Instrukcja obsługi GE Profile JGP932KEDCC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GE Profile JGP932KEDCC (32 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 3 użytkowników na średnio 4.8 gwiazdek

TOOLS YOU WILL NEED

1

MATERIALS YOU MAY NEED

229C4053P520-2

31-10537-2 05-03 JR

BEFORE YOU BEGIN

Read these instructions completely

and carefully.

•IMPORTANT —Save these

instructions for local inspector’s use.

•IMPORTANT —Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these

instructions with the Consumer.

•Note to Consumer – Keep these

instructions for future reference.

•Product failure due to improper installation

is not covered under the Warranty.

WARNING —This appliance must

be properly grounded.

•IMPORTANT — Leak testing of the

appliance shall be conducted according to

the manufacturer’s instructions.

•Proper installation is the responsibility

of the installer and product failure due to

improper installation is NOT covered under

warranty.

IN THE COMMONWEALTH OF

MASSACHUSETTS:

• This product must be installed by a

licensed plumber or gas fitter.

• When using ball-type gas shut-off valves,

they shall be the T-handle type.

• A flexible gas connector, when used, must

not exceed 3 feet.

PARTS INCLUDED

2 Hold

Down Brackets

Shut Off ValvePipe Fittings

CSA-Approved Flexible Gas Line

3/8″Min. ID, 1/2″NPT Connection,

3-foot Maximum Length (Massachusetts Only)

Joint Sealant

Saber Saw

Pencil

Safety Glasses

1/8″Drill Bit & Electric

or Hand Drill

Ruler or Straightedge

Foam Tape

2 Screws

Phillips Head

Screwdriver

Pipe Wrench

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: www.GEAppliances.com

In Canada, call 1.800.361.3400 or Visit our Website at: www.geappliances.ca

Installation

30″Sealed Gas Cooktop

InstructionsJGP328, JGP932, JGP933

Specyfikacje produktu