Instrukcja obsługi Hager JN204BG

Hager nieskategoryzowany JN204BG

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager JN204BG (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 5.0 gwiazdek

Pobierz PDF

Strona 1/8

Installation instructions

Notice d’instructions

Bedienungsanleitung

Instrucciones de uso

Instruções

Bruksanvisning

Gebruiksaanwijzing

JN **B2

Invicta 3 Panelboard

All product(s) must be installed by a suitably competent

electrician giving consideration to their intended use and in

accordance with the current edition of BS 7671 (IET Wiring

Regulations).

The Electricity at Work regulations and the Health and Safety at

Work Act shall be complied with.

Only equipment and arrangements specified in Hager’s technical

documentation / catalogue shall be used

Install in the vertical plane only.

Notice:

To prevent potential overheating from loose connections the

installer shall check connections are tightened to the torque

levels stated in these instructions prior to energising this board.

This check should include factory made connections which may

have loosened in transit or as a result of.

ZD0695 4a issue

Fixing points with central keyhole

ZD0695 4a issue

Fit the MCCB to the pan assembly with the fixings provided (do not

tighten at this stage). Remove the 3 L1, x M8 coach bolts from the

L2 and L3 busbar. Fit the extension links (note the orientation of

the links ( )A . Fit the 3 x M8 Allen bolts (6mm Allen key). Do not

tighten at this stage.

JN2 3 Pole MCCB /MCS incomer kit

Connect the extension links to the busbar with the 3 x M8 coach

bolts. Hand tighten at this stage.

Now tighten the MCCB fixing screws to secure the MCCB to the

pan assembly.

Once the MCCB is in place tighten all electrical M8 connections to

13Nm

Fit the terminal shroud

250A pole incomer kit contains:3

• 1 x 3 pole MCCB/MCS

• 3 x line extension links

• 6 phase link Allen key bolts and washers

• 2 x long MCCB fixing screws

• 3 x M8 120mm lugs

Ensure terminal shrouds are removed before fitting

13mm A/F

6mm HEX

ZD0695 4a issue

Specyfikacje produktu

Marka:	Hager
Kategoria:	nieskategoryzowany
Model:	JN204BG
Wysokość produktu:	950 mm
Szerokość produktu:	710 mm
Głębokość produktu:	178.4 mm
Stopień ochrony IP:	IP30
Natężenie znamionowe:	250 A