Instrukcja obs艂ugi Gigabyte GA-8PE667 Ultra 2
                    Gigabyte
                    
                    p艂yta g艂贸wna
                    
                    GA-8PE667 Ultra 2
                
                                
    Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Gigabyte GA-8PE667 Ultra 2 (112 stron) w kategorii p艂yta g艂贸wna. Ta instrukcja by艂a pomocna dla 18 os贸b i zosta艂a oceniona przez 9.5 u偶ytkownik贸w na 艣rednio 4.3 gwiazdek
                        Strona 1/112
                    
                    
                    
    When you installing AGP card, please make sure the following
    notice is fully understood and practiced. If your AGP card has
   "AGP 4X(1.5V) notch"(show below), please make sure your AGP
card is
 AGP 
4X(1.5V).
    Caution: AGP 2X(3.3V) card is not supported by Intel
庐 845(GE/PE) /
845(E/G) / 850(E). You might experience system unable to boot up
normally. Please insert an AGP 4X(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-8PE667 Ultra2 / GA-8PE667 Pro(or any AGP 4X only)
motherboards might not function properly, if you install this card without
switching the jumper to 4X(1.5) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by
"Power Color", the graphics card manufacturer & some SiS 305 cards,
their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot,
but they support 2X(3.3V) only. The GA-8PE667 Ultra2 / GA-8PE667 Pro
(or any AGP 4X only) motherboards might not function properly, If you
install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work
fine with  Intel庐
845(GE/PE) /845(E/G) / 850(E) based motherboards.
Before you install PCI cards, please remove the Dual BIOS
label from PCI slots if there is one.
Specyfikacje produktu
| Marka: | Gigabyte | 
| Kategoria: | p艂yta g艂贸wna | 
| Model: | GA-8PE667 Ultra 2 | 
| Kolor produktu: | Czarny | 
| Liczba 藕r贸de艂 艣wiat艂a: | 2 szt. | 
| Rodzaj 偶ar贸wki: | Halogen | 
| Typ kontroli: | Dotyk | 
| Wbudowany wy艣wietlacz: | Tak | 
| Wysoko艣膰 produktu: | 433 mm | 
| Szeroko艣膰 produktu: | 915 mm | 
| Waga produktu: | 18000 g | 
| Poziom ha艂asu: | 53 dB | 
| Obci膮偶enie: | 220 W | 
| Klasa wydajno艣ci energetycznej: | C | 
| Waga wraz z opakowaniem: | 24000 g | 
| Model: | Na艣cienny | 
| Roczne zu偶ycie energii: | 117 kWh | 
| Maksymalna moc ekstrakcji: | 625 m鲁/h | 
| Rodzaj ekstrakcji: | Kana艂owy | 
| Rodzaj filtra t艂uszczu: | W臋giel | 
| Moc silnika: | 180 W | 
| Maksymalna moc recyrkulacji: | - m鲁/h | 
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Gigabyte GA-8PE667 Ultra 2, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje p艂yta g艂贸wna Gigabyte
                        
                         10 Marca 2025
                        
                    
                                                            
                        
                         2 Marca 2025
                        
                    
                                                            
                        
                         2 Marca 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            
                        
                         11 Lutego 2025
                        
                    
                                                            Instrukcje p艂yta g艂贸wna
Najnowsze instrukcje dla p艂yta g艂贸wna
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         3 Kwietnia 2025
                        
                    
                                                            
                        
                         2 Kwietnia 2025
                        
                    
                                                            
                        
                         2 Kwietnia 2025
                        
                    
                                                            
                        
                         2 Kwietnia 2025
                        
                    
                                                            
                        
                         30 Marca 2025