Instrukcja obsługi Hager 80040001

Hager nieskategoryzowany 80040001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager 80040001 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Berker GmbH & Co. KG, Zum Gunterstal, 66440 Blieskastel, Germany - + 49 6842 945 0 + 49 6842 945 4625 info@berker.de berker.comT F

Operating and

assembly instructions

8004 00 0x

Busapplicationunitﬂush-

mounted,system-/easylink

01.2023

(1)

(5)

(4)

(5)

(2)

(3)

(5)

(8)

(7)

(6)

Safety instructions z

Electrical equipment may only be installed and

assembledbyqualiﬁedelectricians.Always

followtherelevantaccidentpreventionregulati-

ons.

Failuretocomplywiththeseinstallationinstruc-

tionsmayresultindamagetothedevice,ﬁreor

otherhazards.

Wheninstallingandlayingcables,alwayscomply

withtheapplicableregulationsandstandardsfor

SELVelectricalcircuits.

Duringrenovationwork,protectthedevicefrom

pollutionbypaint,wallpaperpaste,dustetc.The

devicecanbedamaged.

Theseinstructionsareanintegralcomponentof

theproductandmustberetainedbytheend

user.

Designandlayoutofthedevice

Figure 1: Front view

Figure 2: Rear view

(1) Illuminated programming button

(2) Mounting device for fastening clamps

(3) Dust protection cover for user interface (suitable

for labelling  eld sticker)

(4) User interface

(5) Screw holes for dismantling protection

(6) Plug-in interface for temperature sensor

(7) KNX bus connection terminal

(8) Attachment claws

Function

System information

This device is a product of KNX system and corre-

sponds to the KNX guidelines. Detailed specialised

knowledge obtained from KNX training courses

is required for comprehension. The planning, installa-

tion and commissioning are carried out with the help

of KNX-certi ed software.

systemlinkstart-up

The function of the device is software-dependent.

The software is to be taken from the product databa-

se. You can  nd the latest version of the product da-

tabase, technical descriptions as well as conversion

and additional support programmes on our website.

easylinkstart-up

The function of the device is con guration-depen-

dent. The con guration can also be done using

devices developed specially for simple setting and

start-up.

This type of con guration is only possible with

devices of the easy link system. easy link stands

for easy, visually supported start-up. Precon gured

standard functions are assigned to the in/outputs by

means of a service module.

Correct use

- Attaching application modules, e.g. push-button,

thermostat, to the KNX system

- Installation into wall box according to DIN 49073

Productcharacteristics

- Start-up and programming in S-mode and E-mode

- Localisation function by integrated buzzer (siren)

- Connection for external temperature sensor

- Integrated dust protection cover for protection of

the user interface

Information for electricians

Installation and electrical connection

DANGER!

Touchinglivepartsintheinstallation

environmentcanresultinanelectric

shock!

Anelectricshockcanbelethal!

Disconnecttheconnectingcables

beforeworkingonthedeviceand

coveralllivepartsinthearea!

Connectingandinstallingthedevice

Connect bus line via KNX bus terminal (7): red +,

black –.

Connect external temperature sensor via connec-

ting terminal (6) if necessary.

For mounting in a  ush-mounted wall box use

 xing claws (8) or in a hollow wall wall-box use

screws for  xing.

Mount the device into the wall box in the correct

position.

If no application module is mounted, close dust

protection cover for user interface.

6LE000469C

6LE000469C__80040001__BUSANKOPPLER-UP__GB__2021-03__manual_Arbeitsdatei.indd 1

6LE000469C__80040001__BUSANKOPPLER-UP__GB__2021-03__manual_Arbeitsdatei.indd 16LE000469C__80040001__BUSANKOPPLER-UP__GB__2021-03__manual_Arbeitsdatei.indd 1

23.01.2023 12:33:51

23.01.2023 12:33:5123.01.2023 12:33:51

Specyfikacje produktu

Marka:	Hager
Kategoria:	nieskategoryzowany
Model:	80040001
Materiał obudowy:	Metal
Zakres temperatur (eksploatacja):	-5 - 45 °C
Stopień ochrony IP:	IP20
Liczba dołączonych produktów:	1 szt.