Instrukcja obsługi Genesis Seaborg 400
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genesis Seaborg 400 (2 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 11 użytkowników na średnio 5.0 gwiazdek
Strona 1/2
Component Checklist
Step 1. Component Checklist
Check you have received all parts against the Component Checklist above.
Hardware
Mounting Fasteners
Step 2. Remove the Wall Bracket Cover
[B] Nylon
Anchor (x2)
[C] M4 Washer (x4)
[D] M5 Washer (x4)
[A] Wall Mount
Screw (x2)
[J] M6x8mm / [K] M6x12mm (x4 each)
[F] M4x8mm / [G] M4x12mm (x4 each)
[H] M5x8mm / [I] M5x12mm (x4 each)
[E] M6 Washer (x4)
TOOLS REQUIRED:
ps Head Screw Driver
3/16”) Drill Bit
5/16”) Masonry Drill Bit
Remove the two Locking Screws,
on both left and right sides.
Step 3. Remove the Mounting Plate
Step 4. Fix the Wall Bracket to the Wall
Using the Wall Plate as a drilling template, choose from one of the following Mounting options, 7LPEHU6WXG250DVRQU\:DOO.
'ULOOWZRKROHVPP
GHHSZLWKDPP
GULOOELW
Masonry Wall
Nylon Anchor
(x2)
Wall Mount Screw (x2)
Wall Plate
M6 Washer (x2)
Wall Plate
Wall Mount Screw (x2)
M6 Washer (x2)
Timber Stud
'ULOOWZRKROHVPP
GHHSZLWKDPP
0DVRQU\GULOOELW
LIFT
TH-2250-VTP
(fully assembled)
IMPORTANT INFORMATION
,03257$17,QVWDOO:DOO0RXQWDVSHU,QVWDOODWLRQ,QVWUXFWLRQV
! Wall Mount supports Displays weighing up to 30kg (66lbs), with VESA hole configurations:
50x50mm, 75x75mm, 100x100mm, 200x100mm, 200x200mm.
! The Manufacturer accepts no responsibility for incorrect installation.
Cover
Locking
Screw (x2)
PULL
PULL
TH-2250-VTP Flat Screen Wall Mount lTilt
Installation Instructions
Step 6. Fasten the Mounting Plate to your Display
Mounting Screw (x4)
Choose appropriate Mounting Screws
and Washers from the Hardware
supplied to suit your Display.
Washer (x4)
Top of
Display
Mounting Plate
Step 7. Attach the Display to the Wall
Step 8. Tilt Adjustment
Locking
Screw (x2)
Hook the Mounting Plate
onto the Wall Bracket.
Wall Bracket
Mounting Plate
Re-insert the two
Locking Screws
on boths sides.
Display
bb
( required)
Tighten the Lever to lock the
Display in the desired position.
Step 5. Reinstall Wall Bracket Cover
Push the two pieces of
the Cover together.
PUSH
PUSH
TILT
TILT
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 1 7.01.11 ©
LOOSEN
Loosen the Lever before adjusting tilt.
TIGHTEN
Lever
LOWER
Specyfikacje produktu
| Marka: | Genesis |
| Kategoria: | Kontroler |
| Model: | Seaborg 400 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Genesis Seaborg 400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kontroler Genesis
30 Grudnia 2025
22 Września 2024
31 Sierpnia 2024
Instrukcje Kontroler
- Kontroler JBL
- Kontroler Schneider
- Kontroler IK Multimedia
- Kontroler Manhattan
- Kontroler Lindy
- Kontroler IPEGA
- Kontroler MOZA
- Kontroler Homematic IP
- Kontroler Blizzard Lighting
- Kontroler Spektrum
- Kontroler Perel
- Kontroler LYYT
- Kontroler Lumens
- Kontroler Alfatron
- Kontroler Dangerous Music
Najnowsze instrukcje dla Kontroler
2 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
28 Marca 2025
27 Marca 2025
26 Marca 2025
2 Marca 2025