Instrukcja obsługi Gigabyte GA-8I848P-G

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte GA-8I848P-G (104 stron) w kategorii płyta główna. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 9 użytkowników na średnio 4.5 gwiazdek

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X/8X (1.5V) notch"(show below), please make sure your

AGP card is AGP 4X/8X (1.5V).

Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/

G) / 850(E) / E7205 / 865(G/PE/PL/P) / 875P / 848P. You might

experiencesystem unable to boot up normally. Please insert an AGP

4X/8X card.

Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X

mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)

mode by adjusting the jumper. The factory default for this card is

2X(3.3V). The GA-8I848P(-G) (or any AGP 4X/8X only) motherboards

might not function properly, if you install this card without switching the

jumper to 4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",

the graphics card manufacturer & some SiS 305 cards, their golden finger

is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X

(3.3V) only. The GA-8I848P(-G) (or any AGP 4X/8X only) motherboards

might not function properly, If you install this card in it.

Note: Although Gigabyte's AG32S(G) graphics card is based on ATi Rage

128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)

specification. Therefore, AG32S(G) will work fine with Intel® 845(GE/PE) /

845(E/G) / 850(E) / E7205 / 865(G/PE/PL/P) / 875P / 848Pbased

motherboards.

AGP 4X/8X notch

Specyfikacje produktu