Instrukcja obsługi First Alert SMICO110

First Alert czujnik dymu SMICO110

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla First Alert SMICO110 (2 stron) w kategorii czujnik dymu. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/2

USER’S MANUAL

SMOKE & CARBON MONOXIDE ALARM

10-YEAR SEALED BATTERY

Model SMICO110

IMPORTANT! PLEASE READ CAREFULLY AND SAVE.

The warnings/limitations card and manual contains important

information about your Smoke Alarm’s operation. If you are

installing this Alarm for use by others, you must leave this

manual—or a copy of it—with the end user.

Para el manual del usuario en español, por favor

visite rstalert.com

! WARNING!

• This unit will not alert hearing impaired residents. It is recommended that you

install special units which use devices like ashing strobe lights to alert hearing

impaired residents.

• Do not connect this unit to any other Alarm or auxiliary device. It is a single-station unit

that cannot be linked to other devices. Connecting anything else to this unit may prevent

it from working properly.

• Unit will not operate without battery power. The Smoke Alarm cannot work until you

activate the battery power pack.

! CAUTION!

• Do not install this unit over an electrical junction box. Air currents around junction boxes

can prevent smoke from reaching the sensing chamber and prevent the unit from

Alarming. Only AC powered units are intended for installation over junction boxes.

• Do not stand too close to the unit when the Alarm is sounding. It is loud to wake you in an

emergency. Exposure to the horn at close range may harm your hearing

• Do not paint over the unit. Paint may clog the openings to the sensing chamber and

prevent the unit from operating properly.

INTRODUCTION

Thank you for choosing First Alert

for your Smoke and Carbon Monoxide Alarm needs. You have

purchased a state-of-the-art Smoke & Carbon Monoxide Alarm designed to help provide you with early

warning of a smoke and/or carbon monoxide danger. Please take the time to read this manual and

make the Smoke & Carbon Monoxide Alarm an integral part of your family’s safety plan.

BASIC SAFETY INFORMATION

IMPORTANT!

• Dangers, Warnings, and Cautions alert you to important operating instructions or to potentially

hazardous situations. Pay special attention to these items.

• This Smoke/CO Alarm is approved for use in single-family residences. It is designed for NOT

marine or RV use.

! CAUTION!

• This combination Smoke/Carbon Monoxide Alarm has two separate Alarms. The CO Alarm is not

designed to detect re or any other gas. It will only indicate the presence of carbon monoxide

gas at the sensor. Carbon monoxide gas may be present in other areas. The Smoke Alarm will

only indicate the presence of smoke that reaches the sensor. The Smoke Alarm is not designed to

sense gas, heat or ames.

! WARNING!

• ignore any Alarm. See “If Your Smoke/CO Alarm Sounds” for more information on how to NEVER

respond to an Alarm. Failure to respond can result in injury or death.

• The Silence Features are for your convenience only and will not correct a problem. See “Using the

Silence Features” for details. Always check your home for a potential problem after any Alarm.

Failure to do so can result in injury or death.

• Test this Smoke/CO Alarm once a week. If the Alarm ever fails to test correctly, have it replaced

immediately! If the Alarm is not working properly, it cannot alert you to a problem.

ABOUT SMOKE ALARMS

TYPES OF ALARMS

All these Smoke Alarms are designed to provide early warning of res if located, installed and cared

for as described in the user’s manual, and if smoke reaches the Alarm. If you are unsure which type of

Smoke Alarm to install, refer the National Fire Protection Association (NFPA) Standard 72 (National Fire

Alarm and Signaling Code) and NFPA 101 (Life Safety Code). National Fire Protection Association, One

Batterymarch Park, Quincy, MA 02269-9101. Local building codes may also require specic units in

new construction or in different areas of the home.

Battery (DC) operated Smoke Alarms: Provide protection even when electricity fails, provided the

batteries are fresh and correctly installed. Units are easy to install, and do not require professional

installation. They do not, however, provide interconnected functionality.

AC powered Smoke Alarms: Can be interconnected so if one unit senses smoke, all units Alarm.

They do not operate if electricity fails.

AC with battery (DC) back-up: will operate if electricity fails, provided the batteries are fresh and

correctly installed. AC and AC/DC units must be installed by a qualied electrician.

Wireless Interconnected Alarms: Offer the same interconnected functionality as with hardwired

Alarms, without wires. Units are easy to install and do not require professional installation. They

provide protection even when electricity fails, provided the batteries are fresh and correctly installed.

Smoke Alarms for solar or wind energy users and battery backup power systems: AC powered

Smoke Alarms should only be operated with true or pure sine wave inverters. Operating this Smoke

Alarm with most batterypowered UPS (uninterruptible power supply) products or square wave or

“quasi sine wave” inverters If you are not sure about your inverter or UPS will damage the Alarm.

type, please consult with the manufacturer to verify.

Smoke Alarms for the hearing impaired:

Special purpose Smoke Alarms should be installed for the

hearing impaired. They include a visual Alarm and an audible Alarm horn, and meet the requirements of the

Americans With Disabilities Act. These units can be interconnected so if one unit senses smoke, all units Alarm.

Smoke Alarms are not to be used with detector guards unless the combination has been evaluated

and found suitable for that purpose.

All First Alert

Smoke Alarms conform to regulatory requirements, including UL217 and are

designed to detect particles of combustion. Smoke particles of varying number and size are

produced in all res.

Ionization technology is generally more sensitive than photoelectric technology at

detecting small particles, which tend to be produced in greater amounts by aming res,

which consume combustible materials rapidly and spread quickly. Sources of these res

may include paper burning in a wastebasket, or a grease re in the kitchen.

Photoelectric technology is generally more sensitive than ionization technology at

detecting large particles, which tend to be produced in greater amounts by smoldering

res, which may smolder for hours before bursting into ame. Sources of these res may

include cigarettes burning in couches or bedding.

For maximum protection, use both types of Smoke Alarms on each level and in every

bedroom of your home.

INSTALLATION

WHERE TO INSTALL THIS ALARM

Minimum coverage for Smoke Alarms, as recommended by the National Fire Protection Association

(NFPA), is one Smoke Alarm on every oor, in every sleeping area, and in every bedroom (See

“Regulatory Information For Smoke Alarms” for details on the NFPA recommendations).

For CO Alarms, the National Fire Protection Association (NFPA) recommends that a CO Alarm

should be centrally located outside of each separate sleeping area in the immediate vicinity of the

bedrooms. For added protection, install additional CO Alarms in each separate bedroom, and on every

level of your home.

NOTE: For added protection, install an additional Smoke/CO Alarm at least 15 feet (4.6 meters) away

from the furnace or fuel burning heat source where possible. In smaller homes or in manufactured

homes where this distance cannot be maintained, install the Alarm as far away as possible from the

furnace or other fuel burning source. Installing the Alarm closer than 15 feet (4.6 meters) will not harm

the Alarm, but may increase the frequency of unwanted Alarms.

IN GENERAL, INSTALL COMBINATION SMOKE AND CARBON MONOXIDE ALARMS:

• On every level of your home, including nished attics and basements.

• Inside every bedroom, especially if people sleep with the door partly or completely closed.

• In the hall near every sleeping area. If your home has multiple sleeping areas, install a unit in each.

If a hall is more than 40 feet (12 meters) long, install a unit at each end.

• At the top of rst-to-second oor stairs.

• At the bottom of the basement stairs.

• For additional coverage, install Alarms in all rooms, halls, and storage areas, where temperatures

normally remain between 40˚ F and 100˚ F (4.4˚ C and 37.8˚ C).

RECOMMENDED PLACEMENT:

Smoke Alarm

One on every level and

in every bedroom

Carbon Monoxide Alarm

One on every level and

in every bedroom

Fire Extinguisher

One on every level, plus

kitchen and garage

• When installing on the wall, the top edge of Smoke Alarms should be placed between 4 inches

(102 mm) and 12 inches (305 mm) from the wall/ceiling line.

• When installing on the ceiling, place the Alarm as close to the center as possible.

• In either case, install at least 4 inches (102 mm) from where the wall and ceiling meet.

NOTE: For any location, make sure no door or other obstruction could keep carbon monoxide or smoke

from reaching the Alarm.

WHERE NOT TO INSTALL THIS ALARM

FOR BEST PERFORMANCE, IT IS RECOMMENDED YOU AVOID INSTALLING SMOKE/CO ALARMS

IN THESE AREAS:

• In garages, furnace rooms, crawl spaces and unnished attics. Avoid extremely dusty, dirty

or greasy areas.

• Where combustion particles are produced. Combustion particles form when something burns.

Areas to avoid include poorly ventilated kitchens, garages, and furnace rooms. Keep units at

least 20 feet (6 meters) from the sources of combustion particles (stove, furnace, water heater,

space heater) if possible. In areas where a 20-foot (6 meter) distance is not possible – in modular,

mobile, or smaller homes, for example – it is recommended the Smoke Alarm be placed as far

from these fuel-burning sources as possible. The placement recommendations are intended

to keep these Alarms at a reasonable distance from a fuel-burning source, and thus reduce

“unwanted” Alarms. Unwanted Alarms can occur if a Smoke Alarm is placed directly next to a

fuel-burning source. Ventilate these areas as much as possible.

• Within 5 feet (1.5 meters) of any cooking appliance. In air streams near kitchens. Air currents can

draw cooking smoke into the smoke sensor and cause unwanted Alarms.

• In extremely humid areas. This Alarm should be at least 10 feet (3 meters) from a shower, sauna,

humidier, vaporizer, dishwasher, laundry room, utility room, or other source of high humidity.

• In direct sunlight.

• In turbulent air, like near ceiling fans or open windows. Blowing air may prevent CO or smoke from

reaching the sensors.

• In areas where temperature is colder than 40˚ F (4.4˚ C) or hotter than 100˚ F (37.8˚ C). These

areas include non-airconditioned crawl spaces, unnished attics, uninsulated or poorly insulated

ceilings, porches, and garages.

• In insect infested areas. Insects can clog the openings to the sensing chamber.

• Less than 12 inches (305 mm) away from uorescent lights. Electrical “noise” can interfere

with the sensor.

• In “dead air” spaces.

AVOIDING DEAD AIR SPACES

“Dead air” spaces may prevent smoke from reaching the Smoke/CO Alarm. To avoid dead air spaces,

follow installation recommendations below.

On ceilings, install Smoke/CO Alarms as close to the center of the ceiling as possible. If this is not

possible, install the Smoke/CO Alarm at least 4 inches (102 mm) from the wall or corner.

For wall mounting (if allowed by building codes), the top edge of Smoke/CO Alarms should be placed

between 4 inches (102 mm) and 12 inches (305 mm) from the wall/ceiling line.

On a peaked, gabled, or cathedral ceiling, install the rst Smoke/CO Alarm within 3 feet (0.9

meters) of the peak of the ceiling, measured horizontally. Additional Smoke/CO Alarms may be required

depending on the length, angle, etc. of the ceiling’s slope. Refer to NFPA 72 for details on requirements

for sloped or peaked ceilings.

HOW TO INSTALL THIS ALARM

This unit is designed to be mounted on the ceiling, or

on the wall if necessary.

Tools you will need: pencil, drill with 3/16" (5 mm)

drill bit, standard athead screwdriver, hammer.

THE PARTS OF THIS SMOKE/CO ALARM

Smoke/CO LED (RED)

Power LED (GREEN)

Test/Silence button

Mounting Bracket

Locking pins

(break out of bracket)

Mounting Slots

Turn this way to remove

Turn this way to attach

FOLLOW THESE SIMPLE STEPS

1. Choose a location. See “Where to Install This

Alarm” for reference.

WARNING! Do not install this Alarm over an existing

electrical box. Only AC powered units are intended for

installation over electrical boxes.

2. Hold the bracket against the ceiling or wall and make a mark

inside each hole where you will drill your mounting hole. To

install on the wall, ensure that the round portions of the holes

are vertical. Put the Alarm where it won’t get covered with dust

while you drill the holes.

3. Use a 3/16" (5mm) drill bit to drill through the marks you made

for the mounting holes.

Mounting Hole Sets

4. Insert the plastic screw anchors (in the plastic bag with the screws) into the holes. Tap the screw

anchors gently with a hammer, if necessary, until they are ush with the ceiling or wall.

5. Insert the screws but do not tighten completely. Leave them about 1/8” (3mm) away from the wall.

6. Position the base of the Smoke Alarm over the mounting bracket and turn. The Alarm can be

positioned over the bracket every 120°. Turn the Smoke Alarm clockwise (right) until the unit is in

place. Battery will activate when attached to the mounting bracket.

7. Test the Smoke Alarm. See “Weekly Testing.”

Action What You Will See & Hear

Normal Operations

Horn: Power LED: Silent; Flashes Green every minute;

Smoke/CO LED: Off

When You Test the Alarm

Horn: 3 beeps, pause, 3 beeps, followed by,

4 beeps, pause, 4 beeps; Power LED: Off;

Smoke/CO LED: Flashes Red in sync with horn.

If Battery Becomes Low

Horn: Chirps 5 times every minute; Flashes Power LED:

Green 1 time every minute; OffSmoke/CO LED:

If Alarm is Not

Operating Properly

(MALFUNCTION SIGNAL)

Horn: Power LED: 3 chirps every minute; 3

Green Flashes approximately once a minute;

Smoke/CO LED: Off

Alarm has reached

its End of Life

Horn: Power LED: 5 chirps every minute; 5

Green Flashes approximately once a minute;

Smoke/CO LED: Off

Smoke is Detected

Horn: 3 beeps, pause, repeating; Off; Power LED:

Smoke/CO LED: Flashes Red in sync with

the horn pattern.

Smoke Alarm is Silenced

Horn: Power LED: Off (for up to 15 minutes); Off;

Smoke/CO LED: Flashes Red

Alarm Levels of CO

are Detected

Horn: 4 fast beeps, pause, repeating;

Power LED: Smoke/CO LED: Off; Flashes Red in

sync with the horn pattern.

CO Alarm is Silenced

Horn: Power LED: Off (for up to 6 minutes); Off;

Smoke/CO LED: Flashes Red

ALARM FEATURES

• Add protection in minutesEasy Installation:

• Or low battery chirps for the life of the Alarm.No Battery Replacements:

• Lets you know when it’s time to replace.End of Life Warning:

OPTIONAL LOCKING FEATURE

The optional locking feature is designed to prevent unauthorized removal of the Alarm. It is

not necessary to activate the lock in single-family households where unauthorized Alarm

removal is not a concern.

Tools you will need: Needle-nose pliers or utility

knife, standard athead screwdriver

The feature uses a locking pin which is molded

into the mounting bracket. Remove locking pin by

using needle-nose pliers or a utility knife.

Locking Pin

IMPORTANT!

To permanently remove the locking pin, insert a athead screwdriver between the

locking pin and the lock and pry the pin out of the lock.

TO LOCK THE MOUNTING BRACKET

1. Using needle-nose

pliers, detach one

locking pin from

mounting bracket.

2. Insert the locking

pin into the lock.

3. When you attach the

Alarm to the mounting

bracket, the locking

pin’s head will t into a

notch on the bracket.

TO UNLOCK THE MOUNTING BRACKET

1. Insert a athead screwdriver

between the mounting bracket

pin and the mounting bracket.

2. Pry the Alarm away from

the bracket by turning both

the screwdriver and the

Alarm counterclockwise (left)

at the same time.

TO PERMANENTLY DEACTIVATE THE SMOKE/CO ALARM

! WARNING!

Alarm is sealed. The powercell is not replaceable. Once it reaches the end of its service life, or

after 10 years—whichever comes rst—you must install a new Smoke/CO Alarm.

After 10 years or after the “low power warning” sounds (whichever comes rst):

1. Once you deactivate this unit, it will not detect smoke or carbon monoxide, or alarm. It cannot be

reactivated. You must install a new unit to continue your protection. Alarm will resist mounting to

the bracket after deactivation.

2. Use a athead screwdriver to score label

along dotted line.

3. Use thumb to pull deactivation tab outward until tab

snaps into place. This will discharge the powercell

and deactivate the unit.

4. Install a new Smoke/CO Alarm immediately!

TESTING & MAINTENANCE

WEEKLY TESTING

! WARNING!

• use an open ame of any kind to test this unit. You might accidentally damage or set re NEVER

to the unit or to your home. use vehicle exhaust! Exhaust may cause permanent damage NEVER

and voids your warranty.

• stand close to the Alarm when the horn is sounding. Exposure at close range may be DO NOT

harmful to your hearing. When testing, step away when horn starts sounding.

! CAUTION!

It is important to test this unit every week to make sure it is working properly. Using the test

button is the recommended way to test this Smoke/CO Alarm.

1. Push and release the Test/Silence button on the cover until you hear a “chirp.” The “chirp” marks

the start of the self-test sequence.

2. During testing, you will hear a loud, repeating horn pattern: 3 beeps, pause, 3 beeps, pause, while

the red smoke LED ashes. Then you will hear a loud, repeating horn pattern: 4 beeps, pause, 4

beeps, pause, while the red CO LED ashes.

If the Smoke/CO Alarm does not test properly:

1. Make sure the battery installed correctly.

2. Be sure the Alarm is clean and dust-free.

3. Test the unit again.

If the Smoke/CO Alarm is still not working properly, replace it immediately. Refer to the

“Limited Warranty” at the end of this manual.

! WARNING!

If there is still a problem, do not try to x the Alarm yourself. This will void your warranty!

REGULAR MAINTENANCE

This unit has been designed to be as maintenance-free as possible, but there are a few simple things

you must do to keep it working properly:

• Test it at least once a week.

• Clean the Smoke/CO Alarm at least once a month; gently vacuum the outside of the Smoke/CO

Alarm using your household vacuum’s soft brush attachment. Test the Smoke/CO Alarm. Never use

water, cleaners or solvents since they may damage the unit.

• If the Smoke/CO Alarm becomes contaminated by excessive dirt, dust and/or grime, and cannot be

cleaned to avoid unwanted Alarms, replace the unit immediately.

• If the green power LED ashes 2 times every minute (horn is silent) it means that the Alarm needs

to be cleaned as indicated above. If green light continues to ash, replace Alarm.

• Relocate the unit if it sounds frequent unwanted Alarms. See “Where This Alarm Should Not Be

Installed” for details.

• Protect or cover the alarm when doing any maintenance to home i.e. sanding oors, painting,

drywall patching, etc. to prevent contamination.

! WARNING!

DO NOT spray cleaning chemicals or insect sprays directly on our near the Alarm. paint over DO NOT

the Alarm. Doing so may permanently damage the Alarm.

TROUBLESHOOTING GUIDE

IF THE ALARM... PROBLEM... YOU SHOULD...

Green Power LED is OFF.

Unit will not Alarm when you

press the Test/Silence button.

Battery may be dead

or missing.

Replace Alarm

Horn “chirps” 5 times and

Green Power LED ashes 1

time every minute.

Low Battery Signal. Alarm

needs to be replaced.

Replace Alarm

Horn “chirps” and Green

Power LED ashes 3

times every minute

MALFUNCTION SIGNAL.

Device is not working

properly, and needs

to be replaced.

If unit is under warranty,

contact Consumer

Support to process a

warranty replacement.

Horn “chirps” 5 times and

Green Power LED ashes 5

times every minute

END OF LIFE SIGNAL.

Alarm needs

to be replaced.

Immediately

replace the Alarm.

Alarm goes back into

Alarm after you pressed

the Test/Silence button to

silence an Alarm.

Smoke and/or

CO levels are still

potentially dangerous.

Refer to “If Your Smoke/CO

Alarm Sounds” for details

on how to respond to an

Alarm. If anyone is feeling

ill, EVACUATE your home

immediately and call 911.

Power LED ashes Green 2

times every minute.

Alarm requires cleaning.

Clean Alarm then press

and release the test button.

See Regular Maintenance

section. If Green LED

Continues to ash, contact

Consumer Support.

CARBON MONOXIDE ALARM ONLY

CO Alarm goes back into

Alarm 4 minutes after

you Silence it.

CO levels indicate

a potentially

dangerous situation.

IF YOU ARE FEELING

SYMPTOMS OF CO

POISONING, EVACUATE your

home and call 911 or the Fire

Department. Refer to “If The

CO Alarm Sounds” for details.

CO Alarm sounds frequently

even though no high levels

of CO are revealed in

an investigation.

The CO Alarm may be

improperly located. Refer

to “Where to Install This

Alarm” for details.

Relocate your Alarm. If

frequent Alarms continue,

have home rechecked for

potential CO problems. You

may be experiencing an

intermittent CO problem.

SMOKE ALARM ONLY

Smoke Alarm sounds when

no smoke is visible.

Unwanted Alarm may be

caused by nonemergency

source like cooking smoke.

Silence Alarm using manual

button; clean the Alarm’s

cover with a soft, clean

cloth. If frequent unwanted

Alarms continue, relocate

your Alarm. Alarm may

be too close to a kitchen,

cooking appliance, or

steamy bathroom.

If you have questions that cannot be answered by reading this manual, call the

Consumer Support Team at 1-800-323-9005

FIRE SAFETY TIPS

Follow safety rules and prevent hazardous situations: 1) Use smoking materials properly. Never smoke

in bed. 2) Keep matches or lighters away from children; 3) Store ammable materials in proper

containers; 4) Keep electrical appliances in good condition and don’t overload electrical circuits;

5) Keep stoves, barbecue grills, replaces and chimneys grease- and debris-free; 6) Never leave

anything cooking on the stove unattended; 7) Keep portable heaters and open ames, like candles,

away from ammable materials; 8) Don’t let rubbish accumulate. Keep Alarms clean, and test them

weekly. Replace Alarms immediately if they are not working properly. Smoke Alarms that do not work

cannot alert you to a re. Keep at least one working re extinguisher on every level, and an additional

one in the kitchen. Have re escape ladders or other reliable means of escape from an upper level in

case stairs are blocked; 9) Have an escape plan and practice it regularly.

IF YOUR SMOKE/CO ALARM SOUNDS

WHAT TO DO FIRST: IDENTIFY THE TYPE OF ALARM SIGNAL

Refer to previous section “What You Will See And Hear With This Alarm”.

IF THE CO ALARM SOUNDS

! WARNING!

Actuation of your CO Alarm indicates the presence of carbon monoxide (CO) which can kill you. In

other words, when your CO Alarm sounds, you must not ignore it!

IF THE CO ALARM SIGNAL SOUNDS:

1. Press the Test/Silence button.

2. Call your emergency services, re department or 911. Write down the number of your local

emergency service here:

____________________________________________________________________

3. Immediately move to fresh air—outdoors or by an open door or window. Do a head count to check

that all persons are accounted for. Do not re-enter the premises, or move away from the open door

or window until the emergency services responder has arrived, the premises have been aired out,

and your CO Alarm remains in its normal condition.

4. After following steps 1-3, if your CO Alarm reactivates within a 24-hour period, repeat steps

1-3 and call a qualied appliance technician to investigate for sources of CO from fuel-burning

equipment and appliances, and inspect for proper operation of this equipment. If problems are

identied during this inspection have the equipment serviced immediately. Note any combustion

equipment not inspected by the technician, and consult the manufacturers’ instructions, or contact

the manufacturers directly, for more information about CO safety and this equipment. Make sure

that motor vehicles are not, and have not, been operating in an attached garage or adjacent to the

residence. Write down the number of a qualied appliance technician here:

____________________________________________________________________

NOTE: A qualied appliance technician is dened as “a person, rm, corporation, or company that

either in person or through a representative, is engaged in and responsible for the installation, testing,

servicing, or replacement of heating, ventilation, air conditioning (HVAC) equipment, combustion

appliances and equipment, and/or gas replaces or other decorative combustion equipment.”

IF THE SMOKE ALARM SOUNDS

RESPONDING TO AN ALARM

! WARNING!

• If the unit Alarms and you are not testing the unit, it is warning you of a potentially dangerous

situation that requires your immediate attention. ignore any Alarm. Ignoring the Alarm may NEVER

result in injury or death.

• Never remove the batteries from a battery operated Smoke/CO Alarm to stop an unwanted Alarm

(caused by cooking smoke, etc.). Removing batteries disables the Alarm so it cannot sense smoke,

and removes your protection. Instead open a window or fan the smoke away from the unit. The

Alarm will reset automatically.

• If the unit Alarms get everyone out of the house immediately.

WHAT TO DO IN CASE OF FIRE

• Don’t panic; stay calm. Follow your family escape plan.

• Get out of the house as quickly as possible. Don’t stop to get dressed or collect anything.

• Feel doors with the back of your hand before opening them. If a door is cool, open it slowly. Don’t

open a hot door. Keep doors and windows closed, unless you must escape through them.

• Cover your nose and mouth with a cloth (preferably damp). Take short, shallow breaths.

• Meet at your planned meeting place outside your home, and do a head count to make sure

everybody got out safely.

• Call the Fire Department as soon as possible from outside. Give your address, then your name.

• Never go back inside a burning building for any reason.

• Contact your Fire Department for ideas on making your home safer.

! WARNING!

Alarms have various limitations. See “General Limitations of Smoke/CO Alarms” for details.

USING THE SILENCE FEATURES

! WARNING!

The Silence Feature does not disable the unit—it makes it temporarily less sensitive to smoke. For

your safety, if smoke around the unit is dense enough to suggest a potentially dangerous situation,

the unit will stay in Alarm or may re-Alarm quickly. If you do not know the source of the smoke, do

not assume it is an unwanted Alarm. Not responding to an Alarm can result in property loss, injury,

or death. If the unit will not silence and no heavy smoke is present, or if it stays in silence mode

continuously, it should be replaced immediately.

Never remove the batteries to quiet an unwanted Alarm. Removing the batteries disables the

Alarm and removes your protection.

• The Silence Feature is intended to temporarily silence the horn while you identify and correct the

problem. Do not use the Silence Feature in emergency situations. It will not correct a CO problem

or extinguish a re.

• The Silence Feature can temporarily quiet an unwanted Alarm for several minutes. You can silence

this Smoke/CO Alarm by pressing the Test/Silence button on the Alarm cover.

Activate the Alarm test, reset or silence function by use of a nger or thumb. Use of any other

instrument is strictly prohibited.

When the Smoke Alarm is Silenced When the CO Alarm is Silenced

The Smoke Alarm will remain silent

for up to 15 minutes, then returns to

normal operation.

If the smoke has not cleared–or continues to

increase–the device will go back into Alarm.

The CO Alarm will remain silent for

up to 6 minutes.

After 6 minutes, if CO levels remain

potentially dangerous the horn will start

sounding again.

SILENCING THE END OF LIFE SIGNAL

This Silence Feature can temporarily quiet the End of Life warning “chirp” for up to 2 days. You

can silence the End of Life warning “chirp” by pressing the Test/Silence button. The horn will chirp,

acknowledging that the End of Life Silence Feature has been activated.

After approximately 2 days, the End of Life “chirp” will resume. The timer shall not be able to be reset

after 14 days following the initial end-of-life signal.

WHAT YOU NEED TO KNOW ABOUT CO

WHAT IS CO?

CO is an invisible, odorless, tasteless gas produced when fossil fuels do not burn completely, or are

exposed to heat (usually re). Electrical appliances typically do not produce CO.

These fuels include: Wood, coal, charcoal, oil, natural gas, gasoline, kerosene, and propane.

Common appliances are often sources of CO. If they are not properly maintained, are improperly

ventilated, or malfunction, CO levels can rise quickly. CO is a real danger now that homes are more

energy efcient. “Air-tight” homes with added insulation, sealed windows, and other weatherproong

can “trap” CO inside.

SYMPTOMS OF CO POISONING

These symptoms are related to CO POISONING and should be discussed with ALL household members.

Mild Exposure: Slight headache, nausea, vomiting, fatigue (“u-like” symptoms).

Medium Exposure: Throbbing headache, drowsiness, confusion, fast heart rate.

Extreme Exposure: Convulsions, unconsciousness, heart and lung failure. Exposure to carbon

monoxide can cause brain damage, death.

IMPORTANT!

This CO Alarm measures exposure to CO over time. It Alarms if CO levels are extremely high in a

short period of time, or if CO levels reach a certain minimum over a long period of time. The CO

Alarm generally sounds an Alarm before the onset of symptoms in average, healthy adults. Why is

this important? Because you need to be warned of a potential CO problem while you can still react in

time. In many reported cases of CO exposure, victims may be aware that they are not feeling well, but

become disoriented and can no longer react well enough to exit the building or get help. Also, young

children and pets may be the rst affected. The average healthy adult might not feel any symptoms

when the CO Alarm sounds. However, people with cardiac or respiratory problems, infants, unborn

babies, pregnant mothers, or elderly people can be more quickly and severely affected by CO. If you

experience even mild symptoms of CO poisoning, consult your doctor immediately!

FINDING THE SOURCE OF CO AFTER AN ALARM

Carbon monoxide is an odorless, invisible gas, which often makes it difcult to locate the source of CO

after an Alarm. These are a few of the factors that can make it difcult to locate sources of CO:

• House well ventilated before the investigator arrives.

• Problem caused by “backdrafting.”

• Transient CO problem caused by special circumstances.

Because CO may dissipate by the time an investigator arrives, it may be difcult to locate the

source of CO. First Alert shall not be obligated to pay for any carbon monoxide investigation

or service call.

POTENTIAL SOURCES OF CO IN THE HOME

Fuel-burning appliances like:

portable heater, gas or wood

burning replace, gas kitchen range

or cooktop, gas clothes dryer.

Damaged or insufcient venting:

corroded or disconnected water

heater vent pipe, leaking chimney

pipe or ue, or cracked heat

exchanger, blocked or clogged

chimney opening.

Improper use of appliance/

device: operating a barbecue grill

or vehicle in an enclosed area (like

a garage or screened porch).

Transient CO problems: “transient” or on-again-off-again CO problems can be caused by outdoor

conditions and other special circumstances.

The following conditions can result in transient CO situations:

1. Excessive spillage or reverse venting of fuel appliances caused by outdoor conditions such as:

Wind direction and/or velocity, including high, gusty winds. Heavy air in the vent pipes (cold/humid air

with extended periods between cycles).

• Negative pressure differential resulting from the use of exhaust fans.

• Several appliances running at the same time competing for limited fresh air.

• Vent pipe connections vibrating loose from clothes dryers, furnaces, or water heaters.

• Obstructions in or unconventional vent pipe designs which can amplify the above situations.

2. Extended operation of unvented fuel burning devices (range, oven, replace).

3. Temperature inversions, which can trap exhaust close to the ground.

4. Car idling in an open or closed attached garage, or near a home.

These conditions are dangerous because they can trap exhaust in your home. Since these

conditions can come and go, they are also hard to recreate during a CO investigation.

HOW CAN I PROTECT MY FAMILY FROM

CO POISONING

A CO Alarm is an excellent means of protection. It monitors the air and sounds a loud Alarm before

carbon monoxide levels become threatening for average, healthy adults. A CO Alarm is not a substitute

for proper maintenance of home appliances.

TO HELP PREVENT CO PROBLEMS AND REDUCE THE RISK OF CO POISONING:

• Clean chimneys and ues yearly. Keep them free of debris, leaves, and nests for proper air ow.

Also, have a professional check for rust and corrosion, cracks, or separations. These conditions

can prevent proper air movement and cause backdrafting. Never “cap” or cover a chimney in any

way that would block air ow.

• Test and maintain all fuel-burning equipment annually. Many local gas or oil companies and HVAC

companies offer appliance inspections for a nominal fee.

• Make regular visual inspections of all fuel-burning appliances. Check appliances for excessive rust

and scaling. Also check the ame on the burner and pilot lights. The ame should be blue. A yellow

ame means fuel is not being burned completely and CO may be present. Keep the blower door

on the furnace closed. Use vents or fans when they are available on all fuel-burning appliances.

Make sure appliances are vented to the outside. Do not grill or barbecue indoors, or in garages or

on screen porches.

• Check for exhaust backow from CO sources. Check the draft hood on an operating furnace for a

backdraft. Look for cracks on furnace heat exchangers.

• Check the house or garage on the other side of shared wall.

• Keep windows and doors open slightly. If you suspect that CO is escaping into your home, open a

window or a door. Opening windows and doors can signicantly decrease CO levels.

In addition, familiarize yourself with all enclosed materials. Read this manual in its entirety, and make

sure you understand what to do if your CO Alarm sounds.

REGULATORY INFORMATION

FOR SMOKE ALARMS

RECOMMENDED LOCATIONS FOR SMOKE ALARMS

INSTALLING SMOKE ALARMS IN SINGLE-FAMILY RESIDENCES

The National Fire Protection Association (NFPA), recommends one Smoke Alarm on every oor, in every

sleeping area, and in every bedroom. In new construction, the Smoke Alarms must be AC powered and

interconnected. See “Agency Placement Recommendations” for details. For additional coverage, it is

recommended that you install a Smoke Alarm in all rooms, halls, storage areas, nished attics, and

basements, where temperatures normally remain between 40˚ F (4.4˚ C) and 100˚ F (37.8˚ C). Make

sure no door or other obstruction could keep smoke from reaching the Smoke Alarms.

MORE SPECIFICALLY, INSTALL SMOKE ALARMS:

• On every level of your home, including nished attics and basements.

• Inside every bedroom, especially if people sleep with doors closed.

• In the hall near every sleeping area. If your home has multiple sleeping areas, install a unit in each.

• If a hall is over 40 feet (12 meters) long, install an Alarm at each end.

• At the top of the rst-to-second level stairway, and at bottom of basement stairway.

IMPORTANT!

Specic requirements for Smoke Alarm installation vary from state to state and from region to region.

Check with your local Fire Department for current requirements in your area. It is recommended AC

or AC/DC units be interconnected for added protection.

HARDWIREDBATTERY OPERATED & WIRELESS

MULTI-STORY RESIDENCE

1-STORY RESIDENCE

Wireless Alarms

Wireless Interconnected Alarms

Hardwired Interconnected

AC or AC/DC Alarms

Smoke Alarms

CO Alarms

Both OR Combination

Smoke/CO Alarms

REGULATORY INFORMATION FOR CO ALARMS

WHAT LEVELS OF CO CAUSE AN ALARM?

Underwriters Laboratories Inc. Standard UL2034 requires residential CO Alarms to sound when

exposed to levels of CO and exposure times as described below. They are measured in parts per

million (ppm) of CO over time (in minutes).

UL2034 Required Alarm Points*:

• If the Alarm is exposed to 400 ppm of CO, IT MUST ALARM BETWEEN 4 and 15 MINUTES.

• If the Alarm is exposed to 150 ppm of CO, IT MUST ALARM BETWEEN 10 and 50 MINUTES.

• If the Alarm is exposed to 70 ppm if CO, IT MUST ALARM BETWEEN 60 and 240 MINUTES.

* Approximately 10% COHb exposure at levels of 10% to 95% Relative Humidity (RH).

The unit is designed not to Alarm when exposed to a constant level of 30 ppm for 30 days.

IMPORTANT!

CO Alarms are designed to Alarm before there is an immediate life threat. Since you cannot see or

smell CO, never assume it’s not present.

• An exposure to 100 ppm of CO for 20 minutes may not affect average, healthy adults, but after 4

hours the same level may cause headaches.

• An exposure to 400 ppm of CO may cause headaches in average, healthy adults after 35 minutes,

but can cause death after 2 hours.

Standards: Underwriters Laboratories Inc. Single and Multiple Station Carbon

Monoxide Alarms UL2034.

According to Underwriters Laboratories Inc. UL2034, Section 1-1. 2: “Carbon monoxide Alarms covered

by these requirements are intended to respond to the presence of carbon monoxide from sources

such as, but not limited to, exhaust from internal-combustion engines, abnormal operation of fuel-red

appliances, and replaces. CO Alarms are intended to Alarm at carbon monoxide levels below those

that could cause a loss of ability to react to the dangers of carbon monoxide exposure. ” This CO Alarm

monitors the air at the Alarm, and is designed to Alarm before CO levels become life threatening. This

allows you precious time to leave the house and correct the problem. This is only possible if Alarms

are located, installed, and maintained as described in this manual.

Gas Detection at Typical Temperature and Humidity Ranges: The CO Alarm is not formulated to

detect CO levels below 30 ppm typically. UL tested for false Alarm resistance to Methane (500 ppm),

Butane (300 ppm), Heptane (500 ppm), Ethyl Acetate (200 ppm), Isopropyl Alcohol (200 ppm) and

Carbon Dioxide (5000 ppm). Values measure gas and vapor concentrations in parts per million.

Audible Alarm: 85 dB minimum at 10 feet (3 meters).

AGENCY PLACEMENT RECOMMENDATIONS

Standards: Underwriters Laboratories Inc. Single and Multiple Station Smoke Alarms 217.

NFPA 72 CHAPTER 29 “FOR YOUR INFORMATION, THE NATIONAL FIRE ALARM AND SIGNALING

CODE, NFPA 72, READS AS FOLLOWS:”

29.5.1* Required Detection.

29.5.1.1* Where required by other governing laws, codes, or standards for a specic type of

occupancy, approved single and multiple-station Smoke Alarms shall be installed as follows:

1. *In all sleeping rooms and guest rooms

2. *Outside of each separate dwelling unit sleeping area, within 21 ft (6.4 m) of any door to a

sleeping room, with the distance measured along a path of travel

3. On every level of a dwelling unit, including basements

4. On every level of a residential board and care occupancy (small facility), including basements and

excluding crawl spaces and unnished attics

5. *In the living area(s) of a guest suite

6. In the living area(s) of a residential board and care occupancy (small facility)

(Reprinted with permission from NFPA 72

National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete

and ofcial position of the National Fire Protection Association, on the referenced subject which is

represented only by the standard in its entirety).

(National Fire Alarm and Signaling Code

and NFPA 72

are registered trademarks of the National Fire

Protection Association, Inc., Quincy, MA 02269).

CALIFORNIA STATE FIRE MARSHAL (CSFM)

Early warning detection is best achieved by the installation of re detection equipment in all rooms

and areas of the household as follows: A Smoke Alarm installed in each separate sleeping area (in

the vicinity, but outside bedrooms), and Heat or Smoke Alarms in the living rooms, dining rooms,

bedrooms, kitchens, hallways, nished attics, furnace rooms, closets, utility and storage rooms,

basements, and attached garages.

SPECIAL COMPLIANCE CONSIDERATIONS

This Smoke Alarm is suitable for use in apartments, condominiums, townhouses, hospitals, day care

facilities, health care facilities, boarding houses, group homes and dormitories provided a primary re

detection system already exists to meet re detection requirements in common areas like lobbies,

hallways, or porches. Using this Smoke Alarm in common areas may not provide sufcient warning to

all residents or meet local re protection ordinances/regulations.

This Smoke Alarm alone is not a suitable substitute for complete re detection systems in places

housing many people—like apartment buildings, condominiums, hotels, motels, dormitories, hospitals,

health care facilities, nursing homes, day care facilities, or group homes of any kind. It is not a

suitable substitute for complete re detection systems in warehouses, industrial facilities, commercial

buildings, and special-purpose non-residential buildings which require special re detection and Alarm

systems. Depending on the building codes in your area, this Smoke Alarm may be used to provide

additional protection in these facilities.

In new construction, most building codes require the use of AC or AC/DC powered Smoke Alarms only.

In existing construction, AC, AC/DC, or DC powered Smoke Alarms can be used as specied by local

building codes. THIS EQUIPMENT SHOULD BE INSTALLED IN ACCORDANCE WITH THE NATIONAL FIRE

PROTECTION ASSOCIATION’S STANDARD 72 (National Fire Protection Association, Batterymarch Park,

Quincy, MA 02269). Refer to NFPA 101 (Life Safety Code), local building codes, or consult your Fire

Department for detailed re protection requirements in buildings not dened as “households”.

FCC COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that of the receiver.

• Consult the dealer or an experienced radio or TV technician for help.

! WARNING!

Changes or modications to the product, not expressly approved by First Alert, could void the user’s

authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

GENERAL LIMITATIONS OF

SMOKE/CO ALARMS

This Smoke/CO Alarm is intended for residential use. This product is intended for use in ordinary

indoor locations of family living units. It is not designed to measure CO levels in compliance with

Occupational Safety and Health Administration (OSHA) commercial or industrial standards. Individuals

with medical conditions that may make them more sensitive to carbon monoxide may consider

using warning devices which provide audible and visual signals for carbon monoxide concentrations

under 30 ppm. For additional information on carbon monoxide and your medical condition contact

your physician.

Smoke/CO Alarms may not waken all individuals. Practice the escape plan at least twice a year,

making sure that everyone is involved – from kids to grandparents. Allow children to master re

escape planning and practice before holding a re drill at night when they are sleeping. If children

or others do not readily waken to the sound of the Smoke/CO Alarm, or if there are infants or family

members with mobility limitations, make sure that someone is assigned to assist them in re drill and

in the event of an emergency. It is recommended that you hold a re drill while family members are

sleeping in order to determine their response to the sound of the Smoke/CO Alarm while sleeping and

to determine whether they may need assistance in the event of an emergency.

Smoke/CO Alarms cannot work without power. Battery operated units cannot work if the batteries

are missing, disconnected or dead, if the wrong type of batteries are used, or if the batteries are not

installed correctly. AC units cannot work if the AC power is cut off for any reason (open fuse or circuit

breaker, failure along a power line or at a power station, electrical re that burns the electrical wires,

etc.). If you are concerned about the limitations of battery or AC power, install both types of units.

This Smoke/CO Alarm will not sense smoke or CO that does not reach the sensors. It will

only sense smoke or CO at the sensor. Smoke or CO may be present in other areas. Doors or other

obstructions may affect the rate at which CO or smoke reaches the sensors. If bedroom doors are

usually closed at night, we recommend you install an Alarm device (Combination CO and Smoke Alarm,

or separate CO Alarms and Smoke Alarms) in each bedroom and in the hallway between them.

This Smoke/CO Alarm may not sense smoke or CO on another level of the home. Example:

This Alarm device, installed on the second oor, may not sense smoke or CO in the basement.

For this reason, one Alarm device may not give adequate early warning. Recommended minimum

protection is one Alarm device in every sleeping area, every bedroom, and on every level of your

home. Some experts recommend battery powered smoke and CO Alarms be used in conjunction with

interconnected AC powered Smoke Alarms. For details, see “About Smoke Alarms” for details.

Smoke/CO Alarms may not be heard. The Alarm horn loudness meets or exceeds current UL

standards of 85 dB at 10 feet (3 meters). However, if the Smoke/CO Alarm is installed outside the

bedroom, it may not wake up a sound sleeper or one who has recently used drugs or has been

drinking alcoholic beverages. This is especially true if the door is closed or only partly open. Even

persons who are awake may not hear the Alarm horn if the sound is blocked by distance or closed

doors. Noise from trafc, stereo, radio, television, air conditioner, or other appliances may also prevent

alert persons from hearing the Alarm horn. This Smoke/CO Alarm is not intended for people who are

hearing impaired.

The Alarm may not have time to Alarm before the re itself causes damage, injury, or death,

since smoke from some res may not reach the unit immediately. Examples of this include

persons smoking in bed, children playing with matches, when a person’s clothing catches re

while cooking, res caused by violent explosions resulting from escaping gas, or incendiary

res where the re grows so rapidly that an occupant’s egress is blocked even with properly

located Smoke Alarms.

This Smoke/CO Alarm is not a substitute for life insurance. Though this Smoke/CO Alarm warns

against increasing CO levels or the presence of smoke, First Alert does not warrant or imply in any way

that they will protect lives. Homeowners and renters must still insure their lives.

This Smoke/CO Alarm has a limited life. Although this Smoke/CO Alarm and all of its parts have

passed many stringent tests and are designed to be as reliable as possible, any of these parts could

fail at any time. Therefore, you must test this device weekly. The unit should be replaced immediately

if it is not operating properly.

This Smoke/CO Alarm is not foolproof. Like all other electronic devices, this Smoke/CO Alarm has

limitations. It can only detect smoke or CO that reaches the sensors. It may not give early warning of

the source of smoke or CO is in a remote part of the home, away from the Alarm device.

LIMITED WARRANTY

First Alert

warrants that for a period of ten years from the date of purchase, this product will be free

from defects in material and workmanship. First Alert, at its option, will repair or replace this product

or any component of the product found to be defective during the warranty period. Replacement

will be made with a new or remanufactured product or component. If the product is no longer

available, replacement may be made with a similar product of equal or greater value. This is your

exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is

not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty

performance. First Alert dealers, service centers, or retail stores selling First Alert products do not have

the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following:

negligent use or misuse of the product, use on improper voltage or current, use contrary to the

operating instructions, disassembly, repair or alteration by anyone other than First Alert or an

authorized service center. Further, the warranty does not cover Acts of God, such as re, ood,

hurricanes and tornadoes.

Specyfikacje produktu

Marka:	First Alert
Kategoria:	czujnik dymu
Model:	SMICO110

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z First Alert SMICO110, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje czujnik dymu First Alert

First Alert SMICO105-AC Instrukcja

24 Lutego 2025

First Alert SMICO110 Instrukcja

24 Lutego 2025

First Alert SMCO210 Instrukcja

27 Lipca 2024

First Alert SMCO210V Instrukcja

27 Lipca 2024

First Alert SMCO100V-AC Instrukcja

27 Lipca 2024

First Alert SMICO100-AC Instrukcja

27 Lipca 2024

First Alert 7010B Instrukcja

28 Maja 2024

First Alert SC07 Instrukcja

22 Maja 2024

First Alert HA300 Instrukcja

20 Maja 2024

First Alert SA900 Instrukcja

18 Maja 2024

Instrukcje czujnik dymu

Najnowsze instrukcje dla czujnik dymu

Elro FS9010 Instrukcja

2 Kwietnia 2025

Hochiki SOC-24V Instrukcja

26 Lutego 2025

Hochiki ALN-V Instrukcja

26 Lutego 2025

Hochiki ACC-V Instrukcja

26 Lutego 2025

Hochiki HCA-4 Instrukcja

26 Lutego 2025

Drayton CCT599002 Instrukcja

20 Lutego 2025

Alecto COA-26 Instrukcja

4 Października 2024

Alecto SA-100 Instrukcja

4 Października 2024

X-Sense XC01 Instrukcja

28 Września 2024

Siemens DELTA reflex SD230N Instrukcja

23 Września 2024