Instrukcja obsługi Genexis Fiberbox XGS2110

Genexis Niesklasyfikowane Fiberbox XGS2110

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genexis Fiberbox XGS2110 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
PLEASE READ THIS PRODUCT GUIDE AND SAFETY INSTRUCTIONS BEFORE
INSTALLING OR USE OF THE PRODUCT. AS RECIPIENT OF THE PRODUCT,
YOU ARE RESPONSIBLE TO GET FAMILIAR WITH THE PRODUCT GUIDE AND
SAFETY INSTRUTIONS BEFORE USING THE PRODUCT. CONTACT YOUR SERVICE
PROVIDER IN CASE OF ANY QUESTIONS.
Connecting the FiberBox
1. Open the green shuer from
the WAN port, insert the ber
outlet into the WAN port.
2. Connect your gateway to the
LAN (10GE) port via an RJ45
network cable. A CAT6 cable
or beer is recommended.
3. Connect the supplied power
adapter to the FiberBox and
plug the adapter into a
power socket.
4. Press the ON/OFF buon to
power on the device.
Warning: This product
contains a laser that emits
invisible light. It is a Class 1
Consumer Laser product
according to EN 50689:2021.
However, it is still advised to
not look directly into the ber
connector when the product is
powered on.
Warning: Do not cover the
device, this will interfere with
the ventilation.
Ambient Operating
Temperature: 32°F ~ 104°F


Specyfikacje produktu

Marka: Genexis
Kategoria: Niesklasyfikowane
Model: Fiberbox XGS2110

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Genexis Fiberbox XGS2110, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą