Instrukcja obsługi Festo NECL-S-L12W5-C2-Q10

Festo Niesklasyfikowane NECL-S-L12W5-C2-Q10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Festo NECL-S-L12W5-C2-Q10 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
NECL-L1 -C2-Q10 2W5 / NECL-S-L12 -C2-Q10W5
Power supply socket - angled - PIN ฀ ฀฀
male female
enclosed sealing Ø 8 - 10,5mm
Ø 10,5 - 13mm
AWG 14 without wire-end ferrule
Cross-sectional area max. 1.50 mwith ferrule
max. 2.50 mwithout ferrule
AWG 16 with wire-end ferrule
Cable Assemblies and Fittings for Industrial
Control and Signal Distribution
Electrical connection 1 M12-L coded, 4 pins + FE
Rated voltage 63 V
Certificates C UL us – Recognized (OL) UL2238- E474609
Technical information
All available documents for the product - www.festo.com/sp.
Assembly instruction
3 Scale drawing and tecnical information
2 Assembly instruction
1 Applicable documents
8177386
202 -211
[8 ]177388
© 2022 all rights reserved to Festo SE & Co. KG
1. Clamp out screws until bores for single wires
are completely free.
2. Push sleeve, the suitable seal, and the
pressing screw onto the cable part by part.
3. Cut off cable coating.
4. Strip single cores and twist single wires.
5. Insert single wires into the holes and tighten
clamping screws (0,4 m). N
6. Slide angled sleeve to the contact insert
(if necessary, pull on the cable), press and
screw with it.
Pay attention to the position of the coding
to the cable outlet.
Adjustable in 72° steps
7. Push seal into the angled sleeve as far as it
will go, if necessary, press in with the plat side
of the screwdriver blade.
8. Screw pressing screw
It is possible to turn and fix the contact carrier
in 5 different 72° positions
Contact arrangement (plug-in side)


Specyfikacje produktu

Marka: Festo
Kategoria: Niesklasyfikowane
Model: NECL-S-L12W5-C2-Q10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Festo NECL-S-L12W5-C2-Q10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Festo

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025