Instrukcja obsługi GE GPF425W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GE GPF425W (8 stron) w kategorii Pomywaczka. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 2 użytkowników na średnio 4.6 gwiazdek

BEFORE YOU BEGIN

Read these instructions completely

and carefully.

IMPORTANT – Save these instruc-

tions for local inspector’s use.

IMPORTANT – Observe all governing

codes and ordinances.

Note to Installer – Be sure to leave these

instructions with the Consumer.

Note to Consumer – Keep these instructions

with your Owner’s Manual for future

reference.

Installation

Instructions

1/4" Custom Dishwasher

Door and Access Panel Kit

GPF425 Series Kit

GPF425A-Almond Trim Kit, GPF425B-Black Trim Kit,

GPF425C-Bisque Trim Kit, GPF425W-White Trim Kit

WARNING:

To prevent electric shock, disconnect electri-

cal power supply to dishwasher before

changing panels. Do not operate dishwasher

while changing panels or when lower access

panel assembly is removed.

TOOLS AND MATERIALS REQUIRED:

• 1/4" socket driver

• Phillips screwdriver

• Electric drill

• 1/8" drill bit

• Masking tape

• Safety glasses

• Gloves to protect against sharp edges

KIT INCLUDES:

•Left, right and bottom door trim

•Top and bottom access panel trim

•Color matched screws

STOP

INSTALLATION OPTIONS

This trim kit is designed to accommodate 1/4"

thick panels. A raised panel screwed or glued to

1/4" thick backing can be used. The raised

portion of the panel must be fabricated to

permit clearances for the trim on all sides.

•“X” Clearance shown at the bottom of the

raised panel must be maintained to prevent

the door from striking the access panel when

opened.

AppearanceTotal “X”

PanelBacking ThicknessClearance

3/4"1/4" 1"2"

1/2"1/4" 3/4"1-7/8"

A 3/4" thick custom panel may be installed by

routing the top and sides to 1/4" thickness. The

bottom edge, Dimension “X”, should be 1-1/2"

high and 1/4" thick.

IMPORTANT!

GPF100 Dishwasher Door Spring Kit

MUST BE installed when custom

door panels weigh 4 pounds or more.

18-7/8"

1/4" Min. Clearance

23-9/16"

Appearance

Panel

1/4"

Thick

Panel 1/8" Min.

Clearance

1/8" Min.

Clearance

X

Clearance

3-11/16"

1/4" Min. Clearance

All Sides

29-9/16"

Access Panel

Specyfikacje produktu