Instrukcja obsługi Funai Catalyst 48

Funai Piloty zdalnego sterowania Catalyst 48

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Funai Catalyst 48 (15 stron) w kategorii Piloty zdalnego sterowania. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 8 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/15

INTRODUCTION

The Catalyst™ 48 Universal Remote

Control,developed by Universal

Electronics,Inc. for Funai,is the complete

solution for all of your remote control

requirements. It is designed to operate

from four to eight devices with the

emphasis on features and functions of

your dedicated component(s).

The Catalyst 48 requires two (2) fresh

AA alkaline batteries (not included)

and some easy programming to control

your devices. For best results, please

read and perform all instructions listed

here. Also, keep these instructions for

future reference.

FEATURES AND FUNCTIONS

Use the Key Charts to learn how the

Catalyst 48 functions.

Key Charts

The LED (red light)

blinks to show that

the remote control is

working and is

sending signals.

Use SETUP for all

programming

sequences.

Press PWR once to

turn on or off the

selected home enter-

tainment component.

Press AUX,CBL VCR, ,

TV,SAT,CD,AMP, or

TNR once to select a

home entertainment

component to control.

Use the keypad (0 ~ 9)

to directly select

channels (for example,

09 or 31).

Press MUTE once to

turn sound off

or on.

Press ENTER once after

entering channel

numbers on some TV

models.

Use VOL + (or VOL-)

to raise (or lower) the

sound volume.

Use (or CH + CH -) to

select the next higher

(or lower) channel.

Press LAST once to

recall the last channel

and to page back one

screen in the

main menu.

Press SLEEP to activate

your TV’s sleep timer.

Or if none is available,

press SLEEP to activate

the Catalyst 48’s sleep

timer for automatic

shut-off of your TV.

Each key press (up to

four) add 15 minutes

to the sleep timer.

Press INPUT once to

switch the input of the

chosen component.

Use GUIDE to display

the program guide.

Use EXIT to exit out of

the selected compo-

nent’s menu or guide.

Use the cursor keys to

move the cursor in

the program guide and

menu screens.

Use SELECT to choose

options from your

selected component’s

menu or guide.

Use INFO to display

current channel and

program information.

Press MENU to access

the menu of your

chosen component.

Use the transport

keys to control

your VCR, or CD or

DVD player.

Use these keys for

specific features on

your dedicated

components.

INSTALLING BATTERIES

1. On the back of the Catalyst 48,push

the tab and lift off the battery cover.

2. Obtain two (2) fully-charged AA

alkaline batteries. Match the + and –

marks on the batteries to the + and

– marks in the battery case,then

insert the new batteries.

3. Press the battery cover back into

place. The tab should click when the

cover is locked.

4. Test the unit by pressing PWR and

any mode key (e.g., AUX,CBL VCR, ,

etc.).If the batteries are inserted cor-

rectly,the LED will blink once.

NOTE:When batteries need replacement,

the Catalyst 48 will blink twice with every

key press.Simply replace them and the

remote control will be restored to its full

functionality, including favorite settings.

PROGRAMMING

COMPONENT CONTROL

The Catalyst 48 can control up to eight

different components. Perform the fol-

lowing instructions for each component

you want controlled:

NOTE: For TV/VCR Combo control,see the

next section.

1. Turn on a component (e.g.,VCR)

and,if applicable, insert media,

(e.g.,cassette or disc).

NOTE: Please read steps 2-4 completely

before proceeding.We recommend

highlighting or writing down the codes

and device you wish to program before

moving onto step 2.

2. On the Catalyst 48,press a component

key once (i.e., AUX VCR,CBL, ,TV,SAT,

CD,AMP,or TNR). Press and hold

SETUP until the LED blinks twice,

then release SETUP.

3. Use the Manufacturer’s Codes (on the

back side) to locate the the type of

component and brand name and

then enter the first four-digit code

for your component. If performed

correctly,the LED will blink twice.

NOTE: If the LED did not blink twice,then

repeat steps 2 through 3 and try entering

the same code again.

4. Aim the Catalyst 48 at the component

and press PWR once.It should turn

off. If it does not respond, repeat steps

2-3, trying each code for your brand

until you find one that works. If it still

does not work,try searching for the

code (see Searching For Your Code).

NOTE: If the device does not have a PWR

key, press PLAY.

5. Repeat steps 1 through 4 for each

component you want the Catalyst 48

to control.

PROGRAMMING

TV/VCR COMBO CONTROL

Perform the following instructions to

control a TV/VCR Combo:

1. Turn on the TV/VCR Combo and

insert a video cassette.

NOTE: Please read steps 2-4 completely

before proceeding.We recommend

highlighting or writing down the code

for the brand you wish to program

before moving onto step 2.

2. On the Catalyst 48,press VCR. Press

and hold SETUP until the LED blinks

twice,then release SETUP.

3. Use the Setup Codes For TV/VCR

Combos (on the back side) to locate

the brand name and then enter the

first four-digit code for your compo-

nent.If performed correctly, the LED

will blink twice.

NOTE: If the LED did not blink twice,then

repeat steps 2 through 3 and try entering

the same code again.

4. Aim the Catalyst 48 at the component

and press PWR once.It should turn

off. If it does not respond, repeat steps

2-3, trying each code for your brand

until you find one that works. If it still

does not work,try searching for the

code (see Searching For Your Code).

NOTE: If the device does not have a PWR

key, press PLAY.

5. If you’ve located a setup code that

works,but it has a separate TV code,

you’ll also need to program it into the

Catalyst 48 to access volume control

as follows:

a. Press TV once.The LED will

blink twice.

b. Enter the TV code for your

TV/VCR Combo. If correct, the

LED will blink twice.

If there is no separate TV code listed,

you will need to perform the follow-

ing steps to access volume control:

a. Press and hold SETUP until the

LED blinks twice,then release

SETUP.

b. Enter 9 - 9 - 3 . The LED will

blink twice.

c. Press VCR once. The LED will

blink twice.

SEARCHING FOR YOUR CODE

If your device does not respond to the

Catalyst 48 after trying all codes listed

for your brand,or if your brand is not

listed at all, try searching for your code.

For example,to search for a code for

your TV:

1. On the Catalyst 48, press TV once.

2. Press and hold SETUP until the LED

blinks twice,then release SETUP.

3. Enter 9 1- 9 - . The LED will

blink twice.

4. Aim the remote control at the the

TV and slowly alternate between

pressing PWR and TV. Stop when the

TV turns off.

NOTE: In the search mode,the

Catalyst 48 will send IR codes from its

library to the selected device,starting

with the most popular code first.

5. Press SETUP once to lock in the code.

6. To search for the codes of your other

components,repeat steps 1 through

5,but substitute the appropriate key

(i.e., AUX, , , , ,CBL VCR SAT CD AMP,or

TNR) for the (Auxiliary, VCR,Cable,

Satellite,CD, Amplifier,or Tuner)

component you are searching for.

CHECKING THE CODES

If you have set up the Catalyst 48 using

the Searching For Your Code procedure,

you may need to find out which four-

digit code is operating your equipment:

For example,to find out which code is

operating your TV:

1. On the Catalyst 48, press TV once.

2. Press and hold SETUP until the LED

blinks twice,then release SETUP.

3. Enter 9 0- 9 - . The LED will

blink twice.

4. To view the code for the first digit,

press 1 once. Wait 3 seconds, count

the LED blinks (e.g.,3 blinks = 3)

and write down the number.

NOTE: If a code digit is “0”, the LED

will not blink.

5. Repeat step 4 three more times for

remaining digits. Use 2for the sec-

ond digit,3for the third digit,and 4

for the fourth digit.

6. To check for the codes of your other

components, repeat steps 1 through

5,but substitute the appropriate key

(i.e., AUX, , ,CBL VCR SAT,CD,AMP,or

TNR) component you are checking.

As before, write down each four-

digit code.

RE-ASSIGNING DEVICE KEYS

The Catalyst 48 can be set up to control a

second TV or VCR, or any combination of

eight home entertainment components.

For example,to have the Catalyst 48 con-

trol a TV, a Cable Converter, and two

VCRs, you will need to re-assign the

unused AUX key to operate the second

VCR as follows:

1. On the Catalyst 48,press and hold

SETUP until the LED blinks twice,

then release SETUP.

2. Enter 9 2- 9 - . The LED will

blink twice.

3. Press VCR AUX once, then press once.

4. The AUX key is now ready to be pro-

grammed for your second VCR. See

Programming Component Control.

To re-assign other device keys,repeat

steps 1 through 4 by substituting the key

sequence from the below chart for the

Specyfikacje produktu

Marka:	Funai
Kategoria:	Piloty zdalnego sterowania
Model:	Catalyst 48

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Funai Catalyst 48, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Piloty zdalnego sterowania Funai

Funai Catalyst 48 Instrukcja

15 Października 2024

Instrukcje Piloty zdalnego sterowania

Najnowsze instrukcje dla Piloty zdalnego sterowania

Technics RAK-SSA163XH Instrukcja

13 Października 2024

Technics SA-GX350 Instrukcja

13 Października 2024

Thomson ROC330 Instrukcja

13 Października 2024

Meliconi Personal 1 Instrukcja

12 Października 2024

Hama 00012086 3in1 Instrukcja

12 Października 2024

One For All URC 3550 Super Easy Instrukcja

11 Października 2024

Telefunken TRC 800 Instrukcja

10 Października 2024

Logitech Harmony Smart Control Instrukcja

10 Października 2024

Philips SRP2008B Instrukcja

9 Października 2024

Logitech Harmony 350 Instrukcja

9 Października 2024