Instrukcja obs艂ugi Gigabyte GA-8I865PE-TW


Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Gigabyte GA-8I865PE-TW (96 stron) w kategorii p艂yta g艂贸wna. Ta instrukcja by艂a pomocna dla 4 os贸b i zosta艂a oceniona przez 2.5 u偶ytkownik贸w na 艣rednio 3.6 gwiazdek

Strona 1/96
When you are installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has "AGP
4X/8X (1.5V) notch"(show below), please make sure your AGP card
is AGP 4X/8X (1.5V).
Caution: AGP 2X card is not supported by Intel 845(GE/PE) / 845(E/
G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system
unable to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)
mode by adjusting the jumper. The factory default for this card is
2X(3.3V). The GA-8I865PE-TW (or any AGP 4X/8X only) motherboards
might not function properly, if you install this card without switching the
jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger
is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X
(3.3V) only. The GA-8I865PE-TW (or any AGP 4X/8X only) motherboards
might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel 845(GE/PE) /
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.
AGP 4X/8X notch


Specyfikacje produktu

Marka: Gigabyte
Kategoria: p艂yta g艂贸wna
Model: GA-8I865PE-TW

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Gigabyte GA-8I865PE-TW, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮