Instrukcja obsługi Generac QT13068KVSCR

Generac nieskategoryzowany QT13068KVSCR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Generac QT13068KVSCR (96 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.7 gwiazdek

Pobierz PDF

Strona 1/96

Cover198 Rev. C 07/12 Part No. 0J0216



SECTION PAGE

INTRODUCTION .................................................................... 1-1

SAFETY RULES ....................................................................1-2

IDENTIFICATION RECORD ....................................................2-1

EQUIPMENT DESCRIPTION ..................................................3-1

Equipment Description ..........................................................3-1

Engine Oil Recommendations ................................................3-1

Coolant Recommendations ...................................................3-1

ENGINE PROTECTIVE DEVICES ............................................4-1

Engine Protective Devices .....................................................4-1

FUEL SYSTEMS ...................................................................5-1

SPECIFICATIONS ..................................................................6-1

GENERAL INFORMATION .....................................................7-1

Alternator AC Lead Connections ............................................7-1

Alternator Power Winding Connections ..................................7-1

CONTROL PANEL .................................................................8-1

Control Panel Interface ..........................................................8-1

Activate the Generator ...........................................................8-1

Display Interface Menus ........................................................8-1

Setting the Exercise Timer .....................................................8-3

User Adjustable Settings .......................................................8-3

Fuel Conversion ....................................................................8-3

Operation .............................................................................. 8-3

Auto Start .............................................................................8-4

Manual Start .........................................................................8-4

Alarm and Warning Messages ...............................................8-4

Common Alarm Relay ...........................................................8-6

Maintenance Alerts ............................................................... 8-6

Menu System ........................................................................8-7

OPERATION .......................................................................... 9-1

Stationary Emergency Generator Control and Operation ......... 9-1

Operating Unit with Manual Transfer Switch ...........................9-1

Operating Unit with Automatic Transfer Switch ......................9-1

MAINTENANCE ................................................................... 10-1

Maintenance Performed by Authorized Service Dealers .......10-1

Cooling System...................................................................10-1

Checking Fluid Levels ..........................................................10-1

Maintenance Owner/Operator Can Perform .......................... 10-2

Miscellaneous Maintenance ................................................ 10-3

SERVICE SCHEDULE ..........................................................11-1

TROUBLESHOOTING ..........................................................12-1

Troubleshooting Guide .........................................................12-1

EMISSIONS WARRANTY .................................................... 13-1

NOTES

EXPLODED VIEWS & PARTS LISTS

WIRING DIAGRAMS & SCHEMATICS

Content050 Rev. A 10/10

Table of Contents

INTRODUCTION

Thank you for purchasing this model of the stationary emergency

generator product line.

Every effort was expended to make sure that the information and

instructions in this manual were both accurate and current at the

time the manual was written. However, the manufacturer reserves

the right to change, alter or otherwise improve this product(s) at

any time without prior notice.

READ THIS MANUAL THOROUGHLY

If any portion of this manual is not understood, contact the nearest

Service Dealer for starting, operating and servicing procedures.

Throughout this publication, and on tags and decals affixed to the

generator, DANGER, WARNING, CAUTION and NOTE blocks are

used to alert personnel to special instructions about a particular

service or operation that may be hazardous if performed incor-

rectly or carelessly. Observe them carefully. Their definitions are

as follows:

INDICATES A HAZARDOUS SITUATION OR ACTION WHICH, IF

NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.

Indicates a hazardous situation or action which, if not

avoided, could result in death or serious injury.

Indicates a hazardous situation or action which, if not

avoided, could result in minor or moderate injury.

NOTE:

Notes contain additional information important to a procedure

and will be found within the regular text body of this manual.

These safety warnings cannot eliminate the hazards that they

indicate. Common sense and strict compliance with the special

instructions while performing the service are essential to prevent-

ing accidents.

Four commonly used safety symbols accompany the DANGER,

WARNING and CAUTION blocks. The type of information each

indicates is as follows:

n This symbol points out important safety information that,

if not followed, could endanger personal safety and/or

property of others.



This symbol points out potential explosion hazard.

This symbol points out potential fire hazard.

This symbol points out potential electrical shock hazard.

The operator is responsible for proper and safe use of the equip-

ment. The manufacturer strongly recommends that the operator

read this Owner's Manual and thoroughly understand all instruc-

tions before using this equipment. The manufacturer also strongly

recommends instructing other users to properly start and operate

the unit. This prepares them if they need to operate the equipment

in an emergency.

For safety reasons, the manufacturer recommends that this

equipment be installed, serviced and repaired by a Service

Dealer or other competent, qualified electrician or installation

technician who is familiar with applicable codes, standards and

regulations. The operator also must comply with all such codes,

standards and regulations.

OPERATION AND MAINTENANCE

It is the operator's responsibility to perform all safety checks, to

make sure that all maintenance for safe operation is performed

promptly, and to have the equipment checked periodically by a

Service Dealer. Normal maintenance service and replacement of

parts are the responsibility of the owner/operator and, as such,

are not considered defects in materials or workmanship within the

terms of the warranty. Individual operating habits and usage con-

tribute to the need for maintenance service.

Proper maintenance and care of the generator ensure a minimum

number of problems and keep operating expenses at a minimum.

See a Service Dealer for service aids and accessories.

Operating instructions presented in this manual assume that the

generator electric system has been installed by a Service Dealer or

other competent, qualified contractor. Installation of this equipment

is not a “do-it-yourself” project.

HOW TO OBTAIN SERVICE

When the generator requires servicing or repairs, simply contact

a Service Dealer for assistance. Service technicians are factory-

trained and are capable of handling all service needs.

When contacting a dealer about parts and service, always supply

the complete Model Number, Serial Number and Type Code (where

applicable) from the DATA LABEL that is affixed to the unit.

1-1

Safety004 Rev. F 05/10

Safety Instructions

n SAVE THESE INSTRUCTIONS – The manufacturer suggests that these rules for safe operation be copied and posted in potential

hazard areas. Safety should be stressed to all operators, potential operators, and service and repair technicians for this

equipment.

Specyfikacje produktu

Marka:	Generac
Kategoria:	nieskategoryzowany
Model:	QT13068KVSCR
Kolor produktu:	Gold,White
Źródło zasilania:	Prąd przemienny
Napięcie wejściowe AC:	100 - 240 V
Waga produktu:	1006.57 g
Szerokość opakowania:	97.5 mm
Wysokość opakowania:	194.2 mm
Głębokość opakowania:	276 mm
Zasilacz sieciowy:	Tak
Szybkie ładowanie:	Nie
Waga wraz z opakowaniem:	1381.27 g
Wysokość skrzyni wzorcowej (zewnętrznej):	220 mm
Długość skrzyni głównej (zewnętrznej):	296 mm
Waga brutto obudowy głównej (zewnętrznej):	3042.06 g
Szerokość skrzyni zbiorczej (zewnętrznej):	211 mm
Rodzaj opakowania:	Pudełko
Zmywalny:	Nie
Produkty w skrzyni głównej (zewnętrznej):	2 szt.
Lampka kontrolna:	Tak
Łatwy w użyciu:	Tak
Pokrowiec do przechowywania:	Tak
Technologia usuwania włosów:	Intensywne światło impulsowe (IPL)
Końcówka do ciała:	Tak
Obszary ciała:	Abdomen,Back thigh,Bikini,Buttocks,Front thigh,Inner upper arms,Outer thigh,Outer upper arms,Palms,Waist
Regulowana intensywność:	Tak
Światło płynące (max):	- J/cm²
Filtr ultrafioletowy (UV):	Tak
Liczba poziomów intensywności:	10
Precyzyjna końcówka (do twarzy):	Tak
Czujnik odcienia skóry:	Tak
Ilość trybów:	3
Mokry & Suchy:	Nie
Żywotność lampy (liczba błysków):	400000
Tryb łagodny:	Tak
Przebadane klinicznie:	Tak
Liczba błysków:	400000
Zmienne napięcie:	Tak