Instrukcja obsługi Flir FB-324-O

Flir Kamera monitorująca FB-324-O

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Flir FB-324-O (35 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.1 gwiazdek

Pobierz PDF

Strona 1/35

User and

Installation

Guide

FB-Series

FB-Series O

copied, photocopied, translated, or transmitted to any electronic medium or machine readable form without the

prior written permission of FLIR Systems, Inc.

Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR

Systems, Inc. and/or its subsidiaries. All other trademarks, trade names, or company names referenced herein are

used for identification only and are the property of their respective owners.

This product is protected by patents, design patents, patents pending, or design patents pending.

The contents of this document are subject to change without notice.

For additional information visit www.flir.com or write to FLIR Systems, Inc.

FLIR Systems, Inc.

6769 Hollister Avenue

Goleta, CA 93117

Support: http://www.flir.com/security/display/?id=71083.

Important Instructions and Notices to the User:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Modification of this device without the express authorization of FLIR Systems, Inc. may void the user’s authority

under FCC rules to operate this device.

Note 1: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at the user’s own expense.

Note 2: If this equipment came with shielded cables, it was tested for compliance with the FCC limits for a Class A

digital device using shielded cables and therefore shielded cables must be used with the device

Industry Canada Notice:

This Class A digital apparatus complies with Canadian ICES-003.

Avis d’Industrie Canada:

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Proper Disposal of Electrical and Electronic Equipment (EEE)

The European Union (EU) has enacted Waste Electrical and Electronic Equipment Directive 2002/

96/EC (WEEE), which aims to prevent EEE waste from arising; to encourage reuse, recycling, and

recovery of EEE waste; and to promote environmental responsibility.

In accordance with these regulations, all EEE products labeled with the “crossed out wheeled bin”

either on the product itself or in the product literature must not be disposed of in regular rubbish bins,

mixed with regular household or other commercia regular municipal waste l waste, or by other

collection means. Instead, and in order to prevent possible harm to the environment or human

health, all EEE products (including any cables that came with the product) should be responsibly

discarded or recycled.

To identify a responsible disposal method nearby, please contact the local waste collection or recycling service, the

original place of purchase or product supplier, or the responsible government authority in the area. Business users

should contact their supplier or refer to their purchase contract.

Document History

Version Date Comment

100 August 2017 Initial Release

427-0064-00-12, Version 100 August 2017 3

Table of Contents

Camera Installation

1.1 Warnings and Cautions ............................................................................................... 5

1.2 References .................................................................................................................. 5

1.3 Installation Overview ................................................................................................... 6

1.3.1 Camera Connection Options .............................................................................. 6

1.3.2 Supplied Components ........................................................................................ 6

1.3.3 Additional Supplies ............................................................................................. 6

1.3.4 Mounting Accessories ........................................................................................ 7

1.3.5 Site Preparation .................................................................................................. 7

1.3.6 Camera Placement ............................................................................................. 8

1.3.7 Camera Mounting ............................................................................................... 9

1.4 Camera Connections ................................................................................................... 9

1.4.1 Bench Testing .................................................................................................. 10

1.4.2 Analog Video Connections ............................................................................... 10

1.4.3 Connecting Power ............................................................................................ 10

1.4.4 Alarm Connections—Not supported ................................................................. 11

1.4.5 Ethernet ............................................................................................................ 11

1.4.6 Camera Grounding ........................................................................................... 11

1.5 Mounting the Camera ................................................................................................ 11

1.6 Camera specifications ............................................................................................... 12

Basic Operation and Configuration

2.1 IP Camera, ONVIF Profile S Compliant .................................................................... 13

2.2 Set IP Address using the FLIR Discovery Network Assistant (DNA) ........................ 14

2.3 Camera Bench Test .................................................................................................. 15

2.3.1 Log in to the Camera Web Page ...................................................................... 15

2.3.2 Live Video Page ............................................................................................... 16

2.4 Basic Camera Configuration ..................................................................................... 18

2.4.1 Setup Menu ...................................................................................................... 18

2.4.2 Server Menu ..................................................................................................... 18

2.5 Thermal Imaging Overview ....................................................................................... 23

2.6 Maintenance and Troubleshooting Tips .................................................................... 23

Specyfikacje produktu

Marka:	Flir
Kategoria:	Kamera monitorująca
Model:	FB-324-O
Kolor produktu:	Biały
Rodzaj zasilania:	AC, DC, PoE
Napięcie wejściowe AC:	24 V
Wysokość produktu:	94 mm
Szerokość produktu:	96 mm
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Certyfikaty:	FCC Part 15 (Subpart B, Class A), CE, EN55032, EN55024, WEEE
Maksymalne zużycie mocy:	17 W
Liczba kamer:	1
Formaty kompresji:	H.264, M-JPEG
Przeznaczenie:	Wewnętrz i na wolnym powietrzu
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	-40 - 50 °C
Zakres wilgotności względnej:	10 - 90 %
Układ:	Pocisk
Wi-Fi:	Nie
Przewodowa sieć LAN:	Tak
Zakres temperatur (przechowywanie):	-20 - 70 °C
Model:	Kamera bezpieczeństwa IP
Technologia okablowania:	10/100Base-T(X)
Maks. rozdzielczość:	320 x 240 px
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet
Stopień ochrony IP:	IP66
Typ mocowania:	Ściana
Obsługiwane protokoły sieciowe:	IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, ICMP, IGMP, DHCP, ARP
Obsługiwane rozdzielczości grafiki:	320 x 240
Długość stałej ogniskowej:	12.8 mm
Regulowanie jakości:	Brightness, Contrast, Sharpness
Kąt pola widzenia (FOV):	24 °
Min. Oświetlenie:	- lx
System formatu sygnału analogowego:	NTSC, PAL
Długość produktu:	285 mm
Wbudowany HDD:	Nie
Maksymalna przesłona:	1
Wyjście prądu stałego (w woltach):	12
Cechy zabiezpieczeń:	Dust resistant, Splash proof
Efektywna rozdzielczość aparatu:	76800 px
Automatyczna regulacja wzmocnienia (ARW):	Tak
Zużycie prądu (przesył prądu przez Ethernet (PoE)):	13 W
Rozdzielczości PAL:	320 x 240 px
Rozdzielczości NTSC:	320 x 240 px