Instrukcja obsługi GBC Pinnacle 27
GBC
System laminowania
Pinnacle 27
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GBC Pinnacle 27 (44 stron) w kategorii System laminowania. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 13 użytkowników na średnio 4.8 gwiazdek
Strona 1/44
Pinnacle 27/27 EZload
Laminator
INSTALLATION & OPERATION MANUAL
Document Number: CBT10000 Rev B
Do not duplicate without written
permission
from ACCO
Brands
ACCO Brands reserves the right to make changes to this publication and to the products described in it without
notice. All specifications and information concerning products are subject to change without notice. Reference
in this publication to information or products protected by copyright or patent does not convey any license
under the rights of ACCO Brands or others assumes no liability arising from infringements of patents or any
other rights of third parties.
This publication is copyrighted © 2016 by ACCO Brands. All rights reserved.
1. Safety
YOUR SAFETY, AS WELL AS THE SAFETY OF OTHERS IS
IMPORTANT TO GBC. IN THIS INSTRUCTION
MANUAL AND ON THE PRODUCT ARE IMPORTANT
SAFETY MESSAGES. BEFORE YOU INSTALL OR USE
THE MACHINE, READ AND FOLLOW ALL THE SAFETY
NOTICES CAREFULLY IN THIS CHAPTER.
Observe all the safety information provided.
Observe all safety warnings. Never remove safety
warnings or other information from the equipment.
Read all of the instructions and save these
instructions for further use.
The safety alert symbol precedes each safety
notice in this manual. The symbol indicates a
potential personal safety hazard to you or others, as
well as cause product damage or property damage.
This safety alert symbol indicates a potential
electrical shock. It warns you not to open the paper
cutter and expose yourself to hazardous voltage.
THE FOLLOWING WARNINGS ARE FOUND ON THE
ULTIMA 65 LAMINATOR.
This means you can be seariously hurt or killed if you
open the product and expose yourself to hazardous
voltage.
Do not open. No user servicable parts insides. Refer
servicing to qualitfied service personal.
CAUTION Hot Surface: Laminator
rollers can be in excess of 260° Fahrenheit.
Please use caution and do not touch the rollers.
Caution Moving Parts: Laminator
rollers are moving parts, please keep body parts
away from the rollers as they can be trapped
and/or crushed in rollers. Clothing, Jewelry, Long
hair and other wearables could be caught in roller
path and pull you into the
Caution Sharp Point: The laminator
trimmer has a sharp blade. Do not touch the
blade portion of the trimmer and use caution
when operating to prevent injury.
WARNING: Do not attempt to service or
repair the laminator.
WARNING: do not connect the laminator
to an electrical supply or attempt to operate the
laminator until you have completely read these
instructions. Maintain these instructions in a
convenient location for future reference.
General safeguards
• Use this laminator only for its intended
purposes as according to the
specifications outlined in the operating
instructions.
• Keep hands, long hair, loose clothing and
articles such as necklaces or ties away
from the front of the rollers to avoid
entanglement and entrapment.
• Avoid contact with the rollers during
operation or shortly after the laminator
has been turned off. The rollers can
reach temperatures in excess of 300ºF.
Specyfikacje produktu
| Marka: | GBC |
| Kategoria: | System laminowania |
| Model: | Pinnacle 27 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z GBC Pinnacle 27, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje System laminowania GBC
4 Stycznia 2025
5 Grudnia 2024
7 Października 2024
27 Września 2024
27 Września 2024
5 Września 2024
5 Września 2024
4 Września 2024
30 Sierpnia 2024
28 Sierpnia 2024
Instrukcje System laminowania
- Lervia
- Tracer
- Royal Sovereign
- SEAL
- Hema
- Aurora
- Sencor
- Fellowes
- DESQ
- Q-CONNECT
- Rexel
- Quigg
- Ednet
- Olympia
- Nedis
Najnowsze instrukcje dla System laminowania
2 Marca 2025
9 Lutego 2025
9 Stycznia 2025
4 Stycznia 2025
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
4 Października 2024