia 2025
31 Grudnia 2025
31 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
28 Grudnia 2024
26 Grudnia 2024